heat exchanger used for sale

We offer as follows: 2 pieces Jenbacher CHP type JMS 316 GS-C21 Generator: inchAVKinch 1110 kVA Technical data: Engine power approx. 1922kW electrical power: approx. 736kW electrical efficiency approx. 38.3% Thermal power: approx. 912 kW Thermal efficiency: approx. 46.9% Built: 2000 The plants sing needed. The sale is subject to any warranty.

Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550?C useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

nett cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) steam heated max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed

Type HLP Voltage 220 V Power 400 W Length 120 mm Diameter 8 mm Made in Germany Weight 70 g

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

Viessmann Vitoplex 200 oil/gas boiler 900 kW with Weishaupt gas burner Manufacturer: Viessmann Model: Vitoplex 200 Type: Oil/Gas Boiler Nominal heat output for oil and gas: 900 kW Rated rated heat output: 978 kW Boiler capacity: 1325 l Permissible operating pressure: 6 bar Permissible operating temperature: 110 °C Standards: EN 14394 / TRD 702 / TS EN 303-1 / TS EN 303-3 Location: Paderborn Burners: Manufacturer: Max Weishaupt GmbH Burner type: WM-G10/4-A monarch Design: ZM Serial Number: 40457248 Year of manufacture: 2018 Country of destination: DE Category: II2R3R Gas Type: N Power range: min. 110 kW / max. 1250 kW Connected pressure: min. 100 mbar / max. 2500 mbar NOx class: 2 Control voltage: 230V 1~50Hz Mains voltage: 400 V 3~ N PE 50 Hz Electrical power: 2.16 kW Degree of protection: IP54

Length 1155mm Thread diameter 47 mm Power 1500 W Voltage 230 V Transport dimensions 1220x70x70 mm Weight 0,8 kg

Key data: 22 KW, 27 kVA, 400 V

For sale is a Mephisto G22 combined heat and power plant with 22 kW nominal electrical output. The plant has only been in operation for a few years, has a comparatively short running time and still has many remaining production hours. Technical data (version of mains-parallel operation): 22 kW electrical power approx. 27.5 kVA apparent power 400 V, 3-phase, 50 Hz The CHP plant has been regularly serviced and is in good condition. Further technical documents and operating hours are available on request. This includes both a pump group and 2 buffer tanks. The device is no longer used due to renovation and was hardly operated over the years.

Many thanks for your interest in our machinery, please find below our offer: Combined heat and power plant (CHPU)with up to 500KW A total of 3 independent cogenerators with combined heat and power; Electricity & hot water With only max 13280 operation hours! Operation is done with heating oil ! Permission available Total power approx. 500kw, cascade connection, in depending on power requirements, the various energy producers gradually switch on and regulate themselves on the performance. At peak load, all 3 systems work in parallel with full output Ideal for power supply in remote areas without public supply or as emergency power supply with simultaneous heat recovery if desired. Each engine has a heat exchanger. If heat is not needed, it can also be removed. The plant is constructed and ready, accordingly control etc. Top maintained. Spare parts for maintenance etc. av ...

Key data: 2500 KW, 10500 V

New industrial gas generator set based on MTU Series 4000 engine. Designed for reliable continuous power generation in industrial facilities, CHP plants, and energy projects. Key specifications • Engine: MTU 20V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 2500 kW • Frequency: 50 Hz • Speed: 1500 rpm • Configuration: V-20 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Energy projects and microgrids Condition: New Availability: On request Location: Europe Contact for detailed technical documentation and price PM: infobscgroup.eu

Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 2000 KW, 10500 V

New industrial gas generator set based on the MTU Series 4000 engine platform. Designed for reliable continuous power generation and combined heat and power (CHP) applications. Key Specifications • Engine model: MTU 16V4000 L64 FNER • Fuel: Natural gas / biogas • Electrical output: approx. 2000 kW • Speed: 1500 rpm • Frequency: 50 Hz • Configuration: V-16 gas engine • Electrical efficiency: up to 44 % Applications • CHP power plants • Industrial power supply • Data centers • Distributed energy systems and microgrids Condition: New Availability: On request Location: Europe Contact for price, delivery time and detailed technical documentation PM : infobscgroup.eu

Heat exchanging type: VES 8''SX 1 FV minimum temperature: -10 St C pressure: 18 bar not used

Key data: 2300 KW, 10500 V

High-efficiency industrial gas generator set based on the proven MWM TCG 3020 V20 engine platform. Designed for reliable continuous operation in power generation and combined heat and power (CHP) applications. The unit offers high electrical efficiency, long maintenance intervals, and excellent fuel flexibility, making it suitable for natural gas, biogas, landfill gas, and other gaseous fuels. Key Specifications • Engine model: MWM TCG 3020 V20 • Configuration: V-20 gas engine • Electrical output: up to 2300 kW • Rated speed: 1500 rpm • Frequency: 50 Hz • Fuel type: Natural gas / Biogas / Landfill gas • Electrical efficiency: up to 45 % • Total efficiency (CHP): up to 87 % Technical Highlights • Proven MWM TCG 3020 series engine platform • Long service intervals (up to 80,000 operating hours overhaul interval) • Optimized for high-effi ...

Key data: 1500 KW, 400 V

New industrial gas generator set based on the reliable MTU Series 4000 engine platform. Designed for continuous power generation in industrial facilities, CHP plants, and distributed energy projects. Key Specifications • Engine: MTU 12V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 1500kW • Frequency: 50 Hz • Speed: 1500 rpm • Engine Configuration: V-12 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Distributed energy systems and microgrids Condition: New Location: Europe Availability: On stock Please contact us for price, detailed technical documentation, and delivery conditions. PM : infobscgroup.eu

Heat gun LEISTER

Key data: 75 KW, 400 V

Combined heat and power plant (CHP) HBG 75 – Electric hail – 75 kW – YOC 2014 For sale is a combined heat and power plant type HBG 75 – E 0836 TE312 from the manufacturer Elektro Hagel, built in 2014. Technical data: Manufacturer: Elektro Hagel Type: HBG 75 – E 0836 TE312 Year of Make: 2014 Operating hours: approx. 65,000 h Engine: Gas gasoline engine, four-stroke Generator: Leroy Somer LSA 44.2 M95 C6S/4 Generator type: air-cooled synchronous generator Voltage: 400 V Electrical power: 75 kW Thermal power: 93 kW Total rated heat output: 196 kW Equipment: Launch system Gas pressure regulator and safety range Switchgear with PLC control Flue gas system with heat exchanger (AWT) Soundproofing Condition & History: Approx. 65,000 operating hours All maintenance was carried out regularly by a specialist company The  ...

Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

230 VAC, 1 PH -10° to + 90°C temperature range 10 to 98 relative humidity Chamber dimensions: 22 1/2 inch W x 18 inches T x 32 1/2 inch H

Auction-ID: A7-45167-8

Including pallet. Auction-ID: A1-45003-190

Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater -Eltra item no.: 1BGL1CE04001 -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: Hasco, high-performance cartridge heater -Item No.: 277202 10 x 100 mm -Power: 400W 220V -Dimensions cartridge: O 10 x 100 mm -Weight: 0.1kg

Solid state relays, switchgear, switching components -Manufacturer: Gavazzi -Type: RAM1A69D100 3 pieces mounted on heat sink -Price: complete -Dimensions: 300/200/H80 mm -Weight: 3.3 kg

Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater -Manufacturer: Stego, switch cabinet heating -Type: CSF 060 -Power: 150 watts -Voltage: 120-240 V -Dimensions: 150/60/H90 mm -Weight: 0.4 kg

Thermal systems, fan heaters, heating elements -Space-saving fan heater: HVL 150 -Power: 150 W -Price: per piece -Number: 4 pieces -Dimensions: 110/105/H60 mm -Weight: 0.5 kg/piece

Thermal system, fan heater -Space-saving fan heater: HVL 031 -Power: 225 W -Price: per piece -Number: 2 pieces -Dimensions: 90/130/H160 mm -Weight: 0.9 kg/piece

Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable from 50 to 100 kW -Length: 560 -Width: 350 mm -Height: 500 mm -Gas type: Propane -Quantity: 1 available Price: per piece -Weight: 16 kg

Heating cartridge -Diameter: 10 mm -Length: 140 mm -Volt: 230 V. -Watt: 230 W -Number: 3 pieces -Price: complete -Weight: 0.15 kg

Heating cartridge -Diameter: 10 mm -Length: 226 mm -Volt: 230 V. -Watt: 230 W -Number: 2 pieces -Price: complete -Weight: 0.15kg

Cleaning container -Large: cleaning container -Interior dimensions: see photos -Performance levels: 5 -Price: per piece -Number: 2 pieces -Dimensions: 595/380/H660 mm -Weight: 38 kg

Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable 50 kW -Connection pressure: 0.35-1.5 bar -Air flow rate: 1000 m³/h -Weight: 20 kg

Underfloor heating clip fixers, -Clipmaster: 17 -in the suitcase -Dimensions: 930/250/H80 mm -Weight: 5.8 kg

Useful power KW: 2,400 Usual yield Kcal/h: 2,165,480 Combustion system: Methane gas Temperature: 90°C Maximum working pressure bar: 5 Burner Baltur "BGN 300"

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: 2314 -Connection: 220 V 210 W -Heating capacity: -Total length: 1500 mm -Price: per piece -Number: 2x available -Weight: 2.2 kg

Heating element, air heater, heater fan, hot air fan -Power: 5.0-6.7 kW -Voltage: 380-440 volts -Number: 1x elements available -Price: per piece -Dimensions heating: 65/65/H160 mm -Weight: 0.4 kg

heating element, air heater, heating fan, hot air blower -Power: 3.0 kW -Length: heating element 120 mm .Diameter: 50 mm -Overall dimensions: 50/50/H160 mm -Quantity: 1 piece available -Weight: 0.26 kg

heating element, air heater, heating fan, hot air blower -Power: 3x 2.5 kW -Diameter: 45 mm -Length of heating element: 180 mm -Total length: 215 mm -Dimensions heater: 45/45/H215 mm -Quantity: 1 piece available -Weight: 0.37 kg

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Power: 1.5kw -Number: 2x elements available -Price per piece -Dimensions heater: 65/65/H230 mm -Weight: 0.53kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

No.: L13457 Y.O.M.: 1990 Pressure working space: 4 bar Pressure double jacket: 4 bar Double-acting mechanical seal Locking pressure station speed-controlled scraper Condition good various spare parts: seals, mechanical seals Dimensions LWH: 1100 x 900 x 1750 mm Weight: approx. 900 kg

Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price

Wilms indoor heater new ovp Manufacturer Wilms Type B125 Diesel Oil-powered heaters with open flame, e.g. for deicing or thawing materials, vehicles, pipelines, etc. As additional heating of stables as well as of operating and storage rooms with sufficient ventilation. Electric connection: 230 V, 50 Hz. Room thermostat installed as standard. Type: B 125 Heating capacity: 40 kW - 34,400 kcal/h Air power:: 920 m3/h Consumption: 3 kg/h Tank: 38 l Weight: 24 kg

electric heating, electric radiator, heating coil, electric tubular heating element -Power: 600 watts, 120 volts -Width: 400 mm -Height: 100 mm -Depth: 250 mm -Number: 11 available -Price: per piece -Weight: 4 kg

Various above-ground, double-walled tanks in sizes 5,000 / 7,000 / 10,000 / 20,000 litres Diameter 1,6000 and 2,000 mm

Electrode furnace, electric 220 V

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...