he used for sale

Labeler, floor labeler Herma GmbH Stuttgart Type Labelling unit PAX 230 V, 50 Hz very good condition, directly from production! 2 identical labelers available

Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW

Turning diameter via guideways 900mm, rotary diameter via flat slider 380mm, turning length 780mm, three-jaw chuck 630mm, 6-speed tool turner, CNC control Siemens 802, drives and control cabinet renewed

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Alcolor with MGE cooling, CP2000, Autoplate, Preset, all washers, coating unit, extended delivery X1, IR dryer, Eltex antistatic, Grafix alphatronic 200 powder sprayer

- suitable for embossing and diecutting - standard machine - with the existing accessories

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

No. 3999: 1 used Universal tool milling machine Make HERMLE, type UWF 801, 1988 with Heidenhain TNC 135 Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid Table 800 x 390 mm Chip tray Documentation Other: Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg

No. 2179: 1 used Universal tool milling machine MAKE HERMLE, type UWF-801, built 1980 with Heidenhain TNC-124 track control Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid table 800 x 350 mm, Chip tray, automatic tool clamping, Coolant device, operating instructions, electronic handwheel in the control panel Other: Spindle ISO-40, Speed range 45-2000 rpm, Feed range 4-1600 (1000) mm/min, Rapid speed 1.6 (1) m/min. Space requirement approx. 2.3 x 2.3 x 1.8 m, Weight approx. 1100 kg.

Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz

x-400,y-330,z-350,angle table 630x335,SK 40, 40-6,000 rpm,measuring probe

Pull-off trolley with 9 cloth pull-off apperates suitable for Heuft VTR Thermo Roll / Daub RDTO Thermo Roll oven. The pullers can be used for ovens with 2 times deep sheet metal mass 80x60cm. With this pull-off appress and a stone slab trolley, they can also bake in the Thermöl wagon oven on stone served by a Man.Option we also have the stone slab cart for two times deep oven in the warehouse. with 9 pullers on rolls Stainless steel trolley Dimensions wagons: Height: 196 cm Width: 160 cm Depth: 90 cm

1 JAMES HEAL Elmatear tear tester for accurately testing textiles, nonwovens, and a wide variety of similar materials, including paper, board, and plastic

Used pliers gripper with segments A.S. and B.S - suitable for Heidelberg Era Speedmaster SM74 - for semi-automatic and fully automatic turn - Plier sgripper v.Bj.2017 - without damage and breakpoints - continuous run 100% accurate - Lagerboks have no game - Curve rollers and needle bearings v. segments kpl.renewed - 100% functional

Grinding diameter maximum: 100 mm Grinding diameter minimum: 1 mm Grinding wheel diameter: 400 mm Grinding wheel width: 0 mm MACH-id     5461 MAKE          Herminghausen TYPE            SR-3 YOP              1974 SPECIFICATIONS Grinding Ø     1 - 100 mm Grinding stone dimensions      400 x 180 x 203 mm Grinding stone speeds        1500 Rpm DIMENSIONS Length        2500 mm Width          2000 mm Height          1800 mm Weight          3500 kg

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.

Grinding diameter maximum: 105 mm Grinding diameter minimum: 2 mm Turning diameter: 0 mm Grinding depth: 1500 mm MACH-id   5409 MAKE       HENNINGER KG Germany TYPE         ZS 150 YOP           1988 SPECIFICATIONS External workpiece Ø Min.   5 Ø Min. External workpiece Ø Max.  105 Ø Max. Internal workpiece Ø Min.  2 Ø Min.Internal workpiece Ø Max.  90 Ø Max. Max. product length      1500 mm Speeds / ranges         24.000 Rpm Max. grinding angle       45 - 120 ° Max. workload weight       145 Kg DIMENSIONS Length      100 mm Width       700 mm Height      2200 mm

No.: 50116 n1-n2= 60-1100 rpm 112 W 220 V 50 Hz on tripod Dimensions LWH: 300 x 300 x 900 mm

From stock Solenoid valve for air intake Hekomatic 12072648 MWM 12072648

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

Rische & Herfurth foil welding Type Polystar 583HP 1.75A 230v Heating 200W Heating temperature max 197°C Mobile on table Foil hose width 80mm; 150mm; 400mm Dimensions Table 1.2m0.8m1.7m High

Thank you for your interest in our new machines, which we can offer you as follows: Model: Roller embossing machine for hard candies with motor and starter Roller dimensions: approx. 58mm x 177mm Dimensions: approx. 500mm x 500mm x 350mm (lxbxh) Weight: about 100 kg. Details: with a set of brass preemine balls round shape (ball) without structure (pattern). You can choose one from our approximately 300 shapes and determine the size or you give us your own shape and size. The machines are handmade, smaller tolerances / deviations in the design or design, painting etc. are unavoidable and are irrevocably recognized when placing the order. Material certificates are not provided from hess warehouse. Lichtenau

Properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 4 pieces in stock Price per piece Technical data: Manufacturer: Hermann Schmidt Built: 1994 Total length (retracted): 6,100 mm Total length (extended): 11..600 mm Drive type: Hydraulics Total width incl. control cabinet: 1,400mm Total width: 950mm Head incl. frame: 1.660mm Colour: Red Belt type: Smooth Belt width: 2x 600mm 1x 590mm 1x 500mm telescopic belt conveyor The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal operation. During transport, the telescopic belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the delivery ...

Mixer/agitator container Manufacturer Hebold Content 1500 litres Stainless steel, standing single-walled Flow breaker Cip ball

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

Herbort Cube Cutter 10/10

M. No.: 3463 / 18 (91.144.1301/021) Max. Format: B1

M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz

We offer you a used pallet racksystem manufacturer Jung Heinrich for sale. Technical data on the pallet racking system: Shelving system: Jung Heinrich Type: T Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 19,600 mm Number of fields per row of shelves: 05 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Technical data on volume: Number of pallet slots per field: 12 pcs. Number of pallet slots per row: 60 pcs. Total number of pallet slots: 60 pcs. based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 450 kg Included are: 06x Pallet rack, used Material color: blue Stand profile: 100 x 65 mm Incl. transverse and diagonal st ...

Center height: 750 mm Center distance: 4000 mm Spindle bore: 150 mm MACH-id    4107 MAKE        HEID TYPE          D l 1520 YEAR         1979 SPECIFICATIONS Swing over bed Ø     1500 mm Swing over cross slide     1110 mm Distance between centres       4000 mm Work piece weight         10000 kg Spindle bore      150 mm Spindle speeds / ranges          140 Rpm Bed width          850 mm Power      42 Kw DIMENSIONS Length       10000 mm Width        2800 mm Height       2400 mm

Turning diameter: 1400 mm Turning height: 600 mm Chuck diameter: 1400 mm Number of chucks: 1   CNC Brand: Fagor CNC Model: 8055 MACH-id    3988 MAKE         Hegenscheidt Germany TYPE           RQ YEAR          Overhauld 2006 SPECIFICATIONS Controll    Fagor 8055 Max. turning diamter Ø    1400 mm Table / chuck size Ø     1400 mm Workpiece height     600 mm Work piece weight    2000 Kg Singel column or double column   Single column Spindle speeds / ranges   2 steps - 224 Rpm Power   50 Kw DIMENSIONS Length    3800 mm Width      3500 mm Height     3500 mm In 2006 Rebuild:Control Fagor 8055 CNC Rittal Electric cabinet New cable  ...

New floor oven HEIN, type: Shopestone -exhibition exhibitor- - Ring tube oven - electric heating - Number of flocks: 5 pieces - Sheet size holder: 60 x 80 cm - Dimensions: B 1,300 x D 1,700 x H 2,145 mm - Exhibition exhibit - Condition: Very good, ready for immediate use Delivery and installation possible by arrangement.

Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg

CARBONATOR capacity: 13.000 l / h - 3-step

Capacity: approx. 30.000 l / h

Capacity: 50.000 bt. / h Currently equipped for 0.25l Vichy / 0.25l Gastro / 0.50l GdB / 0.70l GdB / 0.75l GdB / 0.75l Benelux / 0.75l Gastro Bottles. • Inspection of the mouth sealing surface • Inspection of the side wall (both sides) • Inspection of the thread • Detection of conductive residual liquids • Detection of residual liquids by IR • Diversion of faulty bottles • Diversion of bottles exceeding height and/or width as well as lying bottles Incl. module for detection of impact spots Incl. blower for removal of water drops

HEIDELBERG MOZ-S+ from 1991 with CPC & CP Tronic a 2 Colors press of size 48 x 65 cm Option ; Alcolor Dampening with Baldwin, PLUS Verion Quick Action Clamp Barr, CP TRONIC - Washers on ; Rollers and Blankets, CPC 1.01 - Ink Control Table, STRAIGHT, Print Cylinders Registered with CPC, A School press was NEVER REALLY USED Condition ; As NEW, Only 11 million Imp. Immediately available UNDER POWER in our Factory at Strasbourg FR

Capacity: approx. 25,000 l / hr

Capacity: approx. 25,000 l / h

Table length: 700 mm Table width: 700 mm Longitudinal X: 850 mm Cross Y: 700 mm Vertical Z: 500 mm Positions ATC: 75   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MAKE   Hermle germany TYPE    C  40U + PW 160 YEAR   2004 SPECIFICATIONS X - Travel   850 mm Y - Travel   700 mm Z - Travel    500 mm Controll   Siemens 840D Table Length x Width   700m x 700 mm Table load in kG    800 Kg Spindle Taper    HSK 63 kW power on spindle    15 kW Spindle speeds / ranges    18000 Rpm ATC tool changer  75 ( 32 + 43) Coolant true spindle / Bar   40 Bar Number off controlled axis   5 DIMENSIONS Length    10000 mm Width      6000 mm Height     3400 mm

Table length: 630 mm Table width: 630 mm Longitudinal X: 650 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 75   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MAKE   Hermle Germany TYPE     C30U Dynamic YEAR    2008 SPECIFICATIONS X - Travel   650 mm Y - Travel   600 mm Z - Travel    500 mm Controll    Siemens 840D Table Length x Width   630 mm Table load in kG   800 Kg Spindle Taper   HSK 63 Spindle speeds / ranges  28000 Rpm ATC tool changer   75 ( 32 + 43) Coolant true spindle / Bar    40 Bar Number off controlled axis  5 DIMENSIONS Length   4100 mm Width     3000 mm Height    3200 mm  

Table length: 630 mm Table width: 630 mm Longitudinal X: 650 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 75   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MAKE  Hermle Germany TYPE    C 30 U YEAR   2010 SPECIFICATIONS X - Travel   650 mm Y - Travel   600 mm Z - Travel   500 mm Controll    Siemens 840D Table Length x Width   630 mm Table load in kG   800 Kg Spindle Taper   HSK 63 Spindle speeds / ranges   18000 Rpm ATC tool changer   75 ( 32 + 43) Coolant true spindle / Bar   40 Bar Number off controlled axis   5 DIMENSIONS Length   4100 mm Width    3000 mm Height    3200 mm

- for processing hinge systems and connection fittings - Advantages of hole-row drilling in the system 32 - Machine stand with lift - Switching console - Foot pedal - Pneumatic connection (6 - 7 bar, air consumption per stroke 1.2 ltr.) - Blow-off gun incl. hose and T-connection - Drilling gearbox with 19 spindles - pneumatic holders - Press-in die present - Stop ruler - Table profiles - Wooden pad - Suction nozzles (diameter 80 mm) The machine is mounted on a mobile cabinet and can also be delivered with it. The machine is completely cleaned and has been checked for its function. (Changes and errors to technical data and prices reserved!)

Table length: 630 mm Table width: 630 mm Longitudinal X: 650 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 75   Positions APC: 0   CNC Brand: Siemens CNC Model: 840 D MAKE   Hermle Germany TYPE    C 30 U Dynamic YEAR    2011 SPECIFICATIONS X - Travel   650 mm Y - Travel   600 mm Z - Travel   500 mm Controll  Siemens 840D Table Length x Width   630 mm Table load in kG   800 Kg Spindle Taper   HSK 63 Spindle speeds / ranges   28000 Rpm ATC tool changer   75 ( 32 + 43) Coolant true spindle / Bar   40 Bar Number off controlled axis   5 DIMENSIONS Length   4200 mm Width    3000 mm Height   3200 mm  

- CE certification - Complete, original wood Her machine documents and operating instructions - Weight: 720 kg (basic machine), approx. 860 kg (machine with aggregates) Assembly: • Control panel (1888) SK 180 • Fully automatic edge feeding (1903) - Edge thickness striped goods 0.3 - 8 mm - Edge thickness rolled goods 0.3 - 3 mm - max edge height 51 mm • Adhesive application station (1906 M) - with hot melt adhesive cartridge - via sword nozzle with electro-pneumatic control - Temperature selector - Heating time approx. 5 min - Temperature approx. 190 - 240 degrees Celsius - Workpiece thickness 6 - 45 mm • Printing Unit (1912) • Cross-cut unit (1918) • Combino milling unit (1942 M) - for flushing, chamfering and radius milling • Pull blade unit (1929) - Edge thickness max. 3mm • Sandbar unit (1940) • 2 x suction connections 70 mm each • Compre ...

Used Heuft Empty Bottle Inspector InLine IXs reflexx Device No. 2ZG044698 Condition: very good, ready for use at short notice ·       Commissioning 6 May 2012 ·       Upgrade for later integration of additional ground control using X-ray technology ·       Tape control Heuft Synchronous TX ·       Network Heuft Hlan ·       Haylofts two ways discharge with div. Heuft container transport Convejor ·       Troubleshooting Software Wizard ·       Software assistant guided instructions for the different container changes ·       Power max. 46,000 fl./h ·       5 Variety licenses incl. scope of delivery: ·       Belt control Spectrum TX ·       Measuring bridges for inlet control and discharges incl. height connections ·       2 x Discharge Delta K  ...

Used Heuft Glass Empty Bottle Inspector InLine reflexx Device No. 2ZG042943 Condition: very good, ready for use at short notice ·       Original delivery date 12.2011 ·       Power max. 46,000 fl./h ·       Pass direction from left to right ·       Two triggers ·       Secomak blower instead of compressed air ·       Transponder detection for RFID test bottles ·       Discharge monitoring ·       Network Heuft Hlan (Upgrade Optional) ·       Hayt two ways discharge Delta K to the right ·       4 Variety Licenses ·       Tripartite Delta K for band height of 1130 ·       Two fluids for lye detection Not available! ·       inlet control, must be supplemented if necessary ·       Thread edging, must be supplemented if required ·       The documentation is complet ...

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

Hercules metal press Machine Package size: 20 x 35 x material quantity Drive: 7.5 KW Weight: 2100 kg

Heuft oven control panel 4D1166.00-K14 Rev. E0