137,145 used machines on RESALE, but how to find them? Machine Search
Spine heating plate Schmedt PräPara; good condition; cleaned and tested; Max. Book height 640mm; Max. Block thickness 110mm; Adjustable inclination. Book cover heating plate Schmedt PräPara; good condition; cleaned and chekced; max.book hight 640mm; max.block thikness 110mm; adjustable in tilt.
Heating oil tank Tank system Diesel tank and other hazardous substances. 50,000 litres capacity according to EN 12285-2 standard, above ground, double-walled incl. officially recognized test certificate. Tank Environmental Protection Wozniack . Specialist company according to § 19 Water Resources Act (WHG) offers as follows. Storage tank 50,000 litres double-walled new according to EN 12285-2 standard . The container is new and will be equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling tube with TW closure (filling cap) and immersion tube, 1 bearing tube with dipstick and dipstick closure, 1 vent pipe with ventilation hood, 1 brand-new limit encoder with type approval (AIII)(new) 1 conductor Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9.000 kg Of course, y ...
On offer is a combined heat and power plant from the manufacturer Energiewerkstatt Hannover, model ASV 20/43. The complete engine was completely replaced about 1.5 years ago for approx. € 20,000.00 and is therefore to be considered as new. Technical data: Manufacturer: Energiewerkstatt Hannover Model: ASV 20/45 Gas Type: Natural Gas The plant is currently located at our customer's site near Hanover and is being sold due to restructuring. A viewing is recommended. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. It is also the buyer's responsibility to carry out any professional dismantling and loading of the assets. Since these are used assets, we sell them without guarante ...
Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
closed double-walled insulated stainless steel container (without agitator) with hinged cover. Bath heater / temperature sensor / temperature limiter / level probe and temperature display device.
Used Carrier 30 RB 0802 air cooled chiller. Complete with 12 Performer scroll compressors SH300A4ACA. Shell & tube evaporator/exchanger 284 ltr. Copper/alu condensor with 12 Axial fans with a total airflow of 54.167 l/s and Pro-dialog plus controling. Specifications Our inventory stock No. 13231 Brand Carrier Type 30 RB 0802 Product type Air Cooled Chiller Capacity kW 774,0 Capacity Tons 220,1 Refrigerant Freon Refrigerant Type R-410A Weight in kg. 6740 Sizes 7300x2250x2240 Compressor(s) type & model 12x Performer SH300A4ACA Display Pro-Dialog plus Number of fans 12 Fan specifications 960 RPM Remarks | Y.O.B. 2006 Amount in stock 2 We have hundreds of different chillers, see our other advertisements or visit our website.
Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.
Kroll heating mobile as hall heating, years of construction 194/95, see picture type plate
Heating oil tank - tank system - steel tank - diesel storage brand new - 100m³ capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 7011 iron grey. (Other RAL colours are also possible on request!) L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, dome covers an ...
Immediately available, 40,000 litres Above-ground, double-walled tank diameter 2,500 mm Length approx. 8,000 mm approved for heating oil and diesel Year of construction 1990 with test certificate Tank can be prepared/painted Otherwise immediately available, with common equipment
Tank-& Umweltschutz Wozniack Fachbetrieb nach Wasserhaushaltsgesetz Delivery time immediately Dear Sir or Madam, we offer a 10,000 liter double-walled storage tank for the storage of diesel. Heating oil or other hazardous substances as follows. Nominal capacity 10 cbm according to EN 12285-2 standard Piece 1. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to EN 12285-2 standard and type plate Piece. 1 dipstick Piece. 1 vent nozzle Piece. 1 filler neck Piece. 1 new limit value transmitter Piece. 1 new leak detector with filled leakage liquid Piece. 1 ladder Piece. 1 removal sleeve Form. cylindrical storage tank with feet/bracket Container dimensions length approx. 5,300 mm Diameter approx. 1,600 mm Weight approx. 1.800 kg Storage above ground Top on offer . Liquid ferti ...
Tank-& Umweltschutz Wozniack Fachbetrieb nach Wasserhaushaltsgesetz Delivery time immediately Dear Sir or Madam, we offer a 50,000 liter double-walled storage tank for the storage of diesel. Heating oil or other hazardous substances as follows. Nominal capacity 50 cbm Piece 1 Bring in colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to EN 12285-2 standard and type plate Piece. 1 dipstick Piece. 1 vent nozzle Piece. 1 filler neck Piece. 1 new limit value transmitter Piece. 1 new leak detector with filled leakage liquid Piece. 1 ladder Piece. 1 removal sleeve Form. cylindrical storage tank with feet/bracket Container dimensions length approx. 10900 mm Diameter approx. 2,500 mm Weight approx. 9000 kg Storage above ground Top on offer . Liquid fertilizer - ...
Lauda ITH150 / 6KW heat transfer system LSI 51337 circulator 20 - 350°C. The plant was dismantled during operation. The insulated metal flexible hoses come along. They have 12mm Swagelok clamping ring fittings. The original description for all relevant components and the system itself is part of the delivery.
CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...
CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...
2 identical thermal oil boilers for industrial process heat supply are offered. Equipped with: attached burner system, thermal oil piping connections, circulation/pump components, valves and monitoring devices, insulated piping, stainless steel cladding, integrated viewing/inspection area at the boiler front. Inspection possible by appointment.
The unit consists of a boiler with a powerful gas burner, Buderus control system and a complete DUNGS gas valve section. Technical data boiler: - Nominal heat output Pn: 491–590 kW - Rated heat output Qn: 531–641 kW - Permissible operating pressure: 6 bar - Test pressure: 10.8 bar - Max. operating temperature: 120 °C - Water capacity: approx. 1,187 l - Fuse: 10 A Gas burner: - Manufacturer: Weishaupt - Type: WM-G10/3-A monarch - Year of construction: 2007 - Fabr.-Nr.: 5737463 - Gas blower burners of the Monarch series - Power range: 100–1,000 kW - Gas type: natural gas - Connected pressure: 15–500 mbar - Degree of protection: IP54 - Control voltage: 230 V / 50 Hz - Power supply: 400 V / 3~ / 50 Hz - Motor power according to the nameplate: approx. 1.82 kW Regulation: - Buderus R4311 - Ser. No.: 63036160-20-7015-0016 - Power supply: 230 V / 50 Hz - ...
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
HOT AIR GENERATOR model FABBRI F240 second hand machine with n.01 additional fan for fumes expulsion with piping for hot air conveyance CE marks: Yes volt. 380 / 50 APPROXIMATE SURFACE TO HEAT UP: m² 1.000 main fan electrical motor power Hp 4 additional smoke expulsion fan motor power Hp 0,75 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law. Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by on ...
Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985
used
T9STELA AIR HEATER indirect 2000 KW, SLI 2000; Weishauptbrenner L9T OIL Tel. 01715213204
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
Key data: 537 , 400
Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...
Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the co ...
Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...
General Description Batch of industrial heaters in AISI and Inconel, all allocated to work order board position D8 . Total quantity: 991 pcs . Technical Details Work order board position: D8 Material types: AISI, AISI with M4 threaded bolt, INC (Inconel) Heater diameters: 6.5 mm, 8.1 mm, 8.5 mm Length range: 645–1,530 mm depending on item Resistance range: 8–195 Ω depending on item Item List 1) AISI, Ø 6.5, 1030–1040 mm, 8–9 Ω, 16 pcs 2) AISI, Ø 6.5, 755–765 mm, 18–19 Ω, 47 pcs 3) AISI, Ø 6.5, 1340–1350 mm, 193–195 Ω, 200 pcs 4) AISI, Ø 8.1, 1230–1240 mm, 20–21 Ω, 40 pcs 5) AISI, Ø 6.5, 1520–1530 mm, 80–82 Ω, 22 pcs 6) AISI, Ø 6.5, 1445–1455 mm, 54–55.5 Ω, 200 pcs 7) AISI, Ø 6.5, 1445–1455 mm, 26–28 Ω, 26 pcs 8) AISI, Ø 6.5, 875–885 mm, 13 Ω, 36 pcs 9) AISI / M4 threaded bolt, Ø 8.1, 770 mm, 18 Ω, 22 pcs 10) AISI ...
Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging ...
Sealing device SG-Verpackungen U 22, with base frame and foil, adjustable temperature sealing plate Connection 230V, dimensions LxWxH approx. 80x55x100cm, weight approx. 41kg, used, functional
maximum number of results exceeded
please refine your search
2.000 € 
