136,277 used machines on RESALE, but how to find them? Machine Search
Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker
Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degree ...
2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019
Transnorm belt curve conveyor left GKF 90°-700-500-IR750 - NEW with STORAGE MARKS (RUST) RA2418 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 750 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,25 m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2017 Condition: unused, but has marks from storage, as can be seen in the photos Optionally available: Supports Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2017 condition: neu mit Lagerspuren Nominal / inner radius in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Runni ...
Transnorm conveyor belt GF 14800-700-600 RA2196 Technical data: Conveyor length (NL): 14800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 or 0,42 Drive: SEW gear motor, R27 DT80N4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 14800 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor sp ...
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller ...
Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible.
Interroll Rising falling Incline belt conveyor with leading belt GF 7028 (6138+890)-690-580 RA2366 Technical data: Conveyor length (NL): 7028 mm ( 6138 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 7028 ( 6138 + 890 ) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine ty ...
Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg
Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Delta The scope of delivery includes: 01x Pallet rack trusses, used Material colour: yellow Box profile: 120 x 50 mm Truss type: HN120|30 Agraffe: 3 HK (hook) Weight / piece: approx. 22.50 kg Clear width: approx. 2,700 mm Max. load per pair of trusses 3,000 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Transnorm belt conveyor belt conveyor belt flap belt Smart Sort GF 1450-800-700 RA2037 Technical data: Conveyor length (NL): 1450 mm frame width (NB): 800 mm, 150 with motor Belt width (GuB): 700 mm headroom (BH)/transfer height : 800 mm Conveying speed (v m/s): 1.47 Drive: SEW gear motors, with brake at angle adjustment Electrical data: 50Hz V380-500, kW 0,37 drive belt and 2,2 drive angle height of sorting out bottom: 500 mm sorting height top 1200 mm Angle adjustment speed: 1s from min to max year of construction: 2009 Special feature / accessories: 4x proximity sensors for angle determination Optionally available: Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2009 condition: Ausstellungsstück Conveying length in mm: 1450 Nominal / outside width in mm: 800, 1150 Belt width ...
Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2250 Make: Lippert Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, s ...
Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2014 Roll division in mm: 65 scope of delivery: inklusive Frequenzumrichter, without supports KW: 1,5/S1 Electric data: 380-500 Bauhöhe in mm (BH): 250 Roll width in mm: 685 angle: 45° Links Conveying length in mm (NL): 1800, 2500, 3180 Frame width in mm (NB): 700 For individual, professional advice, simply contact us. Simp ...
Transnorm Rising falling Incline with arch belt conveyor GF 4500+700-600-500 RA2195 Technical data: Conveyor length (NL): 5300 mm ( 4600 mm incline + 700 mm arch ) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 5300 ( 4600 + 700 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...
Transnorm Rising falling Incline with arch belt conveyor GF 2200+1300-700-600 RA2189 Technical data: Conveyor length (NL): 3500 mm ( 2200 mm incline + 1300 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3500 ( 2200 + 1300 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: ...
Transnorm Rising falling Incline with arch belt conveyor GF 2200+900-700-600 RA2190 Technical data: Conveyor length (NL): 3100 mm ( 2200 mm incline + 900 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3100 ( 2200 + 900 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW ...
Transnorm belt conveyor GF 4900-700-600 RA2185 Technical data: Conveyor length (NL): 4900 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DRE90M4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2185 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4900 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Ampere: ...
Transnorm conveyor belt GF 3800-700-600 RA2182 Technical data: Conveyor length (NL): 3800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3800 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s ...
Transnorm accumulating roller conveyor with ejector 3820-700-645 RA2279 Make: Transnorm Running direction: both directions Roller width (RB): 645 mm Nominal/outer width (NB): 700 mm Length: 3820 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, WA20/T DR63L4/TH and 24 V drum motor Electrical data: V 380, kW 0.25/S1 Frame height: 120 mm A total of 6 modules available with 2 dischargers each. price per element There is a storage space between each discharger as a buffer Conveying speed: 0.33 m/s Optionally available: Supports Side guides on one and both sides Frequency converter for stepless speed control Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 3820 Nominal / outside width in mm: 700 Roll width ...
Height=0.4 m, Overall length= 0.35 m, Overall width= 0.4 m, Net weight= 27 kg,
Height=1.26 m, Overall length= 0.55 m, Overall width= 0.75 m, Net weight= 230 kg,
Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg
Height=1.15 m, Overall length= 0.85 m, Overall width= 0.7 m, Net weight= 83 kg,
WE sharp 7000, sharpening station for slicer knives, demo machine from exhibition
Manufacturer: LINEMATIC Model: LM34/705 Year of Manufacture: 2004 Power: 14 kW Voltage: 400 V, 20 A, 50 Hz Phase: 3-phase + Neutral + Protective Earth CE certified Find more here - .ucymachines/ Contact us at - sales@ucymachines
A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.
Steam capacity max.: 22 t/h Permissible operating overpressure: 91 bar HD overpressure: 83 bar HD - Temperature: 510 °! C Exhaust gas temperature: 160 °C Water capacity: 15.6 m³
Maho 700 C, built in 1983 Travel X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle holder: ISO 40 Speed: 3150 rpm Spindle stroke: 100mm Weight: approx. 3500kg Control: Philips CNC 432
Order- No.: 153-03 // Ser. No.: 1936 Equipment / Additional information: No. of ups: 3 Max. sheet size, width x length (cm) 1 up / 76 x 30,5 2 ups / 33.5 x 30,5 3 ups / 23.5 x 30,5 Min. sheet size, width x length (cm): 11 x 9.5 with small format equipment: 9 x 6.5 Max. pile height (mm): 150 Min. pile height (mm): 20 Max. speed (m/min): 200 Max. output (piles /h): 1,800 Banderol width (mm): 5 Pressing force (N): 35,000 Infeed height (cm): 40–105
CNC machining center from Urban Control: Heidenhain Track Control iTNC 530 4-axis Travel x/y/z – axis 7200 /450 /590 mm Working range x/y/z axis 7000 / 400 /350 mm Weight 14 t Equipment: Robust basic structure as a welded frame construction Ball rail guide on all axes Milling spindle unit: 100-12000 rpm, tool holder SK 40 Drives: X-axis 50 m/min by rack and pinion drive Y/Z axis 25m/min by ball screw B-axis 9000°/min Control panel swivels Automatic central lubrication Moving tool changer for 12 tool holders SK40 Cooling emulsion plant, machine people, security fence Electronic handwheel integrated into the control panel Chip drawers, laser scanners, minimum quantity lubrication Technical data see pictures.
DMG MORI NLX2500/700 with tool drive and C-axis Universal lathe with 3-axis Turning length 700 mm Main spindle with integrated motor spindle ISM (rod diameter in mm) Hydr. Clamping devices, clamping cylinders, chucks C-axis with hydr. Spindle brake 10-speed BMT star revolver 10-speed tool drive NC tailstock CELOS with Mitsubishi control M730UM
x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm table-size: 700 x 280 mm control: Heidenhain TNC 145 tool adaptor: SK40 turning speed range: 40- 2.000 U/min rapid speed: 1,5 m/min feed speeds: 1500 mm/min power requirement: 2.2 kW quill stroke: 63 mm weight: 1,3 t total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions: 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Granite measuring plate 760 x 1190 x 700 mm Dimensions: H x W x D 760 x 1190 x 700 mm Material thickness: 800 mm More items - new and used - can be found in our shop! International shipping costs on request!
Dematic roller conveyor transfer device, pusher, 90° 700-1000-690 RA2433 Make: Dematic TZM 90 Running direction: both directions Roller width (RB): 690 mm Nominal/outer width frame (NB): 760 mm Total width: 1000 mm Length: 700 mm Roller diameter: 50 mm Roller distance: 75 mm Frame height: 250 mm Transfer motor: SEW 3x 400V, 0.37 kW Optionally available: Side guide oneand both sides Supports Motor for driving the rollers Additional elements for expansion Net prices plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) angle: 90° nominal voltage: 400 Conveying length in mm: 700 Nominal / outside width in mm: 760 Roll width in mm: 690 Roll division in mm: 75 Driven: YES Engine type: SEW Getriebemotor scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. S ...
working width: 1150 mm working area:: 5700 m²/Std. total power requirement: 3,0 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,6 x 1,2 x 1,6 m Sweeper with charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Control: Mitsubishi M-720BM(MAPPS 3) Upper turret Tool holder: 12 Main spindle Max. spindle speed rpm: 4000 Spindle drive power kW: 18.5/15 Spindle bore mm: 91 Manufacturer: KITAGAWA Sub-spindle Spindle motor: 6000 Spindle drive power kW: 11/7.5 Spindle bore mm: 43 Manufacturer: KITAGAWA Equipment Conveyor Signal lamp Tool measuring arm High Pressure Pump Workspace light Common Variables for Custom Macros (100) Year of construction: 2011
Transnorm curved belt conveyor right bend 45°-800-700 IR1600 RA2435 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 1600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 1600 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adju ...
x-travel: 7000 mm y-travel: 2000 mm z-travel: 1250 mm control: Heidenhain iTNC 530 plate size: 7000 x 1500 mm tool change unit: 60 Pos turning speeds: 35 - 4500 U/min spindle motor: 37 kW rapid traverse: 20 / 10 m/min total power requirement: - kW weight of the machine ca.: - t required space: - m equipped with: - Heidenhain iTNC 530 CNC control - Tool changer for 60 tools (ISO 50) - autom. Milling head (0,001 °) - Spindle cooling 15bar with paper band filter - Chip conveyor - Renishaw RMP 60 - Extra Miling Head (Spare Part) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible.
Key data: 6500 kN, 105 mm
Location is : Latino America !
Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.
Key data: 1500 kN, 415 g/PS, 55 mm
Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!
roll diameter: 700 mm roll length: 1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-roll L-calender 700x1800 - used - BUZULUK 4-roll L-calender 700x1800 Type: 04706/P1 - Reverse L-shaped roller arrangement - The system was used for the production of PVC films - Film thickness: 0.05 - 1 mm - Can also be used for rubber - Maximum product width: 1,600 mm - Working speed: 6 - 60 m/min - System features roll bending and cross axis - BUZULUK temperature control and stretching device behind the calender - Year of manufacture: 1996 - Consists of 13 stretching and pulling rollers behind the last roller of the calender - The device is supplemented by 4 polishing rolls, - these 4 polishing rolls are temperature-controlled, - all rolls are driven via cardan joints, - all rolls can be temperature-controlled and ...
5 Printunit Offset + Coater unit RCI + Color Pilot, APL full autom. all washer Inktemperature Control ELTOSCH TL/IR Dryer Grafix Hitronic, AirGlide Delivery special Grippers approx. 260 million impressions
Manufacturer: Zerma Model: GSE 700/1000 Year of Manufacture: 2021 Inlet dimensions: 720 x 990 mm Rotor diameter: 700 mm Working width: 1000 mm 7 x 2 rotor blades 2 stator knives Sieve insert: 10 mm Ø Drive 75 kW, 1500 rpm, IP 55, 400 V, 50 Hz, IE3 The machine has not yet been assembled or put into operation and is therefore in mint condition. Feed Belt (Bias Belt 1) - Length (AA): 6000 mm - Width (GB): 980 mm - Drive: 1.5 kW - PVC stud belt with lower belt cover - Equipped with 2 × emergency stop buttons Switchgear - Load-dependent control - Mounted on a separate frame Extraction System – MFT 55/500 - Power: 11 kW - Pipeline: NW 200 mm Ø - Rack for bagging into double big bags - Cyclone: 800 × 2400 mm - Exhaust box with 12 exhaust hoses Metal Separator - NW 150 mm Ø - Quantity: 1 piece Fine Material Separator – Type FAS 500 - With MFT 30/300 blower (4 kW) - C ...
turning diameter: 460 mm turning length: 795 mm control: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mm spindle passage: 80 mm Traverse X/Z:: 260/795 mm Number of working hours: 19.552 h Cutting time: 10.704 h spindle drive: 18,5 kW total power requirement: 40 kVA weight of the machine ca.: 6,4 t dimensions of the machine ca.: 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rotary indexing table, positioning table, TC 700 T, Weiss, mint condition Special price The current market price of a comparable new rotary indexing table is approximately €13,600 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! A new rotary indexing table from a production company's spare parts warehouse. The part has never been used and is in mint conditin. Rotary indexing table, positioning table, TC 700 T, Weiss, as good as new, 1000 x 820 x 380 mm, 660 kg, Table D700 mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect ...
maximum number of results exceeded
please refine your search
