129,231 used machines on RESALE, but how to find them? Machine Search
-System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: CF 7000 / UCF 646-00-35 Power: 110 kW Year of construction: 2012 Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzun ...
Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature range -70°C to + 180°C Temperature deviation over time ±0.1 to ±0.5 K Temperature deviation ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test room dimensions: Width 580 mm Depth 450 mm Height 750 mm External dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test room volume 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on site: 32 A sluggish Sound level at a distance of 1m (free field measurement) < 69dB (A) lateral feedthrough 50 cm / 125 cm Cabinet is water-cooled Refri ...
Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature deviation over time ± 1 K Temperature deviation spatially ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x lateral implementation 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to ...
Heraeus Vötsch Temperature Test Chamber Here we offer a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Basic unit type VT 7021 Operator terminal color touch panel Microprocessor monitoring and control MINCON/32 independent adjustable temperature limiter tmin / tmax adjustable software temperature selector limiter min./max. serial interface RS 232 Schuko socket potential-free contact for test material shutdown Refrigeration unit air-cooled 1 door lockable, one-hand operation Calibration of 2 temperature values Mobile version 1 bushing, NW 80 mm, right Test room volume 210 liters Temperature range -70°C to +180°C Temperature deviation over time ± 0.2 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Temperature change rate heating 2.5 K/min Temperature change rate cooling 2.5 K/min heat compensation 800W ...
Heraeus Vötsch Climate Test Chamber Here we offer you Heraeus Vötsch climate test chamber. Temperature Climate Test Chamber Air Cooled Standard: Touch panel and independent, adjustable temperature limiter 32 Bit S! MPAC control with touch panel Potential-free contact for test material shutdown Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system Interface TCP/IP 1 pipe feedthrough 50 mm Refrigeration circuit air-cooled Coolant R23 & R404A Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity spatially ±0.5 to ±2.0 K Change speed heating 3.5 K/min Change speed cooling 2.5 K/min Services for climate tests: Humidity range 10 to 98% Test room dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: width 760 mm depth ...
Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Water-cooled Vötsch Temperature Test Chamber VTS 7027-20 Temperature range: -70°C to +180°C Temperature change rate: Temperature deviation in time ± 0.3 to ± 0.8 K Temperature deviation ± 0.5 to ± 2.0 K Change speed Cooling 20 K/min Change speed heating 20 K/min External dimensions: Width 780 x Depth 1895 Height 1900 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 20 kW Rated current 36 A Refrigerant R404A / R23 Climate test: Temperature range +10 to +95 Humidity range 10 to 98 % approx. 270 litres weight: 950 kg Type: VTS 7027-20 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally comp ...
WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102
Internal cylindrical grinding machine with flat grinding device, VOUMARD 404 N2X2/700, See pictures attached
ZERMA GSE 700 plastic granulator machine manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rotor with knives arranged in a ‘V’ shape. The rotor is driven by a slide-rail-mounted electric motor with tension-screw adjustable V-belts. The ZERMA GSE 700 plastic granulator machine can even cope with larger pieces of plastic, such as lumps and film rolls, thanks to the use of a deflecting wedge and block knives to prevent the rotor from blocking. All of the machine’s components are mounted on a base frame, fitted with mounting pads to dampen noise and vibration.
Height 1250 Width 1000 mm Length 1500 mm Capacity 700 l Voltage Electrical: 400V 50Hz 3N Installed Power 2.4 kw Main material Stainlees Steel Time of realisation 2-3 weeks With With mixer
Heavy Belt Conveyor GUF-P 2004 Heavy-duty belt conveyor for applications with particularly high loads and bulky material to be conveyed. -Heavy -Strong -Resilient Conveyed material: bulk material, general cargo loose, carton Transport distance: Straight & incline up to 20° Conveying speed: up to 60 m/min Total load usual: up to 200 kg Deflections: 01, 09 with roller ø 105 mm Belt body profile: mk 2004 Product data: Manufacturer: Maschinenbau Kitz Type: GUF-P 2004 BC 4300/700 Conveyor length: 4300 mm Conveyor width: 700 mm Height: 900 mm Propulsion: SEW Eurodrive Motor SF57 DT80K4 400 V 0.55 kW More items - new and used - can be found in our shop! International shipping costs on request!
Roller piston vacuum pump Manufacturer: Leybold Type: RA 7000 Status: used Performance: without suction pumps: 7000m3/h lifting agent: mineraloil Delivery time: ex stock
Roots vacuum pump Manufacturer: Leybold Type: RA 7000 Status: used Warranty: without Suction capacity: 7000 m ³/h Beriebsmittel: Mineral oil Delivery time: In stock
Used vertical wrapping machine by Ulma model VTC 700. New 2008. Vertical Fulfillment Wrapping Machine (VFFS) that forms a package with three seals. Designed for continuous packaging at high production speeds of up to 140 cycles/min. The VTC 700 machine is specially designed for continuous wrapping of many different types of products. The machine is extremely flexible in terms of changing the moulding size to allow for different portions and has the versatility to adapt to any type of film. Combine these features with the level of electronics specification and you have one of the most technologically advanced machines available on the market. Standard features: - Stainless steel version. - Servo-driven cross seal jaws (2 servo motors). - Servo driven film transport (2 servo motors). - Open front frame design. - Film spool holders with pneumatic wedges. - One-piece and eas ...
70 m pallet rack Stow New & used goods very good condition, see pictures. Height 7.2 m Depth 100 cm, galvanized Capacity 12 tons Beam length 2.7 m blue Carrier with ballast /compartment 3000 kg Negotiation price: € 11.190,-- net from stock Offer consists of: + 26 pcs. frame pre-assembled, depth 100 cm, height 7.2 m +200 pcs. carrier, length 2.7 m, 3000 kg ballast/compartment +400 pcs. Suspension locks +104 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale ...
Loma Model: 7000 metal detector checkweigher Serial: ECB1101424575 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins
Perfect binder line WOHLENBERG GOLF 370 consist of: Gathering machine WOHLENBERG SPRINTER 7000 1994.year 16 automatic station with double and mis control (4 unit x 4 station) hand feed station criss-cross delivery pumps, documentation conected to Binder WOHLENBERG GOLF 6000 1994. year Max size of book 370 x 320 x 50 mm opticontrol for book size on enter proces vibrator for book block milling and rughering station extraction sistem with 2 bags hot melt side unit with 2 disc hot melt spine unit with 2 rolers PUR melt spine unit with 2 rolers and PUR Nordson melter 20 kg PUR station for cleanig cover feeder with duble and mis sensor control 15 clamps 1 x press station for conection of cover and bookblock 2 x press station for forming spine and side of book delivery table pumps, spare parts, dokumentation ...
Type MS 7000 For grinding blades up to 630 mm lenght. Included cooling system in set. Grinding disk diameter 100 mm. Inner diameter 20 mm, 2800 rpm. Motor power 0,55 kW. Easy and efectively working blade holders. Machine weight 65 kg.
TO WHOM IT MAY CONCERN ; WE VE 2 PCS REBUILT COMPLETE BOSCH FUEL INJECTION PUMPS OF MERCEDES OM 424 LA AT OUR STOCK PUMPS ARE READY TOU USE . WE VE ALSO ADDATIONALY BELOW NEW SPARES FOR SAME ENGINE TYPE FULL 2 SETS FUEL PIPES 8 PCS COMPLETE INJECTORS 19 PCS BARREL AND PLUNGERS 1 FUEL PUMP GEAR AND FLANGE 48 PCS RECON COMPLETE INJECTORS HOLDERS 4 PCS PRE FUEL FEED PUMPS 1 PC OIL PUMP 2 PCS NEW WATER PUMPS 5 PCS REBUILT EXH GAZ TURBO CHARGERS K36-424 ETC ETC ETC ... IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .
High pressure cleaner, Cold water high pressure cleaner Manufacturer: Karcher Type: HD 700 Year of construction 1998 maximum pressure: 140 bar 9.5 L / min Drive: electric With hose package All information without guarantee
Milling machine 4-axis (15995740874) DMG Milltap 700 (2015) Spindle 24,000 1/min NC parts apparatus Lehmann EA-510. L Tool magazine 25 places Renishaw Measurement Kit Rinsing gun Milling machine 5-axis (15995747284) DMG Milltap 700 (2015) Spindle 24,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Rinsing gun Renishaw Measurement Kit Milling machine 5-axis (15995765944) DMG Milltap 700 (2018) Spindle 10,000 1/min Swivel rotary tables 5-axis simultaneous operation Clamping pneumatics 1-circuit Tool magazine 25 places 40 bar IKZ Conveyor Renishaw Measurement Kit Automatic front door Automation interface including automation door on the right Milling machine 5-axis (15995734744) + WH3 (770200062R) DMG Milltap 700 (2014) Spindle 10,000 1/min Swivel rotary ...
7000 m² mezzanine, as good as new Used goods, good condition, see pictures Column grid 580 x 520 cm Ground floor: Height lower edge: 490 cm Height top edge: 540 cm Load capacity: 750 kg/m² 1st floor: Height lower edge: 340 cm Height top edge: 380 cm Load capacity: 500 kg/m² 3. Floor ceiling possible Price on request Partial sale and CAD planning possible. Transport and assembly possible. All plans and statics available. Subject to change. As long as stocks last. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Rotary piston blower booster Manufacturer: Leybold Type: RUVAC RA 7001 Status: Rebuilt Including: new paint, engine new bearings, electrical check Warranty: 12 months delivery time: in stock; ready for operation
1 piece flat grinding machine COSMOS E 7040 NC grinding range 700x400x350mm electric magnetic clamping plate 700x400mm single set-up, fixed for straight-straightering with compensation Programmable display 4.7 . . . . -level grinding spindle drive Universal paper strip filter; as good as new, ready for use
Description of the chip press: Powerful metal chip press with chip shredder for long turnings. The area of application is the processing of large quantities of milled and turning chips. Materials: aluminum, steel, cast iron Drip pan as oil tank Geared motor for optimal agitator operation Hydraulic Compression Cylinder Hydraulic press cylinder with two coaxial sections Diameter of briquettes 60 mm Automatic briquette length adjustment with displacement transducers Inductive Proximity Sensors Pre-compaction cylinder in conjunction with special compression hydraulic cylinder that compacts the material in the bushing-bulkhead unit Briquette ejection system, consisting of a compression chamber and a bulkhead with special anti-wear treatment Highly efficient closed-circuit oil cooling system consisting of an air/oil heat exchanger Hydraulic system with B ...
Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm
: 300 mm : 500 m³/h : pa Filter capacity: m² : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Milling Machine MAHO MH 700 C CNC- 5 axis CNC- Phillips 432 X/Y/Z- 700/450/500 mm B axis CNC Universal table 820x480 mm 5th axis- CNC/NC dividing head ISO 40 spindle adapter Quill stroke of spindle 100 mm Universal table: -swiveling of the Horizontal X/Z axis 30 degrees -swiveling of the vertical Y axis 360 degrees Spindle speeds infinitely variable 20-3150 rpm
85,700 litre wine tank/storage tank RSM, round, made of V2A Cat No.: 24-0149 Condition: New Pieces: 5 KK UNI-ACKER Dimensions: Overall height: 12,850 mm Diameter: 3,000 mm Sheath height: 12,000 mm Thickness: Bottom 3 mm Sheath 3-2 mm Lid 3 mm composed of: Flat floor for concrete base 3% inclined incl. ground anchoring ring in accordance with European regulations in the event of earthquakes and storms (parts of the anchor ring must be welded on site by the customer). Nozzle DN100 DIN 11.851 in the lid (for mounting light on the customer's side, light not included) Dome Ø 400 mm in 1.4404 with jointvery stable Solid door Laveggi A4 (edge thickness frame 12 mm) without swivel arm Double-jacketed laser-welded 2xh 1250x9330 à 8.75m2 with parallel connection 2" Connector Thermometer connection NW20 with sleeve Cleaning line NW 50 with connection ...
GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmMax. torque (40% DC)525 NmTorque (100% DC)410 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Y-Axis PartingTechnology cycle to parting off the workpiece by the Y-axis to ac ...
GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts a h ...
Vötsch VT 7030 S2 Thermal Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a familiar environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a wide range of environmental conditions for scientific studies, product testing, and process controls. Data for temperature tests in single-chamber operation Hot Chamber: Thermal shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Thermal shock te ...
Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. approx. 4.700 liters used – in very good condition Measurement and Weight: Total Height 2650 mm Cyl. Height: 2000 mm Diameter: 1750 mm Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with hinged cover 50% with handle with thread connection DN 50 with 3 cran eyes Tank cylinder: with 2 x handle for mounting with thread connection DN 50 with butterfly valve DN 50 Lower bottom: with rest outlet with butterfly valve DN 50 drawn to the front with 3 calotte feet with variable height
Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...
Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder
automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 specifications: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t
Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table
; Gross weight [kg]: 1989; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
We offer a Doka Framax 270 and 135 formwork 485.87m² complete with accessories on request. The formwork is completely cleaned, checked and ready for immediate use. Can be used for fair-faced concrete class 2/3 without any problems. Partly recovered with phenolic resin plates 220- 240g film coating, Finnish birch through and through, BFU 100 glued. New value approx. 352.817,00€ - Special net price: 124.853,00€ Pcs. Description 3 Framax Xlife-Element 2.40x2.70m new panel - Doka rental warehouse 5 Framax Xlife-Element 2.40x2.70m Doka rental warehouse 9 Framax Xlife-Element 1.35x2.70m new panel - Doka Rental Warehouse 32 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 9 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 8 Framax Xlife-Uni-Element 0.90x2.70m Doka rental warehouse 8 Framax Xlife-Element 0.90x2.70m Doka rental warehouse 8 Framax Xlife- ...
; Gross weight [kg]: 6600; Engine: Cummins KTAA19-G6A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 975
Man Roland 705 Lacquer Year of Make: 2009 Property Value 90 mil Supply voltage (U) 3-phase, 400 V Frequency (f): 50 Hz Max. motor current (IFLA): 168 A Pre-fuse (according to IEC 60269): 200 A Fuse operating class: gL/gG Short-circuit power: 42 kA, balanced, 400 V max. Control Type: Industrial Control Panel, UL/cUL Certified Control cabinet type: Type 1, Use type 12 Connectors Degree of protection (IP): IP54 (dust-proof, splash-proof) Wiring diagram: 8035963F493 Location marking: Ax Mechanical engineering: High-quality German construction IP54: Dust-proof and splash-proof – industry standard. 200A pre-fuse: High power requirement, large printing machine. 42kA short-circuit power: Control cabinet is designed for high short-circuit currents, very robust. Specifications of the Manroland ROLAND 700 DirectDrive Format & Capacity Maximum sheet size: 740 ...
Key data: 700 mm, 420 mm, 380 mm
Specifications: Manufacturer: DMG MORI Type: Milltap 700 Year of Make: 2016 Control: Siemens 840D SL Travel: X 700 mm Y 420 mm Z 380 mm Switch-on hours: 32,722 h Program runtime: 24,284 h Spindle running time: 12,539 h Spindle Speed: 10,000 rpm Tool holder: DIN30 NC swivel rotary table Table load: max. 100 kg Swivel range A: -100/+120° Rotation range C: 360° Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool Changer Conveyor IKZ Internal tool cooling with high-pressure system Preparation for automation
suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm
2.70 Meter AR Racking Pallet Rack Base Field AR Racking Pallet Rack Basic Field with a total length of 2700 mm. The field has three levels (incl. ground parking space) with four trusses (2700 mm). In the field, 3 Euro pallets can be stored next to each other and 3 pallets (incl. floor storage space) on top of each other The base panel has a push-through protection against unintentional pushing of pallets in the rack. The field offers space for 9 Euro pallets Manufacturer: AR Racking Type: ARPA-S Total length: approx. 2700 mm Shelf height: 3000 mm Shelf depth: 1100 mm Clear field width: 2700 mm Pitch: 50 mm Number of storage levels: 3 (incl. floor storage space) Number of fields: 1 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 9 Year of manufacture: 2023 Stand The frames consist of two Omega profiles with their corresponding connectors, po ...
maximum number of results exceeded
please refine your search
