head borer used for sale

Divider PAGUS Ø 295 mm Center height: 220 mm Pitch: 4 Groove width: 14 / 24 mm Groove depth: 24 mm Bore: 40 / 50 mm Base: 360 x 300 mm used, tested ! Dimensions 390 x 360 x 480 mm

Cutting head ROLLER ́S CENTRAL M40 x 1.5 mount: Ø 64 mm Dimensions: 80 x 92 x 92 mm

Dividing head with three-jaw chuck, electro-hydraulic MAZAK AJV25/405 Three-jaw chuck Ø 315 mm hole diameter: Ø 100 mm, not continuous ! hole depth: 140 mm turntable: Ø 280 mm groove width: 14 / 24 mm groove depth: 20 mm center height 200 mm pitch 360 used, tested ! Dimensions 630 x 530 x 420 mm

Dividing head with centering point and lathe chuck, dividing head, dividing table AVIA type FNCb Center height 110 mm spindle bore: Ø 26 mm < -br /> -90° - +90° rotatable -10° - +10° tiltable Mounting foot: 255 x 200 mm Turning chuck with second set of jaws chuck diameter: Ø 125 mm used, tested ! Dimensions: 600 x 400 x 270 mm

Drill head, adjustable 2-spindle drill head SIGLOCH & SCHRIEDER BORMASTER V 802 i : 1:1 Drilling capacity: max. Ø 8 mm flange: Ø 68 mm with connection adapter for shaft diameter Ø 15 mm used, tested ! Dimensions: 245 x 160 x 100 mm

Assortment axe heads, 112 pieces PAGUS 0.5 - 2 kg 1 - 2x weight head : 0.5 kg, Dimensions: 140 x 98 x 25 mm 2 - 4x weight head : 0.6 kg, Dimensions: 150 x 98 x 26 mm 3 - 4x weight head : 1 kg, Dimensions: 180 x 115 x 35 mm 4 - 27x Weight head : 1.25 kg, Dimensions: 205 x 108 x 41 mm 5 - 3x weight head : 1.25 kg, Dimensions: 195 x 120 x 40 mm 6 - 4x weight head : 1.4 kg, Dimensions: 198 x 130 x 40 mm 7 - 20x weight head : 2 kg, Dimensions: 232 x 154 x 44 mm 8 - 26x Weight head : 2 kg, Dimensions: 240 x 126 x 44 mm 9 - 22x Weight head : 1.6 kg, Dimensions: 340 x 114 x 45 mm ( hand bowl with blade ) Other quantities on request ! New ! Dimensions ( Packaging ): 830 x 580 x 580 mm Weight: 210 kg ( gross )

Milling head, horizontal milling head WMW Tool holder: SK40 Tool width: max. 55 - 105 mm diameter counter bearing: Ø 56 mm 360 ° rotatable hollow shaft ( drive ): Ø 48 mm, 2x keyway, groove width: 12 mm drive adapter: SK50 flange: 300 x 245 mm bolt circle diameter: Ø 285 mm 4x bore: Ø 18 mm 4x screw M16 x 2,0 used, tested ! Dimensions: 470 x 300 x 320 mm

Milling head, with clamping drive and coupling device WMW, HECKERT FSS400 Tool holder: SK50 360 ° rotatable inner flange diameter: Ø 250 mm outer flange diameter ( inside / outside ): Ø 429 / 585 mm ring groove diameter ( inside / outside ): Ø 480 / 502 mm Groove width: 22 / 36 mm Hookers: 42 mm Clamping drive: ROTO RECORD EDU I80 HDR coupling: EK IH used, tested ! Dimensions: 1000 x 590 x 450 mm

Dividing head WMW SK40 center height 100 mm tool mount: SK40 with collet chuck size 25 360° rotatable mount bracket: Ø 50 x 168 mm used, tested ! Dimensions: 390 x 290 x 340 mm

Cutting head ROLLER ́S Central R1/2 mount: Ø 64 mm Dimensions: 80 x 70 x 70 mm

4-spindle drill head, drill head WMW, HECKERT, Werkzeugmaschinenfabrik ZELLA-MEHLIS 003-7619 i : 1:1 Tool holder: 4x chuck ER16 spindle distance: 30 / 45 mm drive: SK45 housing diameter: Ø 90 / 95 mm used, tested ! Dimensions: 315 x 140 x 106 mm

Cutting head ROLLER ́S Central R3/4 mount: Ø 64 mm Dimensions: 80 x 70 x 70 mm

Milling head WMW Tool holder: SK30 Spindle stroke: 85 mm 360 ° rotatable < br />drive flange: Ø 22 mm, 2x driver, width: 20 mm flange: 260 x 205 mm hole spacing: 215 / 140 mm 4x bore: Ø 12,6 mm used, tested ! Dimensions: 500 x 270 x 320 mm

Cutting head ROLLER ́S Central R1.1/4 mount: Ø 64 mm Dimensions: 80 x 95 x 95 mm

Milling head WMW Tool holder: Ø 25 / 35 x 12 mm Spindle stroke: 80 mm shaft (drive): Ø 14 / 18 mm, 4x wedge profile, wedge width: 5 mm shaft length: 20 mm Flange: Ø 228 / 175 / 145 mm ring groove: Width:15 / 27 mm, Depth: 24 mm Shaft guidance: Ø 60 x 32 mm, Ø 59 x 4 mm, Ø 40 x 10 mm Milling mandrel: Ø 27 mm used, tested ! Dimensions ( without milling mandrel ): 410 x 280 x 230 mm

Dividing head WMW Ø 45 mm center height 100 mm tool mount: Tension collets Ø 45 mm 360° rotatable mount bracket: Ø 50 x 168 mm used, tested ! Dimensions: 330 x 300 x 360 mm

Cutting head ROLLER ́S ROLA-H Pg 16 mount: Ø 64 mm Dimensions: 120 x 86 x 86 mm

Dividing head, dividing head, dividing table, with tailstock and fixed tip TOS Type DU 250AS Center height 135 mm Tool holder (spindle ): SK 40 360° rotatable -10° - +100° tiltable diameter (clamping plate): Ø 160 mm groove width: 12 / 24 mm groove depth: 20 mm New ! Dimensions: 650 x 460 x 280 mm

Cutting head ROLLER ́S ROLA-H Pg 21 mount: Ø 64 mm Dimensions: 120 x 86 x 86 mm

Cutting head ROLLER ́S ROLA-H Pg 29 mount: Ø 64 mm Dimensions: 125 x 100 x 100 mm

Cutting head ROLLER ́S CENTRAL M25 x 1.5 mount: Ø 64 mm Dimensions: 80 x 80 x 80 mm

Holder for threading head WMW Z39 outer diameter: 180 mm inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm  

Sealing head, sealing cone, Push-Lok hose fitting, 25 pieces PARKER 3CA82-12-6B DN10 Material: Brass Hose inner diameter: Ø 9,5 mm ( 3/8 inch ) Tube Outer Diameter: Ø 12 mm Thread: M18 x 1.5 Width across flats: 22 mm Armar connection: DKOL with union nut and O-ring New ! Dimensions ( single sealing head ): 39 x 25 x 22 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Sealing head, sealing cone, Push-Lok hose fitting, 11pcs PARKER 3CA82-15-8B DN12 Material: Brass Hose inner diameter: Ø 12,Ø 12,7 mm ( 1/2 inch ) Tube Outer Diameter: Ø 15 mm Thread: M22 x 1.5 Width across flats: 27 mm Armar connection: DKOL with union nut and O-ring New ! Dimensions ( single sealing head ): 44 x 31 x 27 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Sealing head, sealing cone, Push-Lok hose fitting, 5pcs PARKER 3CA82-22-12B DN20 Material: Brass Hose inner diameter: Ø 19,1 mm ( 3/4 inch ) Pipe outer diameter: Ø 22 mm thread: M30 x 2 width across flats: 36 mm DKOL with union nut and O-ring New ! Dimensions ( single sealing head ): 58 x 41 x 36 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Magnetic coupling pump head, pump head SONDERMANN PUMPEN + FILTER GmbH & Co. KG RM-PVDF-VKKK/40-15 PUMA.com 02.B.01-29 connection ( suction side ) : Ø 25 mm / G 1 1/4 ( inches ) Seal: O-ring connection ( pressure side ) : Ø 20 mm / G 1 1/4 ( inches ) Seal: O-ring Flange diameter: Ø 94 mm bolt circle diameter: Ø 105 mm hole diameter: Ø 6.5 mm Material: PVDF New ! Dimensions: 142 x 105 x 85 mm

Magnetic coupling pump head, pump head SONDERMANN PUMPEN + FILTER GmbH & Co. KG MAGSON BG 5 MA-PESK-18/320 70-00024 Qmax.: 320 l/min Hmax.: 18 mWS Connection ( suction side ) : Ø 37 mm / G 1 1/2 ( inches ) Seal: Flat gasket connection ( pressure side ) : Ø 36 mm / G 1 1/2 ( inches ) Seal: Flat gasket Flange diameter: Ø 185 / 130 mm bolt circle diameter: Ø 190 mm hole diameter: Ø 9 mm Material: PP, EPDM New ! Dimensions: 230 x 200 x 185 mm

Magnetic Coupling Pump Head, Pump Head SONDERMANN PUMPEN + FILTER GmbH & Co. KG BG 3 RM-PP-V-16/200-30S 60-114977 0 Qmax.: 200 l/min Hmax.: 16 mWS Connection ( suction side ) : Ø 44 mm / G 2 ( inch ) Seal: Flat gasket connection ( pressure side ) : Ø 25 mm / G 1 1/2 ( inches ) Seal: O-ring Flange diameter: Ø 163 / 124 mm bolt circle diameter: Ø 150 mm hole diameter: Ø 6.5 mm Material: PP, FKM New ! Dimensions: 186 x 165 x 125 mm

Magnetic coupling pump head, pump head SONDERMANN PUMPEN + FILTER GmbH & Co. KG RM-PPsw-VGKKK-20/220-60 PUMA.com 20.2206.006 Qmax.: 220 l/min Hmax.: 20 mWS Connection ( suction side ) : Ø 44 mm / G 2 ( inch ) Seal: O-ring connection ( pressure side ) : Ø 25 mm / G 1 1/2 ( inch ) seal: O-ring Flange diameter: Ø 163 / 124 mm bolt circle diameter: Ø 150 mm hole diameter: Ø 6.5 mm Material: PP, FKM New ! Dimensions: 186 x 165 x 155 mm

Magnetic coupling pump head, pump head SONDERMANN PUMPEN + FILTER GmbH & Co. KG RM-PVDF-EGKK-30/350-60 PUMA.com 30.3506.011 Connection ( suction side ) : Ø 49 mm / G 2 3/4 ( inch ) Seal: Flat gasket Connection ( pressure side ) : Ø 30 mm / G 2 ( inch ) Seal: O-ring Flange diameter: Ø 177 / 146 mm bolt circle diameter: Ø 185 mm hole diameter: Ø 10 mm Material: PVDF New ! Dimensions: 207 x 205 x 168 mm

Face and boring head NAREX Vhu 80 ( Vhu80 ) Mounting: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm

Face and boring head WMW C 100 - 40 TGL 32680 Mounting: SK40 Rotary chisel: Ø 20 mm used, tested ! Dimensions: 190 x 100 x 83 mm

Face and boring head WMW B71 TGL 2607.1 mount (machine side): SK40 with insert mount used, tested ! Dimensions (face and boring head): 216 x 65 x 70 mm

Stainless steel cylinder head screws with hexagon socket, 70 pieces PAGUS M16 x 45 mm DIN 912, ISO 4762 pitch: 2.0 head diameter: 24 mm head thickness: 16 mm width across flats: 14 mm Material: stainless steel A2 New Dimensions ( packaging ): 235 x 150 x 130 mm

Drill head with cross edge, cross crown, drill bit BWS Ø 102.5 mm length: 195 mm mount: spline shaft, 6 wedges, 10 mm wide spline shaft diameter: 34 / 46 mm New ! Dimensions: 200 x 110 x 110 mm

Suction lifter, 2-head suction lifter, rocker arm suction lifter, 2 pieces VERIBOR Ø 120 mm in plastic case used, tested ! Dimensions(single suction lifter): 330 x 120 x 70 mm Dimensions(case): 360 x 280 x 140 mm

Suction lifter, 3-head suction lifter, rocker arm suction lifter, 2 pieces BOHLE VERIBOR BO s3.0BL load capacity: 100 kg head diameter: Ø 120 mm 3 suction heads in plastic case New ! Dimensions(single suction lifter): 345 x 235 x 85 mm Dimensions(case): 450 x 370 x 125 mm

Suction lifter, 2-head suction lifter, rocker arm suction lifter, 2 pieces BOHLE VERIBOR BO s2.4BL Load capacity: 60 kg Head diameter: Ø 120 mm 2 suction heads in plastic case New ! Dimensions(single suction lifter): 345 x 120 x 85 mm Dimensions(case): 340 x 275 x 125 mm

Drill head, boring head, spindle head WIDIA Ø 6 - 20 mm Order No.: 341 / 89184840 Fbk: 110 / 276 / 1 mount: SK40 Tool diameter: Ø 12 mm New ! Dimensions ( drill head ): 197 x 63 x 63 mm Dimensions ( packaging ): 220 x 100 x 100 mm

Dividing head, dividing head, dividing table, with tailstock WMW Type TU 100 ( TU100 ) Center height: 105 mm Dividing head: Mount: MK4 ( inside ) / cone Ø 51 / 54 mm x 10 mm ( outside ) Flange diameter: Ø 108 mm, bolt circle diameter: 75 mm 3x threaded hole: M10 x 1.5, Depth: 20 mm -15° - +105° tiltable spindle bore: Ø 24 mm Base: 105 x 195 mm tailstock with quill and fixed grain tip Tool holder: MK2 quill stroke: 35 mm quill: +/- 5° tiltable foot: 70 x 142 mm used, checked! Dimensions ( dividing head ): 480 x 450 x 260 mm Dimensions (tailstock) ): 220 x 70 x 115 mm

Unscrewing head, fine turning tool WOHLHAUPTER MVS32-18 310003 Cutting edge diameter: 43 - 54 mm Holder shaft: Ø 18 mm, length: 22.5 mm Function length: 52 mm Total length: 88 mm New ! Dimensions ( unscrewing head ): 88 x 36 x 32 mm Dimensions ( transport box ): 95 x 37 x 37 mm

Fine boring head, boring head, fine turning tool WALTER B2110M B2110M.0.25.73.029.01 Cutting edge diameter: 22 - 29 mm Total length: 80 mm New ! Dimensions ( fine boring head ): 80 x 25 x 25 mm Dimensions ( transport box ): 88 x 35 x 35 mm

Tool head, clamp holder, tool holder, tool carrier 62.43003.00362 Total length: 105 mm tool system: KM40 2 plate seats New ! Dimensions ( tool head ): 105 x 40 x 50 mm Dimensions ( transport box ): 110 x 60 x 60 mm

Facing and boring head PAGUS MK4 holder (machine side): MK4 with internal thread M14 x 2.0 Depth: 30 mm holder ( turning chisel ): 8 x 8 mm / 2x Ø 10 mm used, tested ! Dimensions: 202 x 57 x 55 mm

Face and boring head, with impact cutter PAGUS MK4 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 30 mm receptacle ( turning chisel ): 8 x 8 mm used, tested ! Dimensions: 285 x 95 x 110 mm

- technically efficient, ready to work - after full service

LED articulated head lamp, machine lamp, system light WALDMANN SPOT LED 003 3x 6 W 24 V AC/DC Cable length: approx. 1.0 m Magnetic base: Ø 86 mm used, tested ! Dimensions ( without cable ): 140 x 120 x 150 mm

Dividing head, dividing head, dividing table, with tailstock TOS KURIM Type DU200AN Center height: 105 mm Dividing head: Receptacle: Inner diameter: Ø 48 mm, depth: 50 mm -10° - +100° tiltable spindle bore: Ø 22 mm Base: 155 x 215 mm tailstock with quill and fixed grain tip Tool holder: MK3 quill stroke: 40 mm quill: +/- 5° tiltable foot: 100 x 140 mm used, tested ! Dimensions ( dividing head ): 400 x 395 x 230 mm Dimensions (tailstock) ): 242 x 100 x 125 mm

Dividing head, dividing head, dividing table, with tailstock WMW Center height: 135 mm Dividing head: Mount: Three-jaw chuck DH 160 x 3 diameter: Ø 160 mm, bore Ø: 422 mm -10° - +100° tiltable spindle bore: Ø 48 mm Base: 220 x 300 mm tailstock with quill and fixed grain tip center height: +15 / -10 mm height adjustable quill stroke: 30 mm Base: 120 x 177 mm used, tested ! Dimensions ( dividing head ): 450 x 480 x 260 mm Dimensions ( tailstock ): 235 x 120 x 140 mm

2 pieces Hohner head mounts (suspension) for Theisen & Bonitz Booklet Maker Price per 1 pc. Art.: PS3135