heat exchanger 70 used for sale

Electronic module, control card ZEISS 608481-9003-704 608481-0303 Spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm

Control Unit, Control Electronics, Numerical Control WMW, NILES TDR 700-112 ( TDR700-112 ) Input: 260 V 3AC 41 A 49 - 62 Hz Output: 275 V DC 50 A used, tested ! Dimensions: 280 x 250 x 160 mm

Servo Motor , Permanent Magnet Motor BOSCH EC-4E510 0 608 701 003 0.32 kW 7000 rpm 230 V shaft: Ø 14 mm New ! Dimensions: 250 x 105 x 60 mm

Hydraulic Cylinder REXROTH CD 70X 25/ 16-0500Z11/01HCDM11A ( CD70X25/16-0500Z11/01HCDM11A ) 00537363 stroke: 500 mm rod diameter Ø 16 mm Dimensions: 670 x 90 x 50 mm

Hydraulic Cylinder ORSTA S1-160/70x63 4688-8200/1/000 Piston diameter: Ø 160 mm rod diameter: Ø 70 mm stroke: 63 mm Pn 16 MPa Dimensions: 580 x 270 x 270 mm

Electric motor with brake SEW DV112M8/4/BMG/HR/TF/IS 1,000 2 / 2.2 kW 700 / 1440 rpm 400 V IP 55 Shaft diameter: Ø 28 mm Flange diameter: Ø 250 mm Bolt circle: mid-center 155mm Two speeds, new ! Dimensions: 490 x 320 x 250 mm

High-pressure mercury vapour lamp Pagus 700 W 220V, 5.45 A transformer Q700.04.3M16 used, tested ! Screen diameter: 570 mm height: 700 mm

Servo motor with brake and pulse coder PARKER BAYSIDE GM090-B2D2D 0,0,0,0 89 kW 702 rpm 207 V shaft: Ø 20 mm flange: 90 x 90 mm used, tested ! Dimensions: 330 x 90 x 140 mm

Fan Motor, Three-Phase Electric Motor VEM DM 126/84-AX6 TGL24696 0,0,0 04 / 0.25 kW 700 / 1400 rpm 380 V IP 44 Flange diameter(fan wheel): Ø 128 mm Flange diameter(motor): Ø 140 mm New !' Dimensions: 140 x 140 x 167 mm

Micrometer SOMET 700 - 800 mm CSN 251428 Accuracy: 0.01 mm in wooden box incomplete ! Dimensions: 1060 x 660 x 65 mm

Fan Motor, Three-Phase Electric Motor VEM ALM 124/84-AX6 T 201 ( ALM124/84-AX6T201 ) TGL20675 0,0,0 025 / 0.08 kW 700 / 1400 rpm 380 V IP 43 Flange diameter(fan wheel): Ø 127 mm Flange diameter(motor): Ø 125 mm New ! Dimensions: 132 x 132 x 159 mm

Face plate Pagus Outer Ø: 700 mm Bolt circle Ø : 150 mm Bore Ø: 95 mm flange Ø: 195 mm used ! Dimensions: 700 x 700 x 113 mm

Tool cabinet, drawer cabinet with base PAGUS 555 x 735 x 700 (usable height) mm 4 drawers used, tested ! Dimensions (cabinet): 555 x 745 x 820 mm Dimensions: 555 x 745 x 1025 mm

Belt cylinder PARKER 703468 EU/3200-032-02200-0000-0010 stroke 2000 mm Dimensions: 2450 x 87 x 52 mm

Clamping Plate, Clamping Table, T-Slot Grid Plate PAGUS Working Area: 700 x 315 mm Working Height: 120 mm Groove Width: 14 / 25 mm an edge field broken ! Dimensions: 700 x 315 x 120 mm

Universal clamping table, swivel, tilt and swivel table PAGUS clamping surface: 700 x 240 mm 5 grooves groove width: 12 / 20 mm can be rotated horizontally to the right and left 40 degrees can be tilted 30 degrees to the right and left 40 degrees Dimensions: 800 x 300 x 250 mm

Clamping plate, clamping table, machine table, T-slot plate LID Working surface: 700 x 250 mm for KF12 Plate thickness: 60 mm groove width: 12 / 21 mm used, tested ! Dimensions: 700 x 250 x 60 mm

Sweeper roller 1407974 974375 width: 700 mm diameter: Ø 300 mm bristle length: 80 mm Dimensions: 750 x 350 x 350 mm

Roller conveyor, conveyor belt (driven) All rollers driven. frame V2A roll width: 550 mm web width: 600 mm height: 960 mm length: 700 mm motor: 150 W 220 / 380 V dimensions: 700 x 710 x 960 mm still other parts available!

Cooler, Heat Exchanger, Oil Cooler PAGUS New ! Dimensions: 600 x 700 x 200 mm

Control cabinet, control cabinet BERNSTEIN CC-4000 694x596x280 ( CC-4000694x596x280 ) 1564100057 suitable for EL731 ! used, tested ! Dimensions: 700 x 600 x 290 mm

Directional Control Valve, 2/2 Way Angled Seat Valve with Pneumatic Actuator COCORDIA FLUIDTECHNIK 700/50/RR2 T-3 1300304 PN16 DN50 Rg5 New ! Dimensions: 290 x 290 x 160 mm

Combined precision rolling bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 70130 ( ARNB70130 ) INA No. ZARN 70130 TN ( ZARN70130TN ) Shaft diameter: Ø 70 mm Outer diameter: Ø 130 mm Bearing thickness: 82 mm New ! Dimensions (packaging): 150 x 150 x 110 mm

- Material: AISI 316 stainless steel - Standing on feet - Tanks, above, adapted to the cellar vault Dimensions : - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height at rear: 2500 mm - Total height at front: 3650 mm (including dome) - Ground clearance: 340 mm Equipment: - Rectangular door 320 x 420 mm - Total drain: flap valve DN 40, Friedrich no 2 - Residual drain: flap valve DN 40, Friedrich no. 2 - Taster - Level indicator - Dome DN 200

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Automatic wheel balancer, coolant filter, ruler and grinding and grinding wheel | automatical wheel balacer, coolant filter, blade and blade support grinding wheel, Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min / max to grinding: 2/150 mm, Regulating wheel width: 355 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 20/460 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x355 mm, Grinding wheel width: 355 mm, Maximum infeed grinding length: 355 mm, Coolant system motor power: 0.70 Kw., Motor power grinding wheelhead: 37 Kw., Total power: 45 Kw., Voltage: 220/380 Kw., Long: 1.165 mm, Width: 3.3 ...

Age 1990, refurbished in 2003 Consisting of : With auto-start facility Unwind Stand Indramat Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump Inline ILLIG UG70b Counter/ Stacker, with delivery conveyor Inline Grinder with Blower EXW our Warehouse Enger, Germany, max. mateerial width: 730 mm, max. Form Area: 680 x 280 mm, Infeed length: 300 mm, max. draw: 125 mm

Güntner Recirculating Cooler with 3 ebmpapst EC Fans 1.8kW 700kW cooling capacity

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

Robot pedestal for industrial robots The platform provides a stable and raised platform for the robot to ensure optimal positioning in the work area. Applications • Industrial robotics •Manufacturing processes • Material handling • Assembly and production lines Metrics: Mounting plate 1080 x 1030 mm Base plate 1230 x 1180 mm Material thickness: 25 mm Height: 700 mm More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: GROSS Behälter- und Anlagenbau,condition: used,volume: 70.800,bottom: Klöpperboden,construction: liegend,stand type: Sättel,total height: 3.000,total width: 3.000,total length: 10.500,nameplate: Yes,outlet: available,remarks: manhole approx. 350 x 450 mm in the front floor a container (9540-1) with a small bump under the bearing shell, a container (9540-2) without nameplate up to 4 identical additional tanks can be made available on request. The following saddle feet could be purchased separately for the container:

This Sterile Milk Tank has a Capacity of 16,700 Litres, it does not include the valve cluster and PLC program. There are a few valves available with the tank but these would need to be reconnected to a valve cluster program. This tank was connected to a central control room . The condition is good and there has not been any damages . Aseptic tanks are used for the process of Milk, Juice and other liquids required aseptic pasteurisation prior to the filling machines., The APV Aseptic Tank is a type of equipment designed for the storage and processing of liquids, particularly in industries such as food and beverage, pharmaceuticals, and biotechnology. Here are some key features of the APV Aseptic Tank:, - Sterile Environment: The APV aseptic tank maintains an environment that is free from contaminants, crucial for the integrity and safety of the stored product., - Construction Material: Ty ...

Platform trolley steel/wood approx. 70x100 cm, without contents

Material trolley metal grey approx. 70x50 cm, w. multi-socket strip

Order picking trolley steel blue approx. 70x110 cm, 3 levels, without contents

Office cabinets wood décor dark each approx. 70x185 cm 3 pcs.

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Load capacity: 700 kg -Platform: 2610 x 1000 mm -Roller conveyor: 500 x 2610 mm -Roller spacing: 230 mm -Roller diameter: 40 mm -Dimension retracted: 490 mm -Extended dimensions: 1260 mm -max. stroke: 770 mm -Hand switch -Quantity: 1 piece available -Transport dimensions: 2610/1020/H490 mm -Own weight: 558 kg

Electric motor, three-phase motor -Manufacturer: Perske, electric motor type NS80.10/8/2 -Power: 0.37/1.5 kW -Speed: 700/2900 rpm -Shaft: Ø 19 mm -V-belt pulley: Berges, symmetrical Ø 160 mm adjustable pulley see photo -Protection class: IP 54 -Design: B3 -Dimensions: 400/250/H200 mm -Weight: 40 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: Yale, double-acting hydraulic cylinder stroke 250 mm -Type designation: H-20/250 -Piston rod: Ø 42 mm -Lifting capacity: 20 t -Operating pressure: max. 700 bar -Dimensions: Ø 85 x 455 mm -Weight: 14.1 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Bobolowski, servo motor -Type: HTBL-S 070/035-3SPE-2-1111-C -Voltage: 700V -Shaft: Ø 14 x 25 mm -Techn. Data: see photo type plate -Number: 2x servomotors available -Price per piece -Dimensions: 140/70/H120 mm -Weight: 2.1 kg/pc.

fan, ventilator, electric motor, blower, emergency ventilation fan, smoke gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan -Manufacturer: Güntner, axial fan, axial fan, suction fan -Power: 2.79/1.36 kW 890/700 rpm -Fan: Ø 1000 mm -Quantity: 1 piece available -Dimensions: Ø 1000 x 330 mm -Weight: 56 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Yale, hydraulic cylinder with spring return, single-acting stroke 100 mm -Type designation: YS-23/100 -Piston rod: Ø 42 mm -Lifting capacity: 23 t -Operating pressure: max. 700 bar -Number: 3x cylinders available -Price: per piece -Dimensions: 150/85/H195 mm -Weight: 7 kg/piece

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: Pfaff, hydraulic cylinder short-stroke heavy-duty cylinder -Stroke: 20 mm -Piston rod: Ø 64 mm -Operating pressure: max. 700 bar -Number: 2x cylinders available -Price: per piece -Dimensions: 310/150/H85 mm -Weight: 13.4 kg/piece

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Yale, hydraulic pump hand pump -Type: HPS-1.7 -Pressure range: max. 700 bar -Tank capacity: 0.7 l -Quantity: 1x hand pump available -Dimensions: 720/200/H170 mm -Weight: 8.5 kg

equipped with swivel wheels, interval timer, height adjustable, Auction-ID: A1-43992-335

Equipped with swivel wheels, height adjustable, interval timer Auction-ID: A1-43992-330

Distance between the holms 920x760 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 250 mm, maximum open travel 1000 mm, maximum opening (hydraulic) 1900 mm, core pull 4, Machine was dismantled in 2017, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-4

Equipped with swivel wheels, height adjustable, interval timer Auction-ID: A1-43992-329

Distance between the clamps 860x760 mm, hole centering ring fixed plate Diameter 160 mm, minimum installation height 900 mm, maximum open travel 1000 mm, maximum opening (hydraulic) 1900 mm, core pull 4, Machine was dismantled in 2014, overhauled (Italy) and recommissioned, equipped with hydraulic screw drive, 159 Kw, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-2

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg