133,982 used machines on RESALE, but how to find them? Machine Search
Key data: 2500 KW, 10500 V
FOR SALE: Caterpillar G3520H Gas Generator Set (2013) Zero Hours Since Major Overhaul | 2,500 kW Continuous Power Output Maximize operational efficiency and reliability with this prime power, high-capacity industrial generator. This natural gas-powered genset delivers continuous-duty performance and is ideally suited for mission-critical infrastructure, distributed energy systems, and onsite power generation. Technical Specifications: Engine Model: Caterpillar G3520H Generator Set S/N: GFP00117 Manufacture Year: 2013 Power Rating: 2,500 kW / 3,125 kVA (Base Load / Baseload Applications) Fuel Type: Natural Gas Rated Voltage: 10,500 V Frequency: 50 Hz Power Factor: 0.8 (Lagging) RPM: 1500 Rated Current: 172 A Phase Configuration: 3-Phase Connection Type: Wye (Star) Insulation Class: F Excitation Voltage / Current: 50 V / 4.3 A Cooling Sy ...
A total of five Datz aluminum MCA capping heads are available for the VSO and VA series, but can also be used universally. One of the heads needs to be readjusted, the rest are ready for use. On-site inspection is possible.
The multihead weigher was briefly used for mozzarella, includes basic module, power supply, distributor drive, dosing chute, storage container, weighing container, chute set, hopper, operating unit, holder, accessory set, feed hopper, collecting container and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine has been used very little.
A 3-needle hem sewing machine with trimming device (high-speed cylinder bed coverstitch machine with integrated thread trimmer and trimming device) Juki is available. Stitch type: triple coverstitch, needle gauge: 5.6mm, sewing speed: 6000 stitches/min, table top dimensions X/Y: 1060mm/600mm, needle: UY128GAS 9S-14S, stitch length range: 0.9mm/4.5mm, control: SC921B, control panel: CP18B. Documentation available. On-site inspection is possible.
Includes (1) 12x upright 2C815-80x50, 1825mm, RAL-2001 red orange, max. load per pair: 2.26t (2) 352x upright 2X1115-110x50, 2700mm, RAL-2001 red orange, max. load per pair: 3.0t (3) 78x shelf frame M80 5500x1100mm, RAL-5003 sapphire blue, already dismantled, on-site inspection is possible.
Heat exchanger NIKO Capacity: approx. 10.000 bottles/h Bottle types: 0,2 l and 1,0 l Completely stainless steel Welded in one piece Length: approx. 8 m, width: 2,60 m
Key data: 48 KW, 60 kVA
Number 007 Generator sets Type: K0363 Engine Iveco Generator LeRoy Somer Power: 60 KVA / 48 KW Hz 50 RPM 1500 IP 21 AVR controller RS 437 Year of manufacture 1989 Hours 237 Accessories: Control cabinet Metrics: L: 2.25m H: 1.50m B: 0.70m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
turning diameter: 400 mm slide adjustment: 62 mm tool adaptor: MK 4 tool taper: Ø 18 mm weight: 8,0 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 28 kVA
Dismantled and stored induction hardening system from Steremat Elektrowärme GmbH type EA 15DA-2C-HF turntable with 50 magnetic workpiece holders and a manual workstation, generator from ELDEC type: HFG 15 DA, HF power 15KW, power consumption at full load 18 KVA, frequency range 150 - 350 kHZ
Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW
Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible.
Manufacturer: Bitzer Model: 2JES-07Y-40S Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 400V / 3Ph / 50Hz Shipping Weight: 50 kg Net Weight: 43 kg Compressor Details: • Type: Semi-Hermetic Piston Compressor • Series: CE1 • Number of Cylinders: 2 Ncebjwudyqemy Ex Ipou • Flow Volume: 5.21 m³/h • Compression Type: Piston • Oil Type: BSE32 (BSE55 for R134a, R450A, R513A, R1234yf if tc > 70°C) • Oil Charge: 1.0 L Electrical Data: • Starting Current (LRA): 14.8 A • Max Operating Current: 3.7 A • Max Power Consumption: 1.9 kW Refrigerant Compatibility: R134a, R450A, R513A, R1234yf, R404A/R507A, R448A/R449A, R454C, R455A, R407F Pipe Connections: • Suction Line: 16.0 mm (5/8") • Pressure Line: 12.0 mm (1/2") Sound Power Level: 63.0 dB(A) at +5°C / 50°C Dimensions: • Width: 220 mm • Height: ...
New DWM Copeland D2DC3-50X-AWM Semi-Hermetic Compressor – 16.8 m³/h – 380V – 28 bar Manufacturer: DWM Copeland Model: D2DC3-50X-AWM Nobmswudz Ijy Ex Ipecu Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 380–420V (Y) / 3 Phase Power Consumption: 9 A Flow Rate: 16.8 m³/h Maximum Pressure: 28 bar Transport Weight: 158 kg
Stock number: A217, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger , Standing: 4 pcs. legs, Motor: 2,2 kW, Total height: 2600 mm., Connections: 4 pcs Ø 2, Manufacturer: APV
Stock number: F1097, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Conveyor: W 82 x L 3650 mm., Filling heads: 4 pcs. Ø 10 mm., Manufacturer: Hero de Groot NV
Stock number: A216, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger , Standing: 4 pcs. legs, Motor: 2,2 kW - 380 Volt, Total height: 2150 mm., Connections: 4 pcs Ø 2, Manufacturer: APV, Model/type: VT 460, Year: 2000
Stock number: SD069, Dimensions: L 439 x W 385 x H 284 mm., In stock: Yes, Item: Centrifuge, Amount in stock: 1 pc., Motor: 140 W - 220 Volt - 6000 rpm. Variable speed., Manufacturer: Hettich Universal 16A, Model/type: 1601, Year: 1998, Other: Table model, for test tubes or similar.
Stock number: A212, Tube heat exchanger, stainless steel,, insulated., 27 pc Ø 1 product pipe,, 4 m² heating surface., Material: Stainless steel AISI 304
Stock number: A144, Scrabed surface heat exchanger, stainless steel,, Brogli model Agitemp., 9,2 kW gear motor., 212 rpm., Ø 1 connections., Material: Stainless steel AISI 304
Stock number: A051, Scraped heat-exchanger, stainless steel,, Gerstenberg & Agger,, type Labo Perfektor 1x57 B/L,, 4 zones., Material: Stainless steel AISI 304
Stock number: A052, Set of scraped surface heat exchangers, stainless steel,, APV type SSHE 2HD 672 1991., Double tube 2 x Ø 160 x L 1500 mm., Horizontal lying in stainless steel cabinet., 5,5 kW gear motors, 148 rpm, 220/380 V., Material: Stainless steel AISI 304
Stock number: A050, Scraped heat-exchanger, stainless steel,, Votator type 1C 624 L,, 2 zones., 3 HK motor, adjustable speed, 160 - 640 r/min., Material: Stainless steel AISI 304
Stock number: A202, Tube heat exchanger, stainless steel,, lying on legs., Ø 1 product tubes,, in total approx. 20m2 heat surface., Material: Stainless steel AISI 304
Stock number: A208, Tube heat exchanger, stainless steel,, 60 pcs. Ø 20 x L 2450 mm. tubes., Estimated 9,23 m2 heating surface,, outer dimensions Ø 350 x L 2700 mm., Material: Stainless steel AISI 304
Stock number: A203, Tube heat exchanger, stainless steel,, 36 pcs. Ø 20 x L 3000 mm. tubes., Approx. 6,78 m2 heating area,, outer dimensions D 375 x L 3050 mm., Material: Stainless steel AISI 304
Stock number: A205, Tube heat exchanger, stainless steel,, approx. Ø 30 mm. spiral tube., Outer dimensions D 260 x L 2810 mm., Material: Stainless steel AISI 304
Stock number: A198, Tube heat exchanger, stainless steel,, insulated, outside rivet cladding., 20,4 m2 heating surface,, calculation pressure 8 baro., D 500 x L 4450 mm. total., Material: Stainless steel AISI 304
Stock number: A201, Tube heat exchanger, stainless steel,, Spiraflo type Monotube 2/2,5-30., Ø 2 x L 3000 mm., Material: Stainless steel AISI 304
Stock number: A061, Tube heat exchanger, stainless steel,, containing:, 16 tubes, L 1900 mm each., 1 core heating/cooling., 1½ product tube., 2 double jacket, heating/cooling., 1 tube, L 1900 mm., 1½ product tube., 2 double jacket, heating/cooling., Total area 6,0 m2., Material: Stainless steel AISI 304
Stock number: A185, Tube heat exchanger, stainless steel,, OY Sanatasalo Sohlberg AB., Material: Stainless steel AISI 304
Stock number: A010, Tube heat exchanger, stainless steel,, Pasilac type RDF., Standing on legs i stainless cabinet., Ø 12 x 25000 mm product tube., Material: Stainless steel AISI 304
180 litre, Stock number: D987, Litre: 180, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 600 x D 500 x H 600 mm., Outer dimensions: W 770 x D 650 x H 980 mm., Temperature: Max 30-70° C , Power: 220 Volt, Shelf: 2 pc., Manufacturer: Heraeus, Model/type: BA3, Other: Double door
44 litre, Stock number: D986, Litre: 44, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 450 x D 320 x H 315 mm., Outer dimensions: W 650 x D 490 x H 460 mm., Temperature: 3 heat stages. , Power: 220 Volt - 140 W., Shelf: 2 pcs, Manufacturer: Helios, Model/type: 28311
109 litre, Stock number: D934, Litre: 109, In stock: Yes, Amount in stock: 1 pc., Item: Gas Incubator, Inner dimensions: W 425 x H 520 x D 500 mm., Temperature: 0-55º C, Power: 230 Volt, Shelf: 3 pcs., Manufacturer: Heraeus, Model/type: BB16, Other: Inside copper cladding
109 litre, Stock number: D935, Litre: 109, In stock: Yes, Amount in stock: 1 pc., Item: Gas Incubator, Inner dimensions: W 425 x H 520 x D 500 mm., Temperature: 0-55º C, Power: 0,6 kW - 230 Volt, Shelf: 3 pcs., Manufacturer: Heraeus, Model/type: BB 16 CU, Other: Double glass door and inside copper cladding.
50 litre, Stock number: D807, Litre: 50, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum drying cabinet, Inner dimensions: Ø 350 x L 520 mm., Temperature: 50-200° C, Power: Thermostat control, Shelf: 1 pc., Manufacturer: Heraeus, Model/type: RVT 360
11 litre, Stock number: D616, Litre: 11, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum oven, Inner dimensions: Ø 220 x L 290 mm., Temperature: Max 180º C, Power: 0,5 kW - 220 Volt, Shelf: 1 pc., Manufacturer: Heraeus, Model/type: RVT 220, Other: Controlled by thermostat and excl. vacuum pump.
Stock number: D527, Spray dryer nozzle head, stainless steel., Pasch Silkeborg TCR P2052 - 1984., Material: Stainless steel AISI 304
Stock number: D526, Spray dryer nozzle head, stainless steel., Pasch Silkeborg TCR P2052 - 1972., Material: Stainless steel AISI 304
Stock number: SD064, HF filter centrifuge, stainless acid proof steel,, Heinkel type HF600., Standing on a leg frame,, separate electric cabinet., Filter area 0,45 m²,, capacity 52 l., For separation of dry matter/liquid., Material: Stainless acid proof steel AISI 316
Stock number: PJ234, Impeller pump head, stainless steel,, 1½, Jabsco model 28400 - 7015., Material: Stainless steel AISI 304
Stock number: PT4005, Lobe pump, stainless acid proof steel,, SSP model S6-0353-H7., Mounted with rubber lobes,, by-pass function., Excluding motor and foundation., Material: Stainless acid proof steel AISI 316
Stock number: PT3015, Lobe pump head, stainless steel,, SSP 300 ND., Ø 3,, displacement 0,93 l/rpm., Material: Stainless steel AISI 304
Stock number: PT2051, Lobe pump head, stainless acid proof steel,, Alfa Laval type LKP-L 4055., Max 10 bar,, horizontal passage., Ø 2 connections,, flushed shaft seals., Displacement 0,554 l/rotation., Material: Stainless acid proof steel AISI 316
Stock number: PT2037, Lobe pump head, stainless steel,, INOXPA type SLR2-50/06-2., Horizontal flow., Displacement 0,3008 l/rev., Material: Stainless steel AISI 304
Stock number: PT2039, Lobe pump head, stainless acid proof steel., Ibex type 1120 HA., Horizontal flow., Ø 2 connections., Displacement 0,3 l/rev., Material: Stainless acid proof steel AISI 316
Stock number: PT2030, Lobe pump head, stainless steel,, Willi F. Grassel type 200 NDA,, double jacket Pump house., Horizontal flow., Material: Stainless steel AISI 304
Stock number: PT2033, Lobe pump head, stainless acid proof steel,, SSP type S3-0038-V07., Vertical passage., Ø 2 connections., Displacement 0,384 l/rev., Material: Stainless acid proof steel AISI 316
Stock number: PT2028, Lobe pump head, stainless acid proof steel,, bex Type NMOG 1120 A., Horizontal flow., Displacement 0,3 l/rev., Material: Stainless acid proof steel AISI 316
Stock number: PT1526, Lobe pump head, stainless steel,, Waukesha Type IMC 440., Overpressure valve., Horizontal flow., Ø 1½ connections., Capacity 0,18 l/rev., Material: Stainless steel AISI 304
maximum number of results exceeded
please refine your search
