heat exchanger 70 used for sale

Carton size: length 150mm- ; Width 150-550 mm; height 120-650 mm; with roller feed and outlet Auction-ID: A1-45447-13

Unused, fitting Ifor Williams 5 hole pitch 155mm Auction-ID: A1-45424-103

Unused, fitting Ifor Williams 5 hole pitch 155mm Auction-ID: A1-45424-102

One-day permit, 0 km 2-cylinder in-line engine Euro 5 ABS Ride-by-Wire Slipper clutch Cruise control Brembo Brakes KYB Landing Gear LED lighting Throttling to 35 kW (A2) possible Auction-ID: 04A-NHK-3

FESTO Pneumatic Cylinder 163366 - DNC-50-700-PPV-A-60-K8 , Made in Germany Auction-ID: A7-45483-39

For sale I offer a hydraulic cylinder from Tecpos. The cylinder was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos TSLC-3013 Operating pressure: max. 700 bar Stroke: 13 mm 30 ton Flat cylinder -Single-acting, with spring retraction Shipping available for an extra charge. The hydraulic cylinder is workshop tested and sold immediately ready for use with a new UVV test and can be tested on site. Other accessories available on request. # Short Stroke Heavy Duty Cylinder # High Pressure Hydraulics # Compact Cylinder # Light Metal Cylinder # High Pressure Cylinder # Universal Cylinder # Hydraulic Cylinder # Directional Cylinder # Hydraulic Punch # Hydraulic Pressure Cylinder # Lifting Cylinder # Pressure Punch # Hydraulic Short Stroke Cylinder # Hydraulic Flat Cylinder

For sale I offer a hydraulic hand pump from Tecpos. The hand pump was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos ESP-08 Operating pressure: max. 700 bar Oil Supply: 800cc Shipping available for an extra charge. The hydraulic hand pump is workshop tested and sold ready for immediate use with a new UVV test and can be tested on site. Other accessories available on request. # Hand Hydraulic Pump # Hand Pump # Hydraulic Cylinder # Hydraulic Hand Pump # High Pressure Pump # High Pressure Hand Pump # Hydraulic Hand Pump # Hydraulic Pump

Scope of delivery: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m Auction-ID: A1-45681-736

Concerns 1 Vredestein tyre on 10 hole rim Auction-ID: A1-40134-298

Sweeper incl. charger Working width 1150 mm Working Area: 5700 m²/hr Total power requirement 3.0 kW Machine weight approx. 0.5 t Space requirement approx. 1.6 x 1.2 x 1.6 m Auction-ID: A7-45761-723

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-60

Volume flow 1800m³/h Motor 3000rpm, 1.1 KW Suction Tube 125mm See pictures Condition: unchecked (6) Auction-ID: A7-45761-781

In stock on pallet Auction-ID: A1-45790-523

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3660

REMA Battery Connector 400V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3667

REMA Battery Connector 400V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3671

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45450-3541

new and unused charger in orig. for batteries with 500-700Ah possible without 16A and Rema plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-8010

Steico Joist I-beam - 700x24x4.5 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 3.3kg/m. Auction-ID: A1-45026-2101

Steico Joist I-beam - 700x30x9 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 5.7kg/m. Auction-ID: A1-45026-2109

Steico Joist I-beam - 700x22x9 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 5.0kg/m. Auction-ID: A1-45026-2105

Steico Joist I-beam - 700x24x4.5 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 3.3kg/m. Auction-ID: A1-45026-2102

Steico Joist I-beam - 700x36x9 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 6.2kg/m. Auction-ID: A1-45026-2106

Equipped with ... cyl. Diesel engine; double-wheel mount; front linkage; front PTO; 1 double-acting hydraulic valves; Auction-ID: A1-40135-62

Steico Joist I-beam - 700x30x9 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 5.7kg/m. Auction-ID: A1-45026-2108

Steico Joist I-beam - 700x24x6 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 3.9kg/m. Auction-ID: A1-45026-2112

Steico Joist I-beam - 700x24x6 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 3.9kg/m. Auction-ID: A1-45026-2111

Small zf pitch 8 holes coming John deere tractor Auction-ID: A1-40135-311

Steico Joist I-beam - 700x24x4.5 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 3.3kg/m. Auction-ID: A1-45026-2103

Steico Joist I-beam - 700x36x9 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 6.2kg/m. Auction-ID: A1-45026-2107

Steico Joist I-beam - 700x24x9 cm. Wooden I-beams for roof, floor and wall constructions. Lightweight and strong, with efficient use of materials. Limited thermal bridges. Constructed from flanges of LVL or solid spruce (approx. 39mm thick) and an 8mm hardboard core. Industrially produced for consistent quality. Weight: 5.2kg/m. Auction-ID: A1-45026-2113

With 27 inch Iiyama touchscreen monitor, keyboard and mouse Auction-ID: A1-45979-404

Stollen table white, edges 2 mm ABS with storage compartment under table top Note: Pallet in exchange Auction-ID: A1-45889-173

8 pieces Dekolight Linear 100 Article 707016 See datasheet 4000K - without rails, without connectors - - Figure shows assembly example - Auction-ID: A1-45889-358

Auction-ID: A1-45889-2823

Transport - Case 117 x 58 x 70cm filled with 18 LTS SLT 15002 silver with safety's and rail mount Auction-ID: A1-45889-1643

0,6m3 approx /approx 40pcs / rustic light quality Auction-ID: A1-45889-1550

Auction-ID: A1-45889-2758

0.8m3 Auction-ID: A1-45889-2560

10 pieces Dekolight Linear 100 Article 707016 See data 4000K - without rails, without connectors - - Figure shows assembly example - Auction-ID: A1-45889-360

John Deere parts 30/40/50 series John Deere parts 6000/6010/6030 series John Deere parts 7000/7010/7030 series Hydraulic pump 40/50 series Accumulators 30 series Bearings and seals Engine overhaul kit Coupling shaft front drive 6030/7030 series Bulbs 30/40/50 series Lamps R series Work light kits 6030/7030 series PowerQuad spare parts 6010/6030 series Tank Float and Pump 6030 Series Temperature Control 6030/7030 Series Grammer seat with air suspension, air cushions and heated seats Grammer cassette air suspension Bowden cables 6010/6030 series (operation) Wiring harnesses 6010/6030 series Hydraulic Control Valve 6000/6010 Series Auction-ID: A1-40135-207

John Deere R Series Parts John Deere 6030 Series Parts John Deere 7030 Series Parts John Deere 77/7810 series parts John Deere 40/50 Series Parts Various AGCO parts Filters and strings Cab parts Orbitrol R-series Drive shaft R-series Gasket Sets Radio Motor wiring harness Autopower spare parts 77/7810 series Hydraulic pump 4050 series Side cover 77/7810 series Towbar and fender parts Front Loader Rack 6030 Series Exhaust manifold Air compressor Heat shield PTO Shaft Adjustment 6030/7030 Series Fluid coupling Nitrogen balls Kubota cylinder head with water pump Auction-ID: A1-40135-206

8pcs 3-Phase Pendant Lamp - Slim, 5 W, 3000 K, White Item number: 707133 Housing Material: Aluminum Housing Color: White Housing colour, colour system traffic white RAL 9016 Halogen-free No Frequency 50 / 60 Hz Light Source Light Source Interchangeable TC Light source: LED Luminous efficacy 100.0 lm/W Light distribution symmetrical Color Consistency 6 SDCM Switching cycles 100000 Item weight: 486 g Connection option terminal Energy consumption 5 kWh/1000h Power Factor 0.9 Load Weight max. 0 kg Load force max. 0 kN Working temperature -20 to 45 °C Storage temperature -20 to 65 °C Mounting type: Surface-mounted assembly Mounting location inside Ceiling mounting surface Input voltage 200-240 V/AC Power consumption 5.0 W Dimmable No Motion detector No Power supply replaceable Yes by technician Protection class protection class I / protective earthing UGR 19 Light colour warm white (WW) C ...

2pcs 3-phase pendant lamp - Slim Item number: 707133 Housing Material: Aluminum Housing Color: White Housing colour, colour system traffic white RAL 9016 Halogen-free No Frequency 50 / 60 Hz Light Source Light Source Interchangeable TC Light source: LED Luminous efficacy 100.0 lm/W Light distribution symmetrical Color Consistency 6 SDCM Switching cycles 100000 Item weight: 486 g Connection option terminal Energy consumption 5 kWh/1000h Power Factor 0.9 Load Weight max. 0 kg Load force max. 0 kN Working temperature -20 to 45 °C Storage temperature -20 to 65 °C Mounting type: Surface-mounted assembly Mounting location inside Ceiling mounting surface Input voltage 200-240 V/AC Power consumption 5.0 W Dimmable No Motion detector No Power supply replaceable Yes by technician Protection class protection class I / protective earthing UGR 19 Light colour warm white (WW) Colour temperature 30 ...

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...

Can be connected on the Alfa Laval 205 skid Check our other Resale entries

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED