head borer used for sale

150 x 250mm aperture.

Impellerpump head,stainless steel,Jabsco model 28400 - 7015,Ø1½"

10 head filling machine,stainless steel,ADA type 2,with balance tank and sliding bar.

Eccentric screw pump head,stainless,acid-proof steel,Netzsch type NE 20

Lobe pump head,stainless acid proof steel,SSP model S6-0353-H7,with by-pass.

Lobe Pump head,stainless,acidproof steel,ITT pure flow type C2,displacement 0,936 l/rpm.

Lobe Pump head,stainless steel,SSP 300 ND,displacement 0,93 l/rpm.

Lobe Pump head,stainless,acidproof steel,Ibex MOG2030A,displacement 0,64 l/rpm.

Lobe pump head,stainless,acid proof steel,Ibex type MOG 2020A,0,64 l/rev.

Lobe pump head,stainless acid proof steel,Alfa Laval LKP-L 4055,with flused shaft seals.

Lobe Pump head,stainless,acidproof steel,Ibex type 1120 HA. displacement 0,3 l/rev.

Lobe pump head,stainless steel,INOXPA type SLR2-50/06-2,theo. cap. 0,3008 l/rev.

Lobe pump head,stainless,acid-proof steel,SSP type S3-0038-V07,displacement 0,384 l/turn

Lobe pump head,stainless steel,Willi F. Grassel type 200 NDA

Lobe Pump head,stainless,acidproof steel,Ibex type NMOG 1120 A,0,3 lpm.

Lobe pump head,stainless steel,APV type CL/1/021/10,with recirculation,0,21 l/rev.

Lobe Pump head,stainless steel,ITT jabsco B1-24100,displacement 0,24 l/rpm.

Lobe Pump head,stainless steel,Waukescha type IMC 440,displacement 0,18 l/rev.

Spray dryer nozzle head,stainless steel,Pasch Silkeborg TCR P 2052-1984

Spray dryer nozzle head,stainless steel,Pasch Silkeborg TCR P 2052-1984

throat: - mm tool adaptor: - power requirement: - kW : 23 mm spindle distance: max. 400 mm : 1200 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: Sk40 collet diameter: nein turning speed range: 300 bis 3000 U/min drive motor: 15 kW weight of the machine ca.: 0,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Angle head, milling head, drill head COLLET & ENGELHARD BFf 100/110 nu Tool holder: SK50 360 ° rotatable Flange: Ø 340 / 450 mm bolt circle diameter: Ø 390 mm 4x bore: Ø 25,5 mm Intermediate flange ( angle head side ): Ø 350 / 575 mm bolt circle diameter: Ø 390 mm 4x threaded hole: M24 x 2.5 intermediate flange (machine side): Ø 550 / 640 / 670 mm bolt circle diameter: Ø 610 mm 6x bore: Ø 16.5 mm, with countersunk hole Ø 25 mm, depth: 15 mm used, tested ! Dimensions ( angle head ): 670 x 450 x 450 mm Dimensions ( intermediate flange ): 200 x Ø 670 mm Dimensions ( transport box ): 1050 x 850 x 1070 mm

3-jaw-chuck diameter: 630 mm turning diameter over slide rest: 650 mm turning length: 500 mm turning dia. in gap: 1420 mm digital readout: Mitutoyo turning speeds: 3,55-710 U/min total power requirement: 24 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...

Masch. Ref. 23649

Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...

throat: 0 mm tool adaptor: 0 power requirement: 0 kW Different brands and sizes available M5 Titex 16,0x5,3x4,2 M6 Titex 16,0x6,4x5,0 M8 Titex 17,0x8,4x6,8 M10 Titex 18,0x10,5x8,5 M12 Titex 22,0x13,0x10,2 M16 Volz 27,0x17,0x14,0 M20 Volz 36,0x21,0x18,5 M24 Volz 40,0x25,0x21,0 M24-1 Gühring 40,0x25,0x21,0 M30 Gühring 50,0x31,0x26,2 M36 Gühring 62,0x37,0x32,0 M36-1 Gühring 62,0x37,0x32,0 M42 Gühring 74,0x43,0x37,5 M42-1 Gühring 74,0x43,0x37,5 M48 Gühring 86,0x72,3x43 Price upon request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter -Diameter: 160 mm -Number of teeth: 10 -Tungsten carbide inserts: 16 mm -Adjustment: SK50 -Weight: 14 kg

Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 140 mm -Height: 185 mm -Max. 8 divisions can be set -Bore center: Ø 35 mm -Weight: 30 kg

turning diameter: 400 mm slide adjustment: 62 mm tool adaptor: MK 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 260 mm tool adaptor: 40 SK : S 20 x 2 für DECKEL Slide cross: 48 mm Weight: 5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 600 mm tool adaptor: 50,60 SK power requirement: kW flange:: 500x500 mm Width of nail head: 270x220 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 600 mm tool adaptor: 60,60 SK power requirement: kW flange:: 500x500 mm Width of nail head: 320x300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotary indexing table, dividing head, dividing head -Four-jaw chuck: Ø 165 mm -Height: 185 mm -Dimensions: 240/320/H185 mm -Weight: 24 kg

throat: 760 mm flange:: 500x500 mm Width of nail head: 230x170 mm tool adaptor: nach DIN power requirement: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: ISO 40 Torque: 200 Nm turning speed range: 1800 U/min drive motor: 3,7 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: 22 kW tool adaptor: ISO 50 Torque: 1000 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: 5,5 kW tool adaptor: ISO 40 Torque: 290 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: max. 44 kW tool adaptor: ISO 50 distance spindle - column: 460 mm Torque: 3180 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min tool adaptor: ISO 40 - 50 spindle taper: DIN 2080 / M16 drive motor: 7,5 PS quill stroke: 65 - 75 mm quill stroke: 65 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: 30 kW tool adaptor: ISO 50 Torque: 1500 Nm Quick tool unclamping device (hidromechanic), on both spindles Tool taper DIN 69871 - Pull stud DIN 69872 B, on both spindles General dimensions as per the attached drawing VXZ-3900-36-DG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: ISO 40 - 50 turning speed range: 1800 - 4000 U/min drive motor: 5 - 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very nice old Toledo scale, calibratable, up to 120 kg

Riggs twin head depositor Model: 1000 Serial: TT1310 2011, twin head depositor, previously used for filling food grade oils 10l - 25l, with cycle counter

faceplate diameter: 1800 mm turning diameter over slide rest: 2500 mm turning length: mm Control: FAGOR 8050 T total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1010063 Type of machine CNC Facelathe Make TADU Type FS 1250 Build in nb Type of control FAGOR, 8050T Turnung diameter over bed 2500 mm Additional information 4-jaws chuck 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock

Cylinder head overhauled 146673-11050 Assy 746674-11121