heat exchanger 70 used for sale

General SKU309N517 LocationBarneveld MakeFalk Gmbh &: Co KG Bendorf No.3301 Pressure Working pressure shell2.5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Surface81.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface81,3 m2 Tube capacity525 Ltr Number of tubes:126 Tube diameter25mm Tube length3900mm Max. temperature100 gr.C. Shell capacity1140 Ltr Shell connections(2x( dia.150mm Cover connections(2x) dia.100mm MaterialMild steel General Year of construction2007 Floorspace5,5x0,9 M Weight2170 KG Extra SpecificationsThe material of the shell and tubes are 1.0345 (P235GH)Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & ...

General SKU071F416 LocationBarneveld MakeCarl Canzler GmbH &: Co. Düren TypeSpiral heat exchanger No.5967 Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface4,2 m² Tube capacity31/21 Ltr (Channel A/B) Max. temperature160°C. Max. temperature160°C. MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) General Year of construction1986 Floorspace0,8x0,6 m Total height0,8 m Weight300 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed ...

General SKU050C531 MakeBarriquand Echangeurs Roanne, France TypePlatular IXA SP 2x5+6 / 3x5x160x1500 No.23297 D7 Year of construction1991 LocationBarneveld Pressure Working pressure shell8 Bar Working pressure tubes8 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5.3 m2 Specified Features - Plate heat exchanger Heat exchangercheck Horizontalcheck Heating surface5,3 m² Tube capacity15,8 l. Max. temperature200°C Shell capacity35 l. Max. temperature200°C Plate heatexchangers MaterialStainless steel 1.4435 (316L) General Floorspace2,2x0,7 m Total height0,6 m Weight440 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesOrganicsPap ...

General SKU345S652 LocationBarneveld MakeG.A.B. Neumann GmbH (DE) TypeH-B-6,4 No.10927-8692 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface4.8 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface4,8 m2 Tube capacity17 Ltr Max. temperature-10/165 degr.C. Shell capacity18 Ltr Max. temperature-10/60 degr.C. Shell connectionsDN100, DN80, DN40 Cover connections(2x) DN50 MaterialGraphite General Year of construction1991 Floorspace0,6x0,6 m Total height1,35 m Weight460 KGOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillers ...

General SKU050C389 Makeunknown, manufacturer tag is missing LocationBarneveld Material Shell materialStainless steel 1.4401 (316) Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface1.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface± 1,5 m2 Number of tubes:25 Tube diameter24mm Tube length± 900mm General Floorspace2,2x0,7 MOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedShell and tube heat exchangersOther feedConfectionerySolid pharmaceuticsBeveragesDyes &  ...

General SKUR0854 MakeZürcher AG (CH) Type35 m2 No.1886 Year of construction2002 Mounted on legscheck Pressure Working pressure shell6 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface35 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface35 m2 Tube capacity164 ltr U-typecheck Number of tubes:122 Tube diameter16mm Tube lengthca 5400mm Wall thickness tubes1,0mm Max. temperature-30/200 degr.C Shell capacity206 ltr Shell diameter406mm Shell length3312mm Wall thickness shell4mm Max. temperature-30/200 degr. C Shell connectionsDN65 (2x), DN15 (1x) Cover connectionsDN100 (1x), dia. 100mm (1x) MaterialStainless steel 1.4404 General LocationBarneveld Floorspace3,7x0,6 M Total height1,3 M Weight750 KGOils & fatConsumer wastePaints & coating ...

General SKUR0366 MakeBuss SMS LocationBarneveld TypeKondensator Pressure Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface41.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface41,5 m² Tube capacity175 l. U-typecheck Number of tubes:40 Tube diameter20x1,5mm Tube length16500mm Wall thickness tubes1,5 Max. temperature100°C Shell capacity700 l. Shell diameterdia. 500mm Shell length4660mm Max. temperature200°C Shell connectionsdia. 400mm (2x) Cover connectionsdia. 100mm (2x) MaterialStainless steel 1.4541 (321) General No.22.11.6351/4 Year of construction1994 Mounted on legscheck Floorspace5,2x0,7 m Total height1,1 m Weight1000 kgOils & fatConsumer wastePaints & coatingsPowdered  ...

General SKU309N516 MakeFalk Apparate- und Rohrleitungsbau gmbh&:co KG No.3305 Year of construction2007 Mounted on legscheck Material Shell materialMild steel Tube materialStainless steel 1.4462 (318LN) Pressure Working pressure shell4 Bar Working pressure tubes1 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface49 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodytuv Heating surface49 m2 Tube capacity262 ltr Number of tubes:76 Tube diameter25mm Tube length3900mm Wall thickness tubes2,0mm Max. temperature165 gr.C. Shell capacity503 ltr Shell diameter508mm Shell length4070mm Wall thickness shell6,3mm Max. temperature165 gr.C. Shell connectionsDN65, DN40 Cover connections(2x) DN100 Capacity3,9 m3 General LocationBarneveld Floorspace5,0x0,8 M Total height1,4 M Weight1 ...

General SKU289N419 MakeFunke Wärmetauscher Apparatebau Gmbh Gronau (DE) LocationBarneveld CEcheck TypeC-300 1508-6-4- Weg Material Shell materialStainless steel 1.4404 (316L) Pressure Working pressure shell20 Bar Working pressure tubes25 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface32.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface32,5 m² Tube capacity106 l. U-typecheck Number of tubes:234 Tube diameter8 mm Tube length(2x) 2750 mm Max. temperature-10/+240°C Shell capacity260 l. Shell diameter400 mm Shell length3400 mm Max. temperature-10/+240°C Shell connectionsdia.200mm, dia.100mm Cover connections(2x) dia.80mm MaterialStainless steel 1.4404 (316L) General No.0620741 Year of construction2009 Floorspace3,4 x 0,5 m Total height0,7 m Weight700 kgO ...

General SKU280P436 MakeCL -THW No.2405 Year of construction1984 Mounted on legscheck Pressure Working pressure shell16.6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface11 m² Tube capacity145 l. U-typecheck Number of tubes:50 Tube diameter16 mm Tube length(2x) 1920 mm Max. temperature-35°C Shell capacity314 l. Shell diameter± 510 mm Shell length1980 mm Wall thickness shell6 mm Max. temperature-35°C Shell connections(2x)dia.70mm, dia.80mm, (2x)dia..60mm, Cover connections(2x)dia.80mm MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace2,5 x 0,8 m Total height1,6 m Weight800 kg Extra SpecificationsMin.Temp -35°COils & fatConsumer wastePaints & coatingsP ...

General SKU309N518 MakeEbner Anlagen und Aparate Germany No.062404700 Year of construction2007 Mounted on legscheck Material Shell materialStainless steel 1.4462 (318LN) Cover materialStainless steel 1.4462 (318LN) Tube materialStainless steel 1.4462 (318LN) Pressure Vacuum possiblecheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface120 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface120 m2 Tube capacity820 l Number of tubes:334 Tube diameter25 mm Tube length5000 m Wall thickness tubes1,0 mm Max. temperature100°C Shell capacity1600 l Shell diameter750 mm Shell length5000 mm Wall thickness shell4,0 mm Max. temperature120°C Shell connectionsDN200, ...

General SKU330N520 LocationBarneveld MakeGesellschaft fuer Oeltechnik mbH Waghäusel TypeE-302B No.106/1545/86 Material Shell materialStainless steel 1.4541 (321) Pressure Working pressure shell13 Bar Working pressure tubes13 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11.1 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface11,1 m² Tube capacity58 l. U-typecheck Number of tubes:31 Tube diameter16 mm Tube length+/- (2x) 3000 mm Max. temperature200°C Shell capacity100 l. Shell diameter400 mm Shell length3800 mm Max. temperature75°C. Shell connections(2x) dia.50 mm, (2x) dia.25 mm Cover connections(2x) dia.100 mm MaterialStainless steel 1.4541 (321) General Year of construction1986 Floorspace3,7 x 0,7 m Total height0,7 m Weight450 kgOils & fatConsumer was ...

General SKUR0830 MakeJaeggi Bern (CH) LocationBarneveld Type35 m² Pressure Working pressure shell6 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface35 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface35 m² Tube capacity164 l. U-typecheck Number of tubes:120 Tube diameter16 mm Tube length6000 mm Wall thickness tubes1 mm Max. temperature200°C Shell capacity206 l Shell diameter406 mm Shell length3000 mm Wall thickness shell4 mm Max. temperature200°C Shell connectionsdia. 65 mm (2x) dia 15 mm (1x) Cover connectionsdia. 100 mm (2x) MaterialStainless steel 1.4435 (316L) General No.1894 Year of construction1990 Floorspace3.7 x 0.7 m Total height1.3 m Weight750 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicine ...

General SKU226Y681 MakeAPV TypeT 4 No.58033 Year of construction2002 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface0.5 m2 Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface0,5 m² CapacitySide 1: 0,7 l.: Side 2: 0,8 l. Plate sizes± 42 x 450 mm Connections4x 24 mm Max. temperature0 — 155 °C Capacity29 kW MaterialStainless steel 1.4306 (304L) General Floorspace0,2 x 0,68 m Total height0,64 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeverag ...

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU296Y560 MakeLe Carbone-Lorraine Serial17461 Pressure Working pressure shell6 Bar Working pressure tubes8 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface80 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface± 80 m² Tube capacity340 l. Number of tubes:± 220 Tube diameter± 16 mm Tube length± 7150 mm Max. temperature60 °C Shell diameter670 mm Shell length7742 mm Max. temperature60 °C Shell connectionsø 200 mm Cover connectionsDN 200 MaterialGraphite, Mild steel General TypePOLYBLOC EXCHANGER NCH 61OG Year of construction1996 LocationBarneveld Floorspace7,75 x 1,05 m Total height1,5 m Weight8000 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed addi ...

General SKU378X940 MakeAlfa Laval TypeAQ4L-FM No.30125-29313 Year of construction2021 LocationBarneveld Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface154.5 m2 Size length2040 mm Sizes width480 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface154,5 m² Capacity140 Ltr. Number of platens311 Plate sizes1500x370 mm ConnectionsDN100 Max. temperature100 °C Capacity2600 kW MaterialStainless steel 1.4301 (304) General Floorspace2,1x0,5 m Total height1,9 m Weight1150 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOt ...

General SKU212T543 MakeKuehni No.227480 Year of construction1990 LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface6.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface6.3 m² Tube capacity17,5 Ltr. Number of tubes:1 Tube diameter30 mm Tube length± 13,1 m Wall thickness tubes2 mm Shell capacity41 Ltr. Shell diameter190 mm Shell length2490 mm Wall thickness shell2,6 mm Max. temperature- 200 °C Shell connectionsDN 25, DN 15 Cover connectionsDN 80, DN 40 MaterialStainless steel 1.4571 (316Ti) General Floorspace2,6x0,55 m Total height0,35 m Weight160 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGe ...

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping costs on request!

Electric flange radiator 350 kW | Industrial Heaters | 400 V | Year of construction 2016 High-performance electric heater for industrial and energy plants For sale is a high-quality electric flange radiator from heat systems Elektrowärmetechnik. The device originates from an industrial application and is ideal for heating water, heating circuits, buffer storage tanks or process media in industrial and energy plants. Technical data Manufacturer: heat systems Elektrowärmetechnik Design: Electric flange radiator Heating capacity: 350 kW Voltage: 400 V AC, 3-phase Current consumption: 505.2 A Permissible operating pressure (hp): 10 bar Permissible temperature (TS): 160 °C Year of manufacture: 08/2016 CE marking available Condition Used Dismantled from running industrial plant Robust industrial design Nameplate fully available Viewing possible by appointment Typic ...

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for modernization were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating eleme ...

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

FOR SALE 3 SET ALFA LAVAL HEATPAC EHM 40kW TO WHOM IT MAY CONCERN; WE VE 3 PCS HEATER OF ALFA LAVAL HEATPAC EHM 40Kw AT OUR STOCK. NO. 0903-12987 MANUFACTURE YEAR 2005 DESIGN VOLTAGE 440V DESIGN TEMP. 160 C. DESIGN PRESSURE 1.5 MPa TEST PRESSURE 2.25 MPa MADE IN SWEEDEN WE VE ADDATIOANALY 2 SETS ALFA LAVAL HEATPAC EHM 72kW AT OUR STOCK IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services Info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

IBC stainless steel container transport container electrically heated 1,000 ltr. Content: 1.000 Ltr. Working pressure: max. vapour pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded-on construction for use by forklift or pallet truck, Insulating sheath with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Outlet with butterfly valve DN 80 reduced to DN 50, lid DN 400, 1 x safety valve, 1 x Kamlock coupling 1", Total weight 381 kg final use: Food Height: approx. 1,670 mm Width/length: approx. 1,200 mm/1,100 mm

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Stock number: 3290 INDUCTIONS HEATER Manufacturer: FAG, type: HEATER PSI 24-400 Machine no.: 10167, year of construction: 2011 Specifications: Automatic residual magnetism Max. 28 kVA

Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

This plant is currently intact and fully connected. The footprint is rectangular and measures approximately 9x5 metres (not including the steam plant, which is in a separate building, adjacent to the brewery). All brewery pipework is stainless steel with clamp-type connectors. The Vessels are all 1,250 litres (except for the glycol tank). - Hot Liquor Tun with level sight. - Mash Tun with wedge-wire filter and powered rakes; inlets for sparge; CIP and Vorlauf. - Combined Copper / Whirlpool with 2 x outlets; exhaust condenser; CIP ball. - Glycol Tank; 2,500 Litres. - 5 x Cylindro-conical, insulated fermenters with CIP, pressure gauge, sample outlet, spunding valve, racking and base outlets. - Side and top-entry access door. - Bright Beer Tank. Spec. as fermenters, but without the conical base. - 2 x Glycol Chillers. - Two Stage Heat Exchanger (water/glycol) with clamp-typ ...

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

Mol D'art Heating cabinet Model: MD60 Serial: 6 Heating cabinet, variable temp control, three shelves, internal dimensions 1450mm x 600mm x 900mm, 1Ph

Key data: 1 C, 330 mm, 890 mm

Chamber furnace KKQ RX3-20-12 up to 1,200°C Rivet Heating Furnace Furnace combustion chamber opening: 330 mm x 300 mm. Combustion chamber depth of the steel box: 800 mm. The dimensions refer to the removable steel box. The actual combustion chamber is 580 mm wide, 440 mm high and 890 mm deep. Dimensions of the chamber furnace including attachments: Width 153 cm x depth 165 cm x height 155 cm. Weight: 1,130 kg. No shipping, only pickup. Equipment & Features: Very large and deep combustion chamber of 227 liters for workpieces and batches. Robust industrial design. Removable steel box (muffle insert/glow hood). Ideal for metalworking, heat treatment and forging Areas of application: Workshop, ceramics, metal, materials testing, metalworking, materials engineering & metallurgy, burning & sintering, hot riveting, heating of steel rivets, forging preheating, forging. Used  ...

Palamine 80ton Upstroke Press (hot press) Platen size: 1525x1150 Daylight gap between top and bottom platen 185cm Max. temperature on platens 600 degrees Type of platen heating Electric 240V Overall footprint size 2160cm x 1525cm

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - .ucymachines/ Contact us at - sales@ucymachines

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - .ucymachines/

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

The 15 kW heating element in Tetra Pak systems is commonly used for heating liquids in processes such as pasteurization and sterilization. Here are some key details regarding this component:, Key Features of the 15 kW Heating Element:, - Power Rating: With a rating of 15 kW, this heating element is capable of providing significant thermal energy, making it suitable for processing large volumes of liquid quickly and efficiently., - Application: Primarily used in food and beverage processing, including pasteurizers, UHT (Ultra-High Temperature) systems, and other equipment where precise temperature control is crucial., - Material: Typically constructed from materials that are resistant to corrosion and can withstand high temperatures, ensuring durability and longevity in harsh processing conditions., - Heating Method: The heating element may employ methods such as conduction or convection  ...

Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU345S1128 MakeBarriquand LocationBarneveld TypeIJS 1x24/1x25x350x2250 37,8 m² Pressure Vacuum possiblecheck Main Features MaterialStainless steel Surface37.8 m2 Size length1970 mm Sizes width261 mm Specified Features - Plate heat exchanger Plate heat exchangers:welded: Heating surface37,8 m² CapacityCircuit A: 54,5 Ltr., Circuit B: 60,3 Ltr. ConnectionsDN50, DN100 (2x), DN200 (2x) Max. temperature-30/200 °C MaterialStainless steel 1.4571 (316Ti) With jacketcheck General No.24059E1 Year of construction1994 Floorspace3x1,05 m Total height1 m Weight1030 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugar ...

General SKU366W1254 MakeVicarb Deutschland GmbH LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface2 m² Tube capacity11 l. Max. temperature160°C Shell capacity10 l. Shell connectionscheck Cover connectionscheck MaterialGraphite General No.1502 Year of construction1989 Floorspace0,60x0,35 m Total height1,80 m Weight355 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyShell and tube heat exchangersOther feedConfectionerySolid  ...

General SKU366W1246 LocationBarneveld MakeVicarb Deutschland GmbH Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface5.8 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface5.8 m² Tube capacity26 l. Max. temperature160°C Shell capacity22 l. Shell connectionscheck Cover connectionscheck MaterialGraphite General No.1508 Year of construction1989 Floorspace0,60x0,60 m Total height2,15 m Weight635 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyShell and tube heat exchangersOther feedConfectionerySo ...

General SKU366W1247 LocationBarneveld MakeVicarb Deutschland GmbH Pressure Working pressure shell5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface5.8 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface5.8 m2 Tube capacity11 l. Max. temperature160°C Shell capacity10 l. Max. temperature160°C Shell connectionscheck MaterialGraphite General No.1501 Year of construction1989 Weight355 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyShell and tube heat exchangersOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigme ...

General SKU366W1277 MakeVicarb Deutschland GmbH LocationBarneveld Pressure Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface3.7 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface3.7 m² Tube capacity19 l. Max. temperature160°C Shell capacity11 l. Max. temperature160°C Shell connectionscheck Cover connectionscheck MaterialGraphite General No.1505 Year of construction1989 Floorspace0,60x0,55 m Total height1,40 m Weight410 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyShell and tube heat exchangersOther feedConfectionery ...

General SKU366W1276 MakeVicarb Deutschland GmbH No.1512 Year of construction1989 LocationBarneveld Pressure Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface16.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16.2 m² Tube capacity85 l. Max. temperature160°C Shell capacity56 l. Max. temperature160°C Shell connectionscheck Cover connectionscheck MaterialGraphite General Floorspace0,70x0,80 m Total height2,40 m Weight1720 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyShell and tube heat exchangersOther feedConfection ...

General SKU345S1092 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface7.8 m2 Size length2020 mm Sizes width290 mm Specified Features - Plate heat exchanger Plate heat exchangers:welded: Heating surface7,8 m² CapacityRoom A: 29 Ltr., Room B: 234 Ltr. ConnectionsDN50, DN80 (2x), DN200 (2x) Max. temperature-30/200 °C MaterialStainless steel 1.4571 (316Ti) With jacketcheck General MakeBarriquand TypeDIJS 1x6/1x7x290x2250 Floorspace3x1,5 m Total height0,7 mOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfecti ...

General SKU366W1269 MakeVicarb Deutschland GmbH LocationBarneveld Pressure Working pressure shell5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface3.7 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface3.7 m² Tube capacity19 l. Max. temperature160°C Shell capacity11 l. Max. temperature160°C Shell connectionscheck Cover connectionscheck MaterialGraphite General No.1504 Year of construction1989 Floorspace0,70x0,70 m Total height1,50 m Weight410 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyShell and tube heat exchangersOther feedConfectionery ...