he used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 20400 € : 391.68 € : 80 mm : 245 mm : 3 : 4 kW : 6 m/min : 100x20 mm / 2000 mm, 80x2 : 125x25 mm / 600 mm, 60x5 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 500 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.300 mm, 25 : 80x80x8 mm / 800 mm, 30x3 : 70x70x7 mm / 700 mm, 30x3 : UPN 140 / 1600 mm, UPN 12 : UPN 140 / 1.600 mm, UPN 1 : IPN 120 / 600 mm, IPN 80 : 1450 mm : 1000 mm : 1400 mm : 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 48100 € : 918.71 € : 2550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4900 mm : 1150 mm : 1250 mm : 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 € : 1056.51 € : 3100 mm : 9 mm : 8 mm : 7 mm : 7 mm : 5 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1470 mm : 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112813 € : 2132.17 € : 320 to : 3050 mm : Y1 / Y2 / X Achse : 365 mm : 2600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 37 kW : 4300 mm : 1820 mm : 3330 mm : 17100 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48500 € : 926.35 € : 60 to : 3.5 mm : 500 mm : 700 mm : 190 mm : 1 - 100 mm : 65 1/min : 4 : 70 mm : 45 mm : 260 mm : 340 mm : 5.5 kW : 1250 mm : 1350 mm : 2400 mm : 3500 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Automatic central lubrication Equipment in accordance with CE regulations OPTIONS: vibrations pads bolster plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51600 € : 975.24 € : 3080 mm : 6 mm : 4 mm : 350 mm : 20 1/min : 0.5 - 2 ° : 16 : 20 to : 1000 mm : 200 mm/s : 11 kW : 125 l : 3 Stk. : 820 mm : 494 mm : 3280 mm : 4100 mm : 2050 mm : 3650 mm : 1950 mm : 7980 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 3 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 € : 613.11 € : 1 : 3100 mm : 4 mm : 42 1/min : 1,5 ° : 750 mm : 7.5 kW : 2 Stk. : 800 mm : 450 mm : 3700 mm : 2300 mm : 1350 mm : 3730 kg mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 72800 € : 1375.92 € : Doppelsäulenführung : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 2.2 kW : 7.5 kW : 0.12 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping chip conveyer turn table for turning the machine for mitre cutting roller tables and band saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 060216 : Juni 2026, Zwischenverkau : Türkei : 20700 € : 397.44 € : Schwenkrahmen : 5200x34x1,1 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 250 : rund 410 mm, quadrat 410 : rund 320 mm, quadrat 285 : 860 mm : 0.55 kW : 3 kW : 0.12 kW : 2800 mm : 1210 mm : 1870 mm : 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or EN ...

: gebraucht : 2023 : 8285 : prompt, Zwischenverkauf v : Türkei : 33900 € : 1 : 30 to : 1050 mm : 3 (Y1, Y2, X) : 160 mm : 850 mm : 250 mm : 390 mm : hydraulisch : 10 mm/s : 130 mm/s : 495 mm : 250 mm/s : 835 mm : 104 mm : 75 l : 7.5 kW : 2470 mm : 1250 mm : 2245 mm : 3250 kg demo machine / mint condition net price (price for new machine € 41.200,00) Y1, Y2, X - 3 Axis Control Unit - DT 10 Touch screen 2D graphic (Remote Control) Back gauge: motorized &, linear guide &, ballscrew European clamping system European clamping system top tool European style bottom tool holder Support arms with T-Slot Safety side covers (Non CE) World known electrical equipments OPTION: DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) € 2.110,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 € : 530.98 € : 3030 mm : 4 mm : 4 mm : 2 mm : 180 mm : 4 kW : 4600 mm : 1120 mm : 1020 mm : 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080109 : prompt, Zwischenverkauf v : Türkei : 68282 € : 1135.89 € : 1 : 1 : 60100 € : 120 to : 3050 mm : Y1 / Y2 / X und R Achse : 180 mm : 2550 mm : 250 mm : 375 mm : hydraulisch : 100 mm/s : 9 mm/s : 77 mm/s : 620 (mit optionaler R-Ach mm : 250 mm/s : 878 mm : 104 mm : 150 l : 11 kW : 3750 mm : 1230 mm : 2400 mm : 5900 kg 4 axes (Y1, Y2, X and R axes) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlle ...

: neu : 2023 : 9684 : prompt, Zwischenverkauf v : Türkei : 830 € : 1 : 1.2 mm : 100 mm : 140 nm : 7 Stk. : 62 mm : 560 mm : 220 mm : 500 mm : 50 kg 7 tool sets users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 € : 569.18 € : Doppelsäulenführung : 5400x41x1,3 mm : 20-100 m/min : 450 mm : 425 mm : 695 x 425 mm : rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm : 0.55 kW : 4 kW : 0.12 kW : 3090 mm : 1200 mm : 1940 mm : 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8200 € : 158.26 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 28390 € : 542.25 € : 0.4 - 3 mm : 300 mm : 900 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 € : 1018.71 € : Doppelsäulenführung : 7000x41x1,3 mm : 15 - 120 m/min : 560 mm : 540 mm : 810 x 530 mm : rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm : 1.1 kW : 4 kW : 0.12 kW : 3850 mm : 1700 mm : 2450 mm : 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12900 € : 247.68 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112800 € : 2131.92 € : 220 to : 3050 mm : Y1 / Y2 / X und R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 12 mm/s : 180 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 11 kW : 4250 mm : 1770 mm : 2900 mm : 12250 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces fo ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 114100 € : 2156.49 € : 135 to : 3050 mm : 4 : 320 mm : 3340 mm : 500 mm : servomotorischer Riemenan : 100 mm/s : 10 mm/s : 100 mm/s : 650 mm : 250 mm : 4200 mm : 2200 mm : 2550 mm : 7300 kg servomotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17 - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : fix : 1000 mm : 300 mm : 1020 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 8 mm : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2450 mm : 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 € : 884.33 € : 2050 mm : 11 mm : 11 mm : 9 mm : 9 mm : 7 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty cont ...

HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

Edge banding machine Type: AURIGA 1308 XL Black Edition Manufacturer: Holz-Her Year: 2018 Avaílable: 7/2026 Edge thickness (rolled material): 0.4 – 3 mm Edge thickness (strip material): 0.4 – 8 mm Edge cross-section: max. 6 × 42 mm Edge height: max. 65 mm Workpiece thickness: 8 – 60 mm (with corner copying 12 – 60 mm) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) / min. 180 mm Feed speed: 10 m/min Equipment and control: Edge Control 19 control system with 18.5” touch color display Rotating and tilting control panel at eye level Motorized adjustable pressure bridge Gluing technology – iTronic: Adaptive pressure and glue dosage control Automatic fine-tuning according to material type Optimization of edge thickness and glue type for best results Automation package includes: Glue quantity control Adaptive trimming knif ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11400 € : 218.88 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10800 € : 207.36 € : 35 mm : 137 mm : 137 mm : 3 : 1.1 kW : 7 m/min : 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm : 500 mm : 1250 mm : 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 € : 980.91 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4450 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE M ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 45100 € : 861.41 € : Doppelsäulenführung : 5200x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 610x360 mm : rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm : 1.5 kW : 3 kW : 0.12 kW : 2850 mm : 2250 mm : 1870 mm : 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,-- The data for this ad was created with ModulMWS - the softwa ...

: neu : 2026 : 070152 : prompt, Zwischenverkauf v : Türkei : 4800 € : 1 : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 50 mm : 80 mm : 0.55 kW : 1400 mm : 1200 mm : 1550 mm : 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 70300 € : 1328.67 € : 100 to : 4.5 mm : 700 mm : 1000 mm : 210 mm : 1 - 132 mm : 58 1/min : 6 : 90 mm : 60 mm : 300 mm : 445 mm : 7.5 kW : 1650 mm : 1545 mm : 3011 mm : 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00 The data for this ad was created ...

: neu : 2026 : 070125 : prompt, Zwischenverkauf v : Türkei : 40200 € : 767.82 € : 1 : 40 to : 2.5 mm : 450 mm : 650 mm : 150 mm : 1 - 80 mm : 125 1/min : 4 : 75 mm : 40 mm : 225 mm : 300 mm : 835 mm : 4 kW : 1350 mm : 1370 mm : 2330 mm : 2100 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual rammer adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 30900 € : 590.19 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 570x560 mm : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 500 mm : 1050 mm : 2050 mm : 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16100 € : 309.12 € : 100 to : fix : 300 mm : 680 mm : 1020 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2350 mm : 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 187100 € : 3536.19 € : 400 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3400 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 2 x 11 kW : 5750 mm : 2110 mm : 3450 mm : 27780 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup a ...

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 € : 171.77 € : 1 : 20 to : 185 mm : 200 x 12 mm : 480 x 1060 mm : 200 mm : 80 mm : 10 mm/s : 10 mm/s : 2.2 kW : 930 mm : 1150 mm : 480 mm : 1200 mm : 530 kg Programmable stroke and retraction point Adjustable speed and pressure Manual jog operation and automatic operating mode Holding pins and tools hardened and ground 3 holder pins Bending tool Manual stop 400 mm Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 € : 593.63 € : 0.4 - 3 mm : 400 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 € : 1848.42 € : 160 to : 1100 mm : 700 mm : 210 mm : 23 - 110 mm : 60 1/min : 630x400 mm : 8 : 95 mm : 65 mm : 325 mm : 480 mm : 2400 mm : 1430 mm : 3200 mm : 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 € : 1366.47 € : 40 to : 1250 mm : Y1 / Y2 / X und R Achse : 200 mm : 1050 mm : 250 mm : 440 mm : servomotorischer Spindela : 115 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 1950 mm : 1450 mm : 2650 mm : 3600 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to : 400 mm : 1000x680 mm : 1000x740 mm : 765 mm : 250 mm/s : 10-20 mm/s : 22 kW : 2400 mm : 1525 mm : 3900 mm : 10500 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to : 400 mm : 850x630 mm : 850x640 mm : 685 mm : 250 mm/s : 10-20 mm/s : 11 kW : 2030 mm : 1150 mm : 3565 mm : 7700 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to : 400 mm : 750x570 mm : 750x615 mm : 630 mm : 300 mm/s : 10-25 mm/s : 7.5 kW : 1710 mm : 1150 mm : 3170 mm : 4900 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 71000 € : 1341.9 € : 150 to : 300 mm : 750x500 mm : 1000x700 mm : 500 mm : 10 mm/s : 3,5 mm/s : 22 mm/s : 7.5 kW : 2300 mm : 1400 mm : 2750 mm : 7700 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width 45 cm Year of construction 2008 Automatic Folding Carton Gluer Machine Nonstop friction feeder Pre-crushing device Disc underglue unit KAS Nozzle Gluing Unit with 3 Nozzles Longitudinal seam device Folding floor equipment Equipment for folding and conical boxes Multi-chamber folding cartons Small format equipment for longitudinal seam Wireless, radio-controlled control unit Pressing tape

Bottle level control, Current: up to 1,5 kW/power supply, Voltage: 220/110 V, Frequency: 50/60 Hz, Length: 420 mm, Width: 350 mm, Height: 720 mm

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet