heat equipment used for sale

Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW

Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

heat holder - Alfa Laval - technical data (see also:) 750 litre/h Content: 7.31 ltr. average length: 19371 mm Diameter: 22 mm

Short-time heating plant of API Schmidt-Bretten as a complete production line (small dairy) with integrated milk separator and storage tanks (3 insulated stainless steel tanks / 1000 ltr.) Performance: approx. 1000 LTR. / h

electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

CLIMAVENETA AWR-MTD2-XE.0031MS Brand:CLIMAVENETA Type:AWR-MTD2-XE.0031MS Stock number:M23-4626 Cooling capacity:9.2 kW Application:Cooling / Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:3,5 kg Voltage:220 Volts Power consumption:5,19 kW Dimensions:900 x 420 x 1240 mm Weight:155 kg Year: New/unused Number in stock:3 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller/heat pump with a scroll compressor, water pump and expansion vessel. This machine is equipped with a separate control unit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q= 12,3kW at +40/45°C and +7°C). Visit our website: used-refrigeration

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

1 pieces. tanks 30,000 litres, fuel oil tank fuel tank fuel station gas station home service station storage tank storage tanks Court gas station steel tank according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid, is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted RAL 7042 - traffic-grey. (Other RAL colours are possible upon request!) L = 10,00 m / D = 2.00 m / weight CA. 5,7 tons. / free charged ex works ...

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

Battenfeld UTR 300 heating controller for control of Unilog 4000 B

S1 - insulated 40,000 litres steel tank, aboveground storage tank, cased in zinc plates, heating coil inside, on 2 steel bases, former palm oil tank, good condition. Details of the tank: Contents: approx. 40 m³ / 40,000 litres material: stainless steel tank length: 9,00 m diameter: approx. 2.70 m incl. insulation / 2.50 m without insulation insulation: mineral wool approx. 10 cm, with zinc plating other: heating coil inside, single-walled The container is used, emptied inside and has been cleaned professionally. According with the age there are traces of use. This steel tank / container can be used as a storage tank for whey, vegetable oil, water, liquid food, many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily.  ...

Laboratory Heating Press EHSP20H – Used Demonstration Machine Table press / electric screw press with pressing pressure 20 KN (2 tons) With heating device up to 200 °C from above and below. Press drive with screw jack gear, reduction ratio 1 : 12, spindle diameter 32 mm, Pitch 6 mm, pressing area approx. 100 150 mm, clear height and stroke approx. 300 mm. Geared motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max. dynamic load 20 kN. With reversing control, control box and motor protection plug. Sturdy press frame made of steel. Undertable made of high-quality aluminium profiles 4545 mm, table surface 600600 mm, Table top made of multiplex board. Total weight approx. 100 kg. The table press has a pressing pressure of 20 kN (dynamic load). Typical applications are pressing work with exact lining. Suitable for pressing bonding, embo ...

Piec Merrychef eikon® e2s jest doskonałym wyborem dla każdego, kto chce przygotować świeże, gorące posiłki na żądanie, gdzie wolna przestrzeń jest na wagę złota. Jest to najmniejsza jednostka oferująca najlepsze wyniki przyczyniające się do usprawnienia wszystkich czynności kuchennych. Piec jest łatwy w obsłudze, wszechstronny i zapewnia stały i wysoki poziom wydajności, który nieustannie wykracza poza oczekiwania. Piec jest dostępny jako eikon® e2s Classic w tradycyjnym wzornictwie Merrychef lub jako eikon® e2s Trend, z kolorową obudową na zewnątrz, łagodnymi krawędziami i miejscem na przechowywanie drobnych rzeczy na górze. Piec eikon® e2s jest idealnym sposobem gotowania, tostowania, grillowania, pieczenia i podgrzewania świeżych lub mrożonych produktów, takich jak kanapki, ciasta, pizza, ryby, warzywa i mięsa. Taka elastyczność wpływa poz ...

Laboratory heating press REITZ EHSP5H – used demonstration machine Heating press with pressing pressure 5 KN (0.5 tons) With heating device up to 200 °C from above and below. - Electric screw press press press force 5 KN (0.5 to) - Screw jack with spindle 20 mm, pitch 5 mm - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per revolution - Clear width approx. 60 mm - Pressing area 100150mm - Heating device with temperature control, 2 heating plates 100 x 150 mm - With TECO electric motor 0.18 KW - With reversing contactor control (up – down buttons) and emergency stop - Motor protection plug against overload, with main switch - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 100 kg . Suitable for foil bonding and embossing. Due to self-locking of the spindle, long holding time with constant pressure. The scr ...

Supply air heating system, NW250, 400V, 9KW, KMS, mint condition -80% Special price ! The current new price of a similar product is more than € 8,000 excluding VAT. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Top condition like a demonstration unit! The part was removed from a new machine that has demonstrably only run for approx. 100 operating hours. Technical data: - Supply air heater 9 KW - Heating cartridge with heating cross 400V 3x3000W - Incl. pipework, complete design in stainless steel + pipe insulation - Incl. corrugated flex sleeves - Stainless steel intermediate non-return valve AWS ZRK-VA-VA-200-F - Assembled incl. stainless steel mounting bracket - Price is without HEPA filter and Ex centrifugal fan, we are happy to offer - Parts list and drawing from KMS - Inlet side NW250 - Outlet side NW250 reduce ...

Reznor UDSA Gas Air Heater Gas WLE Type: UDSA050-4E Gas Appliances Type: BSP-C12-C32-C52-C62 Purpose: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. nominal heat load (Hs) QN: 58.60 kW Max. Nominal Heat Load (Hi) QN: 52.80 kW Min. Nominal Heat Load (Hs) QN: Min. Nominal Heat Load (Hi) QN: Max. nominal heat output: 48.58 kW Min. nominal heat output: Connection voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Degree of protection: IP20 Pin No. 0461BN0677 UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can  ...

with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled

Umwaelz pump heating pump pump new and unused, ovp 1 pcs Grundfos UPC 50-120 3-400Volt 50Hz Special price Special price

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modula ...

1 STERLING STERLCO used diathermic oil boiler with electric heating type S-9026-J0 serial nr. 95E5517 Dual zone Heating Capacity Zone 1: 18 KW Heating Capacity Zone 2: 36 KW Total Heating Capacity: 54 KW Pump Motor (Zone 1): 1.5 KW / 2 HP Pump Motor (Zone 2): 1.5 KW / 2 HP complete with circulation pumps and high accurency temperature controlers 1" oil circulation pipes (up to 110 L/min) 1" vent pipes (up to 110 L/min)

FOR SALE NEW UNUSED 4 PCS ALFA LAVAL HEAT PAC EHM 40KW TO WHOM IT MAY CONCERN ; WE VE 4 PCS-NEW UNUSED ALFA LAVAL HEATPAC EHM 40KW AT OUR STOCK. HEATPAC IS 440V YOB 2013 PLS FIND SPECT AT PICTURES IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

We offer as follows: 2 pieces Jenbacher CHP type JMS 316 GS-C21 Generator: inchAVKinch 1110 kVA Technical data: Engine power approx. 1922kW electrical power: approx. 736kW electrical efficiency approx. 38.3% Thermal power: approx. 912 kW Thermal efficiency: approx. 46.9% Built: 2000 The plants sing needed. The sale is subject to any warranty.

Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550?C useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

nett cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) steam heated max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed

The 30-40 KW Vaillant heat pump was an exhibit and ran for only a few hours - quasi-new! It is fully functional, max. energy efficient (A+) and suitable for all heat sources between -6 and 20 °C The VWS400 brine/water heat pump is intended as a heat generator for closed heating systems. Special features: – Flow temperature up to 65 °C for modernization and high hot water comfort – High efficiency thanks to modern, durable heat pump scroll compressor – Bivalent alternative or parallel operation possible – Increased living comfort in summer thanks to integrated cooling function (passive) – SG Ready and PV Ready – suitable for heating and hot water preparation – Up to 16 heating circuits possible thanks to integrated controller (with other accessories) Equipment: – Control for electric auxiliary heating up to 8.8 kW integrated – Sound decoupling of the  ...

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

Luchs Monoblock Heat Pump 6 kW with R290 – Your Sustainable Heating Solution for Every Home Are you looking for an eco-friendly heating solution that is both efficient and modern? Then the Luchs monobloc air-to-water heat pump with 6 kW is just right for you! This innovative heat pump not only offers a sustainable way to heat, cool and heat water, but also uses the natural refrigerant R290, which meets the highest environmental standards. Why should you choose Luchs heat pumps? Our heat pumps are manufactured in Poland under strict European quality and safety guidelines. For you, this means: short delivery routes, first-class workmanship and a future-proof investment in your home. With Luchs, you are choosing a reliable and sustainable heating solution that will give you pleasure in the long term. Easy installation and comprehensive equipment The Monoblock heat pump is s ...

Discover the LWP 45 E/S air-to-water heat pump from Luchs Wärmepumpen – your environmentally friendly solution for heating, cooling and hot water preparation. With an impressive heating capacity of up to 11.4 kW and the sustainable refrigerant R290 (propane), this unit not only offers the highest efficiency, but also meets all current European standards. High-quality European production Our heat pumps are manufactured in Poland, which stands for first-class quality and short delivery routes. You can rest assured that it complies with all EU safety and quality standards, so you get a product that is both reliable and durable. Fully equipped for easy installation The LWP 45 E/S comes fully equipped at the factory, including all essential components and an integrated circulation pump. This allows for effortless integration into existing heating systems without the need for ad ...

Discover the Luchs Monobloc LWP 59 E/S heat pump – your sustainable heating solution for a comfortable home Are you looking for a smart and environmentally friendly heating solution? The Luchs Monobloc heat pump LWP 59 E/S is exactly what you need! With its natural refrigerant R290, this heat pump meets the highest environmental standards while ensuring impressive energy efficiency. In this way, you can not only heat your home comfortably, but also actively contribute to the protection of our planet. High-quality production from Poland for the highest quality The Luchs heat pump is manufactured in Poland according to strict European quality and safety standards. This careful manufacturing guarantees you a durable and reliable product. In addition, you benefit from short delivery routes, so you can receive your new heat pump quickly and easily. Easy integration into your exi ...

Discover the LWP 72 E/S air-to-water heat pump from Luchs – your perfect heating solution for a comfortable home! With an impressive power rating of 12 kW, the LWP 72 E/S is ideal for single-family homes with high energy requirements or smaller apartment buildings. Whether you want to heat, cool or prepare hot water, this compact device offers you everything you need. Environmentally friendly and efficient The LWP 72 E/S uses the environmentally friendly refrigerant R290 (propane), which meets the highest European environmental standards. With an energy efficiency class of A+ at 35 °C and A at 55 °C, you can be sure that you are not only environmentally conscious, but also cost-efficient. High-quality European manufacturing Manufactured in Poland under strict quality and safety guidelines, the LWP 72 E/S guarantees durable technology and reliable product quality. Thank ...

Discover the LWP 88 E/S air-to-water heat pump from Luchs – your perfect heating solution for medium to large buildings! Are you looking for an efficient and flexible heating and cooling option for your home? The LWP 88 E/S air-to-water heat pump from Luchs is exactly what you need. With an impressive power rating of 14 kW, this powerful device is ideal for single-family homes with high heat requirements or smaller apartment buildings. Environmentally friendly and efficient An outstanding feature of the LWP 88 E/S is the natural refrigerant R290 (propane). This environmentally friendly refrigerant not only ensures excellent efficiency, but also meets the latest European environmental standards. So you can be sure that you are choosing a sustainable heating solution that is both environmentally friendly and reduces your energy costs. Quality from Poland Our heat pumps are ...

Luchs LWP 96 E/S: The perfect solution for your home Discover the Luchs LWP 96 E/S, a state-of-the-art heat pump that impresses with an impressive heating capacity of 16 kW. This versatile device offers not only efficient heating, but also cooling and hot water – all in one compact system. Ideal for larger single-family homes, apartment buildings or commercial applications, the Luchs LWP 96 E/S is the reliable, cost-saving and environmentally friendly choice for your home. Sustainability and efficiency combined With the environmentally friendly refrigerant R290 (propane), the Luchs heat pump meets the highest environmental standards and at the same time ensures maximum energy efficiency. Made in Poland under strict EU guidelines, this product stands for quality and durability you can trust. Easy installation for immediate use The monobloc complete system is supplied with ...

Luchs LWP 45 E M 3Ph – your environmentally friendly heat pump for year-round feel-good temperatures Experience the Luchs LWP 45 E M 3Ph, an innovative heat pump that combines heating, cooling and hot water preparation in a compact monobloc system. With an impressive 8kW power rating and environmentally friendly R290 (propane) refrigerant, this unit not only offers high efficiency, but also quiet operation – perfect for your home or smaller commercial facilities. European quality from Poland Manufactured in Poland under strict European quality standards, the LWP 45 E M 3Ph convinces with its precise workmanship and durable components. This heat pump is the ideal choice for all those who want to rely on modern, energy-efficient heating technology and at the same time protect the environment. Main technical data at a glance: - Nominal power: 8 kW - Heating capacity (A7/ ...

Luchs LWP 59 E M 3Ph – your environmentally friendly heat pump for year-round efficiency Discover the Luchs LWP 59 E M 3Ph, the perfect solution for heating, cooling and water heating in your home or small business. With an impressive 10kW power rating and environmentally friendly R290 (propane) refrigerant, this heat pump offers not only outstanding performance, but also quiet operation and sustainable technology – all in a compact monobloc system. European quality from Poland Manufactured in Poland under strict European quality standards, the LWP 59 E M 3Ph impresses with its robust workmanship and durable components. It is the ideal choice for single-family homes and smaller businesses that value efficiency and reliability. Main technical data: - Nominal power: 10 kW - Heating capacity (A7/W35): 6.0–15.0 kW - COP (A7/W35): 4.10–5.08 - Hot water capacity (A20/ ...

Type HLP Voltage 220 V Power 400 W Length 120 mm Diameter 8 mm Made in Germany Weight 70 g

Length 1155mm Thread diameter 47 mm Power 1500 W Voltage 230 V Transport dimensions 1220x70x70 mm Weight 0,8 kg

Luchs LWP 72 E M 3Ph – your environmentally friendly heat pump for year-round comfort Experience a new dimension of living comfort with the Luchs LWP 72 E M 3Ph! This highly efficient heat pump combines heating, cooling and hot water preparation in a powerful monobloc system. With an impressive power rating of 12 kW and the environmentally friendly R290 (propane) refrigerant, this model offers not only outstanding efficiency, but also quiet operation and sustainable technology that is good for the environment. European quality from Poland The LWP 72 E M 3Ph is manufactured in Poland under strict European quality standards. It impresses with its robust workmanship and high-quality components that ensure a long service life. This heat pump is the perfect choice for single-family homes or smaller apartment buildings with higher energy requirements that value comfort, efficiency a ...

Luchs LWP 88 E M 3Ph – The efficient air-to-water heat pump for your home Experience the Luchs LWP 88 E M 3Ph, a state-of-the-art air-to-water heat pump that not only provides cosy warmth and pleasant coolness, but also provides warm water for your home. With an impressive power rating of 14 kW, this model is the perfect solution for larger single-family homes or apartment buildings with high energy requirements. Thanks to the environmentally friendly refrigerant R290 (propane), you actively contribute to the protection of our environment. European quality from Poland Manufactured in Poland under strict European quality standards, the LWP 88 E M 3Ph convinces with its durable components and precise workmanship. Short delivery routes guarantee fast availability. If sustainability and energy efficiency are important to you, this heat pump is the ideal choice for your home. Te ...

Lynx LWP 96 E M 3Ph: Nowoczesna Pompa Ciepła Powietrze-Woda dla Twojego Domu Szukasz efektywnego i ekologicznego sposobu na ogrzewanie swojego domu? Poznaj lynx LWP 96 E M 3Ph – nowoczesną pompę ciepła powietrze-woda, która wykorzystuje naturalny czynnik chłodniczy R290 (propane). Dzięki kompaktowej konstrukcji monoblokowej, ta pompa łączy w sobie wysoką efektywność, niezawodność i trwałość, co czyni ją idealnym rozwiązaniem dla większych domów jednorodzinnych, budynków wielorodzinnych oraz obiektów komercyjnych z wyższym zapotrzebowaniem na ciepło. Europejska Jakość – Wyprodukowana w Polsce Luchs LWP 96 E M 3Ph jest produkowana w Polsce, zgodnie z rygorystycznymi europejskimi normami jakości i bezpieczeństwa. Dzięki precyzyjnemu wykonaniu oraz zastosowaniu trwałych komponentów, ta pompa ciepła oferuje doskonałe połączenie efektywności en ...

Kroll M 150 Mobile Warm Air Generator Application Heating of halls, tents and construction sites Frost-free keeping in horticultural businesses or warehouses of all kinds Fast drying of new buildings Additional heating in the cold season Fuel: Heating oil EL Nominal heat output: 135 kW Nominal heat load: 150 kW Oil throughput: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Degree of protection>: IP 44 Metrics: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg More items - new and used - can be found in our shop! International shipping costs on request!

Many thanks for your interest in our machinery, please find below our offer: Combined heat and power plant (CHPU)with up to 500KW A total of 3 independent cogenerators with combined heat and power; Electricity & hot water With only max 13280 operation hours! Operation is done with heating oil ! Permission available Total power approx. 500kw, cascade connection, in depending on power requirements, the various energy producers gradually switch on and regulate themselves on the performance. At peak load, all 3 systems work in parallel with full output Ideal for power supply in remote areas without public supply or as emergency power supply with simultaneous heat recovery if desired. Each engine has a heat exchanger. If heat is not needed, it can also be removed. The plant is constructed and ready, accordingly control etc. Top maintained. Spare parts for maintenance etc. av ...

Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...

sh. technical data muller martini

Heat exchanging type: VES 8''SX 1 FV minimum temperature: -10 St C pressure: 18 bar not used

GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg