We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,378 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Condition: Excellent The machine is designed for decapitation in continuous mode of cod fish, and can also beused for beheading perch. Size range: fish with a total length of 30-70 cm Performance: Up to 40 fish per minute. Power consumption: 1.87 kW Water consumption: 5 litres per minute. Belt width: 150 mm Divider height: 80 mm Height: 1450 mm Dimensions (DxXV): approximately 2160 x 885 x 1860 mm
Reconditioned & ready to install Set of cylinder heads for MWM TBG620 Rebuilt with all original MWM parts Currently in stock and available subject to prior sale. Email for price and photos
used
Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50
used
Recon Part number: 3.2107 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
used
RECON AND USED ON STOCK SOFORT LIEFERBAR
used
In good condition and ready to ship
used
EDI Autoflex Extrusion Die width 900 mm.
Various steel planers D125-D117
Planelkoepfe D160 - D 130 well used
used
We have Mak M20 Cylinder Heads for sale in our Stock Ex-Works. CONDITION: Old, Used in Good Condition with Pressure Tested
new
TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED GENUINE CYLINDER HEADS OF MAN PIELSTICK 2.3 AT OUR STOCK PART NO : 9439367 010 FOR YR GUIDENCE WE VE OTHER NEW AND RECON SPARE PARTS OF THIS ENGINE TYPE NEW PISTONS / RECON CYLINDER HEADS / CYL LINERS / MAIN BEARING SHEELS PISTON RINGS ETC ETC FOR YR GUIDENCE SOME OF THIS PARTS FIT FOR MAN PIELSTICK 2.2 & 2.5 EX STOCK . READY TO TRANSPORT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
used
150 x 250mm aperture.
used
Planausdrehkpof Wohlhaupter UPA 5 with accessories as shown. Cone ISO 50
used
throat: - mm tool adaptor: - power requirement: - kW : 23 mm spindle distance: max. 400 mm : 1200 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
inner taper of milling spindel: Sk40 collet diameter: nein turning speed range: 300 bis 3000 U/min drive motor: 15 kW weight of the machine ca.: 0,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
3-jaw-chuck diameter: 630 mm turning diameter over slide rest: 650 mm turning length: 500 mm turning dia. in gap: 1420 mm digital readout: Mitutoyo turning speeds: 3,55-710 U/min total power requirement: 24 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Masch. Ref. 23649
new
throat: 0 mm tool adaptor: 0 power requirement: 0 kW Different brands and sizes available M5 Titex 16,0x5,3x4,2 M6 Titex 16,0x6,4x5,0 M8 Titex 17,0x8,4x6,8 M10 Titex 18,0x10,5x8,5 M12 Titex 22,0x13,0x10,2 M16 Volz 27,0x17,0x14,0 M20 Volz 36,0x21,0x18,5 M24 Volz 40,0x25,0x21,0 M24-1 Gühring 40,0x25,0x21,0 M30 Gühring 50,0x31,0x26,2 M36 Gühring 62,0x37,0x32,0 M36-1 Gühring 62,0x37,0x32,0 M42 Gühring 74,0x43,0x37,5 M42-1 Gühring 74,0x43,0x37,5 M48 Gühring 86,0x72,3x43 Price upon request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter: 400 mm slide adjustment: 62 mm tool adaptor: MK 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 260 mm tool adaptor: 40 SK : S 20 x 2 für DECKEL Slide cross: 48 mm Weight: 5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
tool adaptor: ISO 40 Torque: 200 Nm turning speed range: 1800 U/min drive motor: 3,7 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 3000 U/min drive motor: 22 kW tool adaptor: ISO 50 Torque: 1000 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 1800 U/min drive motor: 5,5 kW tool adaptor: ISO 40 Torque: 290 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 1800 U/min drive motor: max. 44 kW tool adaptor: ISO 50 distance spindle - column: 460 mm Torque: 3180 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 1800 U/min tool adaptor: ISO 40 - 50 spindle taper: DIN 2080 / M16 drive motor: 7,5 PS quill stroke: 65 - 75 mm quill stroke: 65 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 3000 U/min drive motor: 30 kW tool adaptor: ISO 50 Torque: 1500 Nm Quick tool unclamping device (hidromechanic), on both spindles Tool taper DIN 69871 - Pull stud DIN 69872 B, on both spindles General dimensions as per the attached drawing VXZ-3900-36-DG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
tool adaptor: ISO 40 - 50 turning speed range: 1800 - 4000 U/min drive motor: 5 - 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Very nice old Toledo scale, calibratable, up to 120 kg
used
faceplate diameter: 1800 mm turning diameter over slide rest: 2500 mm turning length: mm Control: FAGOR 8050 T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Closing heads ALCOA for plastic screw caps pick-and-place PCO 28 mm tested and ready to work
used
Closing heads Krones for aluminium screw caps suitable for several types of closing machines like Alcoa, Adelski, Arol, etc. tested and ready to work
used
SEMIAUTOMATIC FILLING LINE 6 HEADS The machine is locatd in Italy.
used
Recon Part Number: 1231 3228 Diesel Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Wartsila 46 cylinder heads reconditioned by Wartsila Free of any cracks or welding Water pressure and crack tested In our stock in Istanbul Turkey Please contact: info@fin-marine
used
- Please note! Price per piece! - Suitable for TCG 2020 V12 - 12304116 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into ...
new
Sulzer RT FLEX 58T-B Cylinder heads complete 5 pieces available New, never used Other major parts also available In our stock in Istanbul please contact: info@fin-marine
used
accuhead machine, 300 kN clamping force. Extruder 80/24D. Accuhead 5 ltr. Die dia from 20 to 200 mm. mould dimensions: 800 x 700 x 2x250 mm (LxWxD) Spreading device, needle blow, waste punch, interval blowing, core pulls. Machine can be viewed under power until the end of January 2022
used
We have 8 pieces of L32 cylinder heads in our stock in Istanbul Nearly brand new condition with very low working hours crack tested and water pressure tested free of cracks or welding We also have pistons , liners , con rods, fuel pumps and more ... please contact us at: info@fin-marine for more information
RECON Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
RECON ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
new
turning speed range: 1800 U/min drive motor: 14,7 kW tool adaptor: ISO 50 Torque: 780 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: SHW Type: 5373-01 Speed max.: 1800 1/min Md max.: 600 Nm Angle: 90° Ratio: 1:1 Tool holder: SK 50
used
Manufacturer: SHW Type: 5373-01 Speed max.: 1800 1/min Md max.: 600 Nm Angle: 60° Ratio: 1:1 Tool holder: SK 50
used
Manufacturer: Alberti Type: T90-3.5
used
weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 500 x 210 x 270 mm
used
Description: For FMB 90 mm Mounting: 35 mm weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm
used
throat:580 mm tool adaptor:drm. 130 weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm