heat exchanger 70 used for sale

High-temperature heat pump for industrial processes using water as the heat transfer fluid. The system consists of the following main components: Evaporator: Heat exchanger for evaporating R245fa refrigerant. The heat required for this is absorbed by water. Compressor: A screw compressor that is continuously adjustable between 50% and 100% of maximum capacity. Condenser: A heat exchanger for transferring heat from the compressed refrigerant to heating water. The refrigerant is liquefied again during this process. The liquid refrigerant is expanded via an expansion valve and returned to the evaporator., Additional title: high-temperature water-to-water industrial heat pump, Heating capacity: 408 kW, Cooling capacity: 319 kW, Coefficient of Performance: 4,6, Power: 89 kW, Current: 159 A, Voltage: 400 V, Frequency: 50 Hz, Length: 4380 mm, Width: 1390 mm, Height: 1800 mm, Weight: 2600 kg, Fe ...

Key data: 772 KW, 400 V

MTU CHP 8V4000 L63 incl. exhaust gas heat exchanger, table cooler and control cabinets (see pictures) Type: AE8V4000L63 Weight: 9000 kg Heating water pressure max.: 16 bar Electrical power: 772 kW Thermal power: 800 kW Heating water temperature inlet/outlet: 60/90°C Rated Power Factor: 0.8 cos φ Nominal voltage: 400 V Nominal frequency: 50 Hz Operating hours: 64380 h (as of July 30, 2026) Starts: 1773 (as of July 30, 2026) NOx sensor with monitoring Condition: The machine is currently in operation and in very good condition according to its age. Year of manufacture/operating hours: The CHP plant was built in 2008. In 2016, the engine was replaced and has since run for about 64,400 operating hours. Disassembly: We will drain the water and oil, unlock the machine and disconnect it from the pipes. The dismantling and application is carried out by the buyer. Maintena ...

BEHROTEST DCO CSB 24/E Heating Block / Mineralizer + BEHR LABOR-TECHNIK TRS 300 Control Unit For 24 samples For RG 2 reaction vessels Automatic precision dry bath thermostat for 24 RG reaction samples, 20°C to 300°C BEHR TRS300 Control Unit for Standardized COD Mineralizer In excellent condition

Heating cabinet Manufacturer: Memmert U 10 Type: U 10 Features / technical data: Usable dimensions: approx. (BTH=38 x 24 x 26 cm) External dimensions: approx. (BTH=51 x 40 x 55 cm) Usable capacity approx. 26 litres 1400 watts Regulation 5°C μg to 220°C Aluminum interior with two shelves

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49225-136

Technical details Manufacturer: DEM Type: Semi-automatic shrink wrapping machine Configuration: - L-sealing frame - Film roll support system - Product support table - Sealing hood assembly - Teflon-covered sealing area - Pneumatic/gas-assisted lifting mechanism - Castor-mounted frame Application: - Garment packaging - Textile product packaging - Industrial spare parts packaging - Retail multipack packaging - Polyolefin shrink film applications - PVC shrink film applications Process: - Manual product loading - Automatic sealing cycle - Shrink-film packaging Construction: - Industrial steel frame - Integrated film handling system - Semi-automatic packaging workstation Dimensions: - Length: Approx. 2200 mm - Width: Approx. 1200 mm - Height: Approx. 1500 mm Weight: Approx. 450 kg Condition: Used Observed condition: - Sealing frame intact - Film roll support ...

Combined heat and power plant (CHP) for natural gas operation Manufacturer: Viessmann Year of Make: 2017 Operating hours: 22,334 h Plant starts: 2580 Electrical power: 8.5 kW Thermal power: 20.1 kW Energy input H: 30.1 kW Electrical self-consumption max.: 0.15 kW Flow temperature min./max.: 50/85 °C Return temperature min./max.: 30/65 °C Permissible operating pressure: 1 MPa (10 bar) Condition and availability: The CHP unit is in a well-maintained condition and is immediately available. This system is particularly suitable for economical and self-sufficient heat and power supply in small to medium-sized applications.

Composed of: - Model Compress 7000i AW 13s - B - Model GC7000i W 24 24 kW in heating - Flexible outdoor unit connection kit to piping - HW50 - Hydraulic compensator with threaded connections 1¬Ω'Äù - Vertical adapter 80/125 to 60/100 mm - Split adapter C53x 80/125 at 80-80 mm - VW1 - 3-way diverter valve (mod LK525) for external DHW tank load - Puffer PS 100 model with 103 liter capacity - 2FTV/ST/BWPS300 kit with 2 FT226-2 vertical manifolds - FKA 26 mounting kit - Twin-Tube 15-10 Cu Load measurements: Pallet 1: 950x1200x2000 mm Pallet 2: 1200x800x2350mm Pallet 3: 1200x1000x1500 mm Pallet 3: 600x600x1800 mm Auction-ID: A7-49226-153

Detailed manual attached Loading dimensions: 580x580x1280 mm Auction-ID: A7-49226-371

Composed of: - Model CSH7000iAW 7 OR - BPU300 model with 202 l ACS and 78 l inertial capacity - CR10 - Modulating thermostat - VW1 - 3-way diverter valve (mod LK525) for external DHW tank load - TWM20 DN20 thermostatic mixer for drinking water - Vertical adapter 80/125 to 60/100 mm - Vertical adapter 80/125 to 60/100 mm - Flexible outdoor unit connection kit to piping - 3/4\" magnetic filter required for CSH7000iAW - SF3 - NTC temperature probe for DHW boilers - Model GC7000i W 14 with 14 kW in heating Load measurements: Pallet 1: 1200x900x1850 mm Pallet 2: 1200x800x1300 mm Pallet 3: 700x700x2000 mm Auction-ID: A7-49226-154

Never used / sold in original carton Auction-ID: A1-49235-425

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49226-137

Never used / sold in original carton Auction-ID: A1-49235-19

Never used / sold in original carton Auction-ID: A1-49235-7

Single piece loading dimensions: 800 x 1850 x 100 mm Auction-ID: A7-49226-405

Never used / sold in original carton Auction-ID: A1-49235-617

Single piece loading dimensions: 800 x 1850 x 100 mm Auction-ID: A7-49226-121

Never used / sold in original carton Auction-ID: A1-49235-6

Never used/sold in original carton. With foam sleeves Auction-ID: A1-49235-1353

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49225-139

Never used / sold in original carton Auction-ID: A1-49235-46

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49226-138

Never used / sold in original carton Auction-ID: A1-49235-13

Technology: One-piece (all hydraulic components are integrated into the outdoor unit) Rated power: 13.5 kW Power supply: 220-240 V, single-phase, 50 Hz Auction-ID: A1-49235-1033

Technology: One-piece (all hydraulic components are integrated into the outdoor unit) Rated power: 13.5 kW Power supply: 220-240 V, single-phase, 50 Hz Auction-ID: A1-49235-1032

Composed of: - Model CSH7000iAW 7 OR - BPU300 model with 202 l ACS and 78 l inertial capacity - CR10 - Modulating thermostat - VW1 - 3-way diverter valve (mod LK525) for external DHW tank load - TWM20 DN20 thermostatic mixer for drinking water - Vertical adapter 80/125 to 60/100 mm - Vertical adapter 80/125 to 60/100 mm - Flexible outdoor unit connection kit to piping - 3/4\" magnetic filter required for CSH7000iAW - SF3 - NTC temperature probe for DHW boilers - Model GC7000i W 14 with 14 kW in heating Load measurements: Pallet 1: 1200x900x1850 mm Pallet 2: 1200x800x1300 mm Pallet 3: 700x700x2000 mm Auction-ID: A7-49226-155

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49226-139

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49225-138

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49225-144

Technology: One-piece (all hydraulic components are integrated into the outdoor unit) Rated power: 13.5 kW Power supply: 220-240 V, single-phase, 50 Hz Auction-ID: A1-49235-1034

Never used / sold in original carton Auction-ID: A1-49235-47

Never used / sold in original carton Auction-ID: A1-49235-49

Never used / sold in original carton Auction-ID: A1-49235-25

Manual detailed in description Single workpiece loading dimensions: 600 x 600 x 1700 mm Auction-ID: A7-49226-127

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49226-1

Never used / sold in original carton Auction-ID: A1-49235-39

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49226-136

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49225-137

Composed of: - heat pump ( OMNIA UE 3.2.3)  - hybrid boiler (OMNIA S HYBRID 28C 3.2) - Coaxial hoses + bends + hybrid hydraulic kit Loading dimensions : 1200x900x1300 mm Auction-ID: A7-49225-1

Never used / sold in original carton Auction-ID: A1-49235-16

Never used / sold in original carton Auction-ID: A1-49235-26

Never used / sold in original carton Auction-ID: A1-49235-34

Never used / sold in original carton Auction-ID: A1-49235-15

Technology: One-piece (all hydraulic components are integrated into the outdoor unit) Rated power: 13.5 kW Power supply: 220-240 V, single-phase, 50 Hz Auction-ID: A1-49235-1035

Total height 136cm (with legs) Tub height 84cm Total width 90cm Tub width 80cm Length 203cm Capacity 1250l Top inlets: 2 Side inlets: 4 Bottom inlets: 4 Auction-ID: A7-49327-36

INDUSTRIAL HEATER DIESEL COMBUSTION Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A1-49242-1016

Stationary hot air generator Dantherm, type KA 60. Robust design for use in workshops, warehouses and industrial buildings. Equipped with blower burner, air exhaust fins, flue gas connection as well as gas or heating oil fittings (depending on the existing burner design). Used condition with age-related wear and traces of soiling. Sale takes place unchecked. Auction-ID: A1-49382-84

Heating element for Hotwind S film shrinker 380V/440 V, 4 pcs 4000 W 1 pc 5400 W Stock: 14 pieces

200L PHOTOVOLTAIC SOLAR WATER HEATER (+ SYSTOVI SMART AIR) Each balloon is supplied with the sustovi smart air Brand new, never used product Auction-ID: A1-49412-390

The TERMAL FLUENDO 14 liter gas water heater is a device designed to provide an instantaneous water flow of 14 liters per minute, thus providing convenient and efficient use. Technical specifications: Nominal flow rate: 14 l/min; Gas Type: BUTANE / PROPANE; Regulation: mechanical; Ref: 3632028; New appliances that have never been used; Auction-ID: A1-49412-428