heat exchanger used for sale

Plate heat exchanger SCHMIDT SIGMA 37 PBL stainless steel Volume: 15.5 and 14.5 l 165°C 6 bar Dimensions: 1520 x 570 x 590 mm

Air heat exchanger, control cabinet fan EBM R2E180-AT38-10 2 x 85 W 220 V Dimensions: 1820 x 480 x 120 mm

Air heat exchanger, enclosure fan RITTAL Techline SK3129 2 x 82 W 230 V Small piece broken off from fan cover ! used, tested ! Dimensions: 780 x 300 x 120 mm

Heat exchanger, radiator TERMOGAMMA WG 10W 400 V ALFA LAVAL CB 26 34H spare part for AGIE CUT 300 ! used, checked ! Dimensions: 540 x 500 x 520 mm

Heat exchanger PAGUS 04000020 Volume(primary / secondary): 3 / 4 l inner diameter Connections: Ø 20, 2x 24, 30 mm Dimensions(without connections): 530 x 120 x 105 mm used, tested ! Dimensions: 530 x 120 x 180 mm

Air Heat Exchanger, Control Cabinet Fan, Cooling Unit MAZAK TYPE HE-PB81 2 x Fan: TOBISHI FAN 7506XTP-10 100 V 1AC 50 / 60 Hz spare part for machining center MAZAK AJV25/405 !, among others! used, tested ! Dimensions: 1200 x 205 x 120 mm

Air Heat Exchanger, Control Cabinet Fan, Cooling Unit MAZAK TYPE HE-PB82 4 x Fan: TOBISHI FAN 7506XTP-10 100 V 1AC 50 / 60 Hz spare part for machining center MAZAK AJV25/405 !, among others! used, tested ! Dimensions: 1200 x 345 x 120 mm

Air / water heat exchanger, enclosure cooling unit RITTAL SK 3219100 Net cooling capacity: 4000 / 4350 W Operating pressure: 1 - 10 bar 0.27 / 0.41 kW 230 V 1AC 50 / 60 Hz used, tested ! Dimensions: 640 x 400 x 480 mm

Heat exchanger PAGUS CF40 2x Flange: CF40 Flange diameter: Ø 70 mm, fixed inner diameter: Ø 10 mm installation length: 125 mm outer sheath: Ø 40 mm, length: 100 mm Connections: Ø 10 mm Material: stainless steel New ! Dimensions: 170 x 125 x 70 mm

Heat exchanger, radiator SOFICA AR-780 Type 42 pmax.: 7 bar engine: 0.25 kW 230 / 400 V spare part for AGIE CUT 300 ! used, checked ! Dimensions: 540 x 500 x 520 mm

TMC PADOVAN MARGARINE & SHORTENING CONTINUOUS CRYSTALLIZER VOTATOR KOMBINATOR SCRAPE SURFACE HEAT EXCHANGER FOR MARGARINE AND SHORTENING CRYSTALLIZATION CYLINDER DIAMETER 40 CM CYLINGER LENGTH 220 CM WORKING PRESSURE 70 BAR COOLING GAS AMMONIA MOTOR POWER 45 KW YEAR: 2012

Conveyor screw, screw conveyor, conveyor technology, pipe conveyor screw, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, screw dryer, drying system, belt dryer for digestate, grain, wood chips, sewage sludge -Screw was designed for a heating plant to discharge the ashes and was not yet in use -Screw tube and screw are double-walled and can therefore be cooled or heated -Execution: stable -Inlet: 1380 x 340 mm -Spout and control flange: Ø 360 mm -Screw and body made of: 30W02/3 -without motor -Screw diameter: 300 mm -Diameter screw tube: 220 mm -Length of screw: approx. 7600 mm -Infeed pitch screw: 55 mm -Outlet slope auger: 215 mm -Dimensions: 9050/610/H1100 -Weight: 2600 kg

2-stage plate heat exchanger, Fabr. Fischer, type: Eurocal 18, operating overpressure 6 bar, YOC 1991

Manufacturer : Alfa Laval Model: Tetra Pak C10-KSM Year: 2013 Type: Plate heat exchanger / pasteurizer Application: Pasteurisation Exchange surface: 227.5 m2 Fluid group: 2 Liquid volume: 897.0 L Max. pressure: 10.0 bar Max. temperature: 120?C Sections: 5 Plates: 73 + 131 + 33 + 105 + 35

Manufacturer : Alfa Laval Model: Tetra pak C10-SM Year : 2005 Type: Plate heat exchanger Application: pasteurizer Fluid group: 2 Volume: 533 L Pressure: 0/16.0 bar Temperature: 0 / 110?C Sections: 5 Plates: 64 + 66 + 40 + 20 + 31 units

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 22,500 litre pressure vessel. This is a 22.5 cbm pressure vessel made of steel from the lined with an inner coating. Material S235JRG2 Steel . Container dimensions: Length : approx. 6,100 mm diameter: approx. 2,300 mm weight: approx. 5,500 kg Pressure: 10 Bar Shape: cylindrical ---------------------------------------------------------------------- --------------------- Of course, you can also help shape your tank system! All our systems are used in our company by selected employees extensively checked and checked. We also offer an inexpensive delivery on request. It is possible to  ...

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

KF Pasteuristationsanlagen Capacity 6600 liters per hour Control technology of the revised 2007 -Full documentation -Fully serviced

GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg

GEA plate sterilizer 4 sections max working pressure: 16 bar max working temperature: 140 St C

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675

MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820

MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120

JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340

GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532

JENBACHER TYPE 3 Heat Exchangers Charge Air Coolers Intercoolers 6141424 / 1212197 / 369829

MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511

MTU 8V396 TB 53 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 2930-12-334-9277 / 0052000675

MTU 16V4000 M 90 A BANK 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120

JENBACHER TYPE 4 J414 / J416 / J420 PNo: 1202340

GUSCOR HGM560 / SFGLD560 Part Number 7673532

Pasteur 500l/h Gas newly overhauled automatic temperature control

USED IRON 25 M2 BACHILLER TUBULAR EXCHANGER REF#: C9444 Tubular exchanger manufactured by BACHILLER with an exchange surface of 25 m2 General characteristics: Manufactured by BACHELOR Material Iron Year built 1996 Weight 4300 kg Shell Tubes Pression de conception 8 bar 8 bar Température de conception 300 ºC 180 ºC Test pression 20.7 bar 15 bar Volume 285 L 195 L Technical characteristics: Exchange surface 15 m2 Tubes passes 2 Casing passes 1

USED STAINLES STEEL 316L TALLERES MORES 10,5 M2 TUBULAR EXCHANGER REF.: C6296 General characteristics: Manufactured by TALLERES MORES2 Type Tubular exchanger Material Stainless steel 316L Year built 2000 Technical characteristics: Exchange surface 10,5 m2 Tubes passes 2 Casing passes 1 Tubes length 2490 mm Casing diameter 300 mm

available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation

2 pieces available. Rated power 1900 kw. Rated speed 1483 1/min. Nominal voltage 6000V. Size approx. 2x2m 2 pieces available. Rated power 1900 kw. Rated speed 1483 rpm. Rated voltage 6000V. Size about 2x2m

HTST MALISON DESCO READ CAPACITY : 500 L HEATING : HEATING ELEMENTS PRODUCT PUMP WATER PUMP BALANCE TANK CONTROL PANEL SPARE PARTS : WE HAVE HEATING ELEMENTS/ PT100 SENSOR/ CHARTS/ ETC. CONDITION : GOOD

High-speed high-temperature system with adjustable heat holder The machine can be started in a closed system or via supply tanks with pump control. Control via Siemens S7

There are five identical heat exchangers available, exchange surface: 88.2m², power: 128kW.

Manafacture: Lu-Ve Type: HCE 58 (LH) CU/AL Dimensions: 2350 x 1130 x 835 mm Fan diameter: 700 mm Fan power: 470 W Fan voltage: 230 V Coolant quantity: 18.88 dm³ Maximum pressure: 3 MPa