he used for sale

General SKU309N516 MakeFalk Apparate- und Rohrleitungsbau gmbh&co KG No.3305 Year of construction2007 Mounted on legscheck Material Shell materialMild steel Tube materialStainless steel 1.4462 (318LN) Pressure Working pressure shell4 Bar Working pressure tubes1 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface49 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodytuv Heating surface49 m2 Tube capacity262 ltr Number of tubes:76 Tube diameter25mm Tube length3900mm Wall thickness tubes2,0mm Max. temperature165 gr.C. Shell capacity503 ltr Shell diameter508mm Shell length4070mm Wall thickness shell6,3mm Max. temperature165 gr.C. Shell connectionsDN65, DN40 Cover connections(2x) DN100 Capacity3,9 m3 Information LocationBarneveld Floorspace5,0x0,8 M Total height1,4 M Weig ...

x-travel:1000 mm y-travel:800 mm z-travel:1100 mm weight of the machine ca.:15,2 t Tool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/min size of pallet:630x800 mm change time of pallets:21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

General SKU071F418 MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5913 Year of construction1986 LocationBarneveld Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechno ...

x-travel:450 mm y-travel:450 mm z-travel:450 mm weight of the machine ca.:14 t size of pallet:320 x 320 mm number of spindles:2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 ba ...

General SKUR0873 MakeJaeggi Guentner AG (CH) LocationBarneveld Type36,2 m2 Pressure Working pressure shell6 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface36.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface36.2 m2 Tube capacity164 ltr U-typecheck Number of tubes:120 Tube diameter16 Tube length3300 mm Wall thickness tubes1mm Max. temperature-30/200 Degr.C Shell capacity206 ltr Shell diameter406,4 mm Shell length2964 mm Wall thickness shell4 mm Max. temperature-30/200 Degr.C Shell connectionsDN656 (2x), DN15 (1x) Cover connectionsDN100 (2x) MaterialStainless steel 1.4435 (316L) Information No.2613 Year of construction1996 Mounted on legscheck Floorspace3,7x0,6 m Total height1,3 m Weight750 kg Catalysts & fillersShell and tube ...

turning diameter over bed:350 mm turning diameter over slide rest:240 mm turning length:800 mm Spindle RPM:40 - 2000 in 8 Stufen 1/min total power requirement:3 kW Spindle bore:26 mm tailstock quill taper MT:MK 2 dimensions of the machine ca.:1,5 x 1,0 x 1,6 m weight of the machine ca.:1,9 t Very well maintened center lathe with accessories - 3-jaw, 4-jaw chuck - tailstock with center - 1 boring head - RAPID quick tool change device with 3 holder - saddle mounted steady rest - collant device - set of collets appr. 75% size B 32

General SKU279T633 MakeINNEX APL Apparatebau TypeBEU 457/3400-2 No.H3660 A12-1153-1 Year of construction2013 Mounted on framecheck Pressure Working pressure shell10 Bar Working pressure tubes10 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Surface65 m2 Specified Features - Shell and tube heat exchanger MaterialMild steel 1.0345 (P235GH) Heat exchangercheck Heating surface65 m² Tube capacity160 Ltr. U-typecheck Number of tubes:512 Tube diameter12,3 mm Tube length3500 mm Max. temperature-0 °C/340 °C Shell capacity325 Ltr. Shell diameter480 mm Max. temperature-0 °C/340 °C Shell connections2x dia.80mm Cover connections2x dia.80mm Information LocationBarneveld Floorspace4x0,7 m Total height1,4 m Weight1700 kg CEcheckCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmac ...

x-travel:800/945 mm y-travel:800 mm z-travel:600 mm spindle motor:27 kW spindle turning speed range:10 - 8000 U/min spindle taper ISO:40 c-axis:360.000 x 0,001 table load capacity:600 kg table clamping surface::800 630 mm total power requirement:55 kW weight of the machine ca.:16 t Machine with Heidenhain iTNC 530 CNC control for 5 axis - pendulum operation with turn- swivil table left and fixed table right - tool changer for 30 tools - coolant device, chip conveyor - complete splash housing

General SKU330N520 LocationBarneveld MakeGesellschaft fuer Oeltechnik mbH Waghäusel TypeE-302B No.106/1545/86 Material Shell materialStainless steel 1.4541 (321) Tube materialStainless steel Pressure Working pressure shell13 Bar Working pressure tubes13 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11.1 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface11,1 m2 Tube capacity58 Ltr U-typecheck Number of tubes:31 Tube diameter16mm Tube length+/- (2x)3000mm Max. temperature-20 / 200 Degr.C Shell capacity100 Ltr Max. temperature-20 / 75 Degr.C. Shell connections(2x) dia.50mm, (2x) dia.25mm Cover connections(2x) dia.100.. Information Year of construction1986 Floorspace3,7x0,7 MCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other ...

Parameter Value Model Name Herkules 450/10/50 Type Piston Air Compressor Tank Capacity 50 litres Max. Operating Pressure 10 bar Motor Power 2.2 kW / ~3 HP Voltage 230 V AC Frequency 50 Hz Engine Speed 2800 rpm Air Intake Capacity 400 L/min Air Delivery (Effective) 320 L/min Noise Level 95?97 dB Number of Cylinders 2 (twin cylinder) Lubrication Oil-lubricated system Typical Uses Home workshop, tire inflation, air tools, painting

travel -x axis:800/1825 mm travel -y axis:800/460 mm travel -z axis:600 mm Feeding X,Y,Z up to:0 - 40/40/40 mm/min. swival range +/-:+10 bis -90 x 360 Grad Rotary-table:800 x 630 mm number of T-slots:5 T-slot - distance:125 mm T-Slots:18 mm center hole:30H7X15 mm swival range +/-:90 Grad turning speed:20 m/min. Number of axles:3-7 St. Spindle RPM:12.000 1/min max. tool weight:10 kg max. tool length:330 mm diameter of tools max.:80 mm tool changing time:4 sec CNC control with 15.1" color flat-screen 19" machine control panel PCU 50 with Intel Pentium II Windows XP 10.0 GB hard drive

General SKUR0891 MakeLe Carbone-Lorraine AG (FRA) LocationBarneveld TypePolyblock NF610G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Graphilor XBS Heat exchangercheck Verticalcheck Heating surface16.3 m2 Tube capacity80 Ltr Max. temperature165 degr.C. Shell capacity90 Ltr Shell diameter662mm Shell length1370mm Max. temperature165 degr.C. Shell connections2x DN150 Cover connections2x DN200 Capacity93.8 ltr. Information No.17474 Year of construction1996 Floorspace0,9x0,9 M Total height1,8 M Weight1500 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDai ...

x-travel:1190 mm total power requirement:25 kW feeds::3 - 2000 mm/min weight of the machine ca.:4,3 t table-size:1600 x 400, 5 Spannbacken mm dimensions of the machine ca.:4000 x 3600 x 2200 mm speeds:45 - 1800 U/min y-travel:530 mm z-travel:540 mm tool taper:ISO 50 control cabinet:940 kg

x-travel:500 mm y-travel:250 mm z-travel:325 mm table-size:400 x 200 mm T-slots:10/ 20 mm T-slots:4 St workpiece height max.:300 mm template table:380 x 380 mm speeds::2500 - 20000 U/min no. of turning speeds:3 total power requirement:0,25 kW weight of the machine ca.:430 kg dimensions of the machine ca.:1000 x 1200 x 1500 mm

General SKU050C389 Makeunknown, manufacturer tag is missing LocationBarneveld Material Shell materialStainless steel 1.4401 (316) Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface1.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface± 1,5 m2 Number of tubes:25 Tube diameter24mm Tube length± 900mm Information Floorspace2,2x0,7 MCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, herbs & coffeeOintmentsGene ...

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

x-travel:2500 mm y-travel:1000 mm z-travel:750 mm table surface area:3220 x 1000 mm Workpiece weight approx.:3000 kg spindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/min feed speeds:1- 30000 mm/min rapid traverse:30 m/min total power requirement:40 kW dimensions of the machine ca.:6,9 x 4,1 x 3,7 m weight of the machine ca.:21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders

General SKU345S652 MakeG.A.B. Neumann GmbH (DE) TypeH-B-6,4 No.10927-8692 Year of construction1991 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface4.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Horizontalcheck Heating surface4,8 m2 Tube capacity17 Ltr Max. temperature-10/165 degr.C. Shell capacity18 Ltr Max. temperature-10/60 degr.C. Shell connectionsDN100, DN80, DN40 Cover connections(2x) DN50 Information Floorspace0,6x0,6 m Total height1,35 m Weight460 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedO ...

General SKU280P436 MakeCL -THW No.2405 Year of construction1984 Mounted on legscheck Pressure Working pressure shell16.6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface11m2 Tube capacity145 Ltr U-typecheck Number of tubes:50 Tube diameter16mm Tube length(2x) 1920mm Shell capacity314 Ltr Shell diameter+/- 510mm Shell connections(2x)dia.70mm, dia.80mm, (2x)dia..60mm, Cover connections(2x)dia.80mm Information LocationBarneveld Floorspace2,5x0,8 M Total height1,6 M Weight800 KG Extra SpecificationsMin.Temp -35 degr.C. Catalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOr ...

x-travel:2200 mm y-travel:2200 mm z-travel:1400 mm spindle taper ISO:50 spindle diameter in front bearing:110 mm spindle turning speed range:45 - 6000 U/min pallet table size:1000 x 1250 mm pallet worktable capacity:6000 kg feed range:1 - 60000 rapid traverse:60 m/min spindle drive motor:27 kW dimensions of the machine ca.:15 x 8,5 x 5,7 m total power requirement:133 kVA weight of the machine ca.:50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm

General SKU274P408 LocationBarneveld MakeHellmich Behälter- und Apparatebau (DE) No.4973 Pressure Working pressure6 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume10500 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4541 (321) Stainless Steel Reactors Reactorcheck Capacity13300 Ltr (netto ±10.500 Ltr.) Vessel sizesdia.2300mm x2700mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(8x)dia.80mm, (3x)dia.50mm, dia.100mm Outletdia.100mm Half coil jacketed(488 Ltr) Max. temperature120°C. With paddle stirrertype FGRLR-80D Motor15 KW, 290/500 Volt Speed mixing shaft59 rpm Information Year of construction1998 Mounted on legscheck Floorspace2,6x2,6 m Total height5,5 m Weight6000 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceu ...

x-travel:630 mm y-travel:630 mm z-travel:630 mm pallet size::400 x 500 mm spindle taper::HSK 63 spindle turning speed - stepless:10 - 16000 U/min total power requirement:55 kW weight of the machine ca.:11 t Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping

pressure:015 t throat:200 mm stroke:4 - 70 mm no. of strokes:140 /min distance table/ram, max. stroke up, adjustment up:310 mm table surface area:430 x 395 mm hole in the table:165 x 160 mm table height over floor:560 - 735 mm table adjustable:175 mm ram surface:160 x 130 mm ram adjustment:80 mm power requirement:1,2 kW weight:0,9 t Dimensions (WxDxH):1,0 x 1,25 x 1,8 m clutch:Drehkeil overload protection in ram:mechanical

General SKU050C531 MakeBarriquand Echangeurs Roanne, France TypePlatular IXA SP 2x5+6 / 3x5x160x1500 No.23297 D7 Year of construction1991 LocationBarneveld Material Shell materialMild steel Tube materialStainless steel Pressure Working pressure shell8 Bar Working pressure tubes8 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface5.3 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface5,3 m2 Tube capacity15,8 Ltr Max. temperature200 Degr. C. Shell capacity35 Ltr Information Floorspace2,2x0,7 M Total height0,6 M Weight440 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigment ...

pressure:100 t throat:350 mm stroke:6 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:850 x 700 mm hole in the table:470 x 150 mm table height over floor:855 mm ram surface:450 x 300 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,0 t dimensions (WxDxH):1,5 x 2,3 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

pressure:035 t throat:225 mm stroke:8 - 100 mm no. of strokes:110 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:580 x 460 mm hole in the table:250 x 150 mm table height over floor:700 mm table adjustable:230 mm ram surface:355 x 120 mm ram adjustment:70 mm power requirement:2,2 kW weight:1,5 t dimensions (WxDxH):1,0 x 1,5 x 2,05 m clutch:rolling key overload protection in ram:mechanical

General SKU071F416 MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5967 Year of construction1986 LocationBarneveld Material Tube materialStainless steel Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 M Weight150 kgCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharm ...

pressure:100 t distance between columns:1000 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:650 mm table surface area:980 x 700 mm pressure of drawing cushion in table:4 x 10 / 1 x 20 t stroke of drawing cushion in table:180 mm table height over floor:800 mm side window:400 mm ram surface:1000 x 700 mm speed down:500 mm/s speed up:450 mm/s working speed:60 mm/s power requirement:40,0 kW dimensions (WxDxH):1,5 x 1,4 x 4,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:4 x 10 t + 1 x 20 t, getrennt einschaltbar foundation pit:nicht erforderlich

General SKU309N517 LocationBarneveld MakeFalk Gmbh & Co KG Bendorf No.3301 Pressure Working pressure shell2.5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Surface81.3 m2 Specified Features - Shell and tube heat exchanger MaterialMild steel Heat exchangercheck Heating surface81,3 m2 Tube capacity525 Ltr Number of tubes:126 Tube diameter25mm Tube length3900mm Max. temperature100 gr.C. Shell capacity1140 Ltr Shell connections(2x( dia.150mm Cover connections(2x) dia.100mm Information Year of construction2007 Floorspace5,5x0,9 M Weight2170 KG Extra SpecificationsThe material of the shell and tubes are 1.0345 (P235GH) Catalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnim ...

pressure:050 t throat:255 mm stroke:8 - 120 mm no. of strokes:115 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:640 x 500 mm hole in the table:250 x 180 mm table height over floor:710 - 930 mm table adjustable:220 mm ram surface:550 x 170 mm ram adjustment:70 mm power requirement:4,0 kW weight:3,1 t dimensions (WxDxH):1,5 x 1,5 x 2,3 m

pressure:050 t throat:250 mm stroke:8 - 120 mm no. of strokes:100 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:650 x 515 mm hole in the table:115 mm table height over floor:790 - 1020 mm table adjustable:230 mm ram surface:390 x 180 mm ram adjustment:70 mm power requirement:2,0 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,2 m overload protection in ram:mechanical

General SKUR0854 MakeZürcher AG (CH) LocationBarneveld Type35 m2 Pressure Working pressure shell6 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface35 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 Heat exchangercheck Horizontalcheck Heating surface35 m2 Tube capacity164 ltr U-typecheck Number of tubes:122 Tube diameter16mm Tube lengthca 5400mm Wall thickness tubes1,0mm Max. temperature-30/200 degr.C Shell capacity206 ltr Shell diameter406mm Shell length3312mm Wall thickness shell4mm Max. temperature-30/200 degr. C Shell connectionsDN65 (2x), DN15 (1x) Cover connectionsDN100 (1x), dia. 100mm (1x) Information No.1886 Year of construction2002 Mounted on legscheck Floorspace3,7x0,6 M Total height1,3 M Weight750 KGCatalysts & fillersShell and tube he ...

Pressure:080 t throat:300 mm stroke:8 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:720 x 600 mm hole in the table:300 x 175 mm table height over floor:860 mm ram surface:400 x 270 mm ram adjustment:60 mm power requirement:7,5 kW weight:6,0 t dimensions (WxDxH):1,3 x 2,2 x 3,05 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

General SKUR0366 LocationBarneveld MakeBuss SMS TypeKondensator Pressure Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface41.5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface41,5 m2 Tube capacity175 ltr. U-typecheck Number of tubes:40 Tube diameter20x1,5mm Tube length16500mm Wall thickness tubes1,5 Max. temperature100 degr. C Shell capacity700 ltr. Shell diameterdia. 500mm Shell length4660mm Max. temperature200 degr. C Shell connectionsdia. 400mm (2x) Cover connectionsdia. 100mm (2x) Information No.22.11.6351/4 Year of construction1994 Mounted on legscheck Floorspace5,2x0,7 M Total height1,1 M Weight1200 KgCatalysts & fillersShell and tube ...

pressure:080 t throat:300 mm stroke:7 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:450 mm table surface area:720 x 600 mm hole in the table:300 x 120 mm table height over floor:850 mm ram surface:400 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:6,5 t dimensions (WxDxH):1,2 x 2,0 x 2,9 m German Safety: permitted for manual loading:CE-sign light guard:Sick clutch:hydraulic overload protection in ram:hydraulic ram adjustment:motoric stroke adjustment:automatic

General SKU235P244 LocationBarneveld MakeBuss AG (CH) No.6821 Pressure Vacuum possiblecheck Working pressure shell110 Bar Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface2.6 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface2.6 m2 Tube capacity20 Ltr Number of tubes:18x Tube diameter13mm Tube length3600mm Max. temperature200 Degr.C Shell capacity80 Ltr Shell diameterdia.200mm Shell length3600mm Max. temperature200 Degr.C Shell connections(3x)40mm Cover connections(2x)40mm MaterialMild steel, Stainless steel 1.4439 (317LMN) Information Year of construction1985 Mounted on legscheck Floorspace4,1x0,5 M Total height0,7M Weight500 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSol ...

pressure:160 t throat:690 mm stroke:8 - 180 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1000 mm hole in the table:400 / 120 mm table height over floor:850 mm passage to the back:900 mm ram surface:1000 x 700 mm ram adjustment:130 mm power requirement:11,0 kW weight:19,0 t dimensions (WxDxH):2,4 x 2,8 x 3,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

General SKU309N518 MakeEbner Anlagen und Aparate Germany No.062404700 Year of construction2007 Mounted on legscheck Material Shell materialStainless steel 1.4462 (318LN) Cover materialStainless steel 1.4462 (318LN) Tube materialStainless steel 1.4462 (318LN) Pressure Vacuum possiblecheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface120 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface120 m2 Tube capacity820 Ltr Number of tubes:334 Tube diameter25,0mm Tube length5000mm Wall thickness tubes1,0mm Max. temperature10-100 gr.C, Shell capacity1600 Ltr Shell diameter750mm Shell length5000mm Wall thickness shell4,0mm Max. temperature10-120 gr.C Shell conne ...

Pressure:080 t throat:300 mm stroke:8 - 140 mm no. of strokes:60 / 90 /min distance table/ram, max. stroke up, adjustment up:420 mm table surface area:800 x 600 mm hole in the table:330 x 230 mm table adjustable:230 mm table height over floor:750 - 980 mm ram surface:600 x 240 mm ram adjustment:100 mm power capacity:4,5 / 6,9 kW Weight:5,5 t Dimensions (WxDxH):1,4 x 2,5 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:hydraulic

General SKUR0880 MakeApaco AG (CH) LocationBarneveld TypeAW300-2000/20-98 Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface12 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Verticalcheck Heating surface12 m2 Tube capacity95 ltr. Max. temperature165 degr.C. Shell capacity110 ltr. Shell diameter323,9mm Shell length2700mm Wall thickness shell3,2mm Max. temperature100 degr.C. Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 (1x) Information No.503531/1 Year of construction1985 Floorspace0,7x0,7 M Total height2,8 M Weight350 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceutics ...

Pressure:035 t throat:225 mm stroke:8 - 100 mm no. of strokes:130 /min distance table/ram, max. stroke up, adjustment up:370 mm table surface area:580 x 450 mm hole in the table:210 x 170 mm table height over floor:700 mm ram surface:350 x 180 mm ram adjustment:70 mm power requirement:2,2 kW weight:2,2 t dimensions (WxDxH):1,0 x 1,8 x 2,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical

: neu : 2026 : 080186 : prompt, Zwischenverkauf v : Türkei : 81476 € : 1309.77 € : 1 : 69300 € : 135 to : 3050 mm : Y1 / Y2 / X und RAchse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 120 mm/s : 500 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 150 l : 15 kW : 4250 mm : 1700 mm : 2850 mm : 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and  ...

: neu : 2026 : 070168 : prompt, Zwischenverkauf v : Türkei : 10900 € : 209.28 € : 1 : 150 to : horizontal verschiebbar : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2480 mm : 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 7280 : prompt, Zwischenverkauf v : Türkei : 15700 € : 1 : 100 to : 1000 mm : 300 mm : 7.5 kW : 2110 mm : 1000 mm : 2275 mm : 1900 kg : 1 : 680 mm : 1020 mm : 5 mm/s : 10 mm/s : 6 mm : 100 mm : 190 mm demo machine / mint condition net price (price for new machine € 19.550,00) 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 € : 1510.11 € : 130 to : 1000 mm : 640 mm : 210 mm : 5 - 110 mm : 60 1/min : 630x400 mm : 90 mm : 330 mm : 11 kW : 2200 mm : 1372 mm : 3000 mm : 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 € : 129.31 € : 1550 mm : 2 mm : 90 mm : 6 m/min : 1.5 kW : 2130 mm : 700 mm : 1200 mm : 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 € : 1413.72 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.