he used for sale

We stock numerous lengths of this type, e.g. 220 / 270 / 320 / 370 / 420 / 470 / 520 / 570 / 620 / 670 / 720 / 770 / 820 / 870 / 920 / 970 / 1020 / 1120 mm and others. All scales are thoroughly cleaned and checked for perfect function before delivery. The prices are – depending on the length – between 290 and 370 EUR. Please ask us for the exact prices. Please note that these are exchange prices.

We stock numerous models and lengths, e.g. 220 / 270 / 320 / 370 / 420 / 470 / 520 / 570 / 620 / 670 / 720 / 770 / 820 / 870 / 920 / 970 / 1020 / 1120 mm and others. The prices are – depending on the length – between 290 and 370 EUR. Please ask us for the exact prices. Please note that these are exchange prices. Prices for refurbished standards are available on request!

travel -x axis: 1.000 mm travel -y axis: 510 mm travel -z axis: 480 mm travel of - x axis (rotary-tilting table): 420 mm travel - x axis (fixed machine table): 450 mm control: HEIDENHAIN iTNC 530 turning speed range: 50 - 12.000 U/min numbers of positions in the tool changer: 20 tool taper: SK40 table surface area: 650 x 510 mm workpiece weight: 300 kg Clamping surface of rotary-tilting table: 420 mm workpiece weight: 200 kg speeds of rotary table: 30 U/min 5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit. With only 9,787 spindle hours, the unit shows low operating time. The machine is in a well-maintained condition and can be inspected at any time under power. A machine video can be provided on requ ...

Key data: 650 mm, 600 mm, 500 mm

For sale is a Hermle 5-axis machining centre type C30 U (5 simultaneous axes). Equipped with the Heidenhain i TNC 530 controller. The travels of the X, Y and Z axes are 650 x 600 x 500 mm. The table diameter is 280 mm. The machine includes various clamping pallets that can be attached to the table. The maximum speed range is between 20 and 18,000 rpm. The spindle holder is HSK-63. In addition to the standard 32-cavity tool magazine, the machine has an expansion to 157 tool positions, bringing the total number of tool positions to 197. Furthermore, the machine is equipped with a Knoll high-pressure system with a maximum pressure of 40 bar including a fine filter system. A chip conveyor with rear discharge is also available. At the front of the machine is a robotic loading system with a significant number of pallet spaces (depending on the pallet size). This system is connected to the mach ...

Perfecting 2:0/1:1 Autoplate (semi automatic plate loader) Alcolor continuous dampening Impression-cylinder washing device - automatic (Tandem) Ink-roller washing device - automatic Blanket washing device - automatic Preset Plus feeder Prinect Press Center StaticStar - Antistatic device (Compact) CombiStar - Dampening solution conditioning + ink unit temperature control (Compact) AirStar - Central air supply cabinet CleanStar - powder suction PowderStar - powder sprayer (AP 262)

- Full enclosure with vacuum extraction - Roller shutter door for crane loading - Pick-Up station for 3 angled milling head  - Face machining possible to generously sized areas - Distance spil to table 140 - 740 mm - Pendel screen for splitted manufacturing - Coolant tank filtration 350 Liter - HR410 Handwheel HeidenHain - Double LTA Oil Mist  -  Flexible, high-precision machining of large and complex parts, with reliable German build quality.

CONTROLS   PLC Press tool size Total weight max. 9,000 kg Weight of upper part of tool max. 4,500 kg Dimensions max width x depth 3,000 mm x 1,800 mmTool height max. 1,300 mm The turning table is as good as new. The pictures are example pictures.The original is grey, otherwise exactly the same.

- Standard machine - with the existing accessories - suitable for diecutting and creasing

A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible.

- Thermal oil boiler - HTT WTÖ 200 - HTT WTÖ 160D - Daub KO 160 - all with oil burner

- Rack oven for 2 jumbo trolleys - Manufacturer: Hein Backofenbau GmbH - Type Ecostone LR1 8125D - With oil burner - Electrical connected load: 5 kW - 400 Volt 3ph 50Hz - Nominal heat output 145kW - Year of construction 07 / 2017

Offer 25396 Technical data: - Load capacity 250 kg - Face plate diameter 600 mm - Table height in horizontal position 910 mm - Face plate can be infinitely swivelled by hand crank - Face plate speed electr. infinitely variable 0.2 - 2 rpm - Welding current transmission 300 A - Drive 220 V - Right + Left - Run - E. footswitch - Space requirement approx. W 800 x H 910 x D 1200 mm - Weight approx. 150 kg

General Manufacturer: Hermle Type: C 40 U Year of Make: 2005 Control: Heidenhain TNC 430 Travels: X 850 mm, Y 700 mm, Z 500 mm B swivel axis Working spindle Speed: 28,000 rpm Tool/movement Tool changer: 38-speed Tool holder: HSK63A Dimensions and weight Weight: 10,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Spindle coolers IKZ high-pressure system 80 bar Blum Laser Measurement Workpiece probes Electric Handwheel HR410 Chip conveyor Oil mist extraction

CNC Machining Center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of Make: 2012 Travels: X-axis 2,340 mm Y-axis 800 mm Z-axis 600 mm Clamping area: 2,900 x 750 mm Pendulum machining 2 x 945 x 800 mm Table load: approx. 2,800 kg Mount: SK 40 Tool magazine: 30 – compartment Spindle speed 30 - 8,000 rpm Accessories - Chip conveyors - Paper tape filter system - Handwheel HR410 - Machine hood - 2x LTA suction - Partition wall - Pickup magazine for angle heads

Perfecting 1/5, CPC 1.02, Alcolor Dampening with Baldwin, Grafix Exactomat Powder Spray

CP 2000, Alcolor Dampening with Technotrans Refrigeration Circulation, Autoplate, Auto Wash for Inking Rollers, Blankets and Impression Cylinders, Preset Feeder and Delivery, Inking Unit Temperature Control, Dedicated Coating Unit, Berthel ComCon 110 IR Dryer, Grafix Betatronic 100 Powder Sprayer

Perfecting 2/2, 4/0, Alcolor Dampening with Baldwin, CPC 1-02, Low Pile, Quick Action Plate Clamps, Sheet-to-Sheet Feeder, Powder Spray, Min. Sheet Size: 140x210 mm, Max. Printing Area: 472x645 mm

Straight Machine, Stream Feeder, Double Sheet Detection, Electronic Side Lays Control, Alcolor Dampening With Baldwin Cooling Refrigeration, CP Tronic, Printmaster PM 74 Press Control, Easyplate, Weko Powder Sprayer, Speed: Up To 13.000 Sheets/Hour

Straight Machine, Speed upto 15000 Sheets/hour, CP Tronic, Autoplate, Cocking Register, Automatic Washers Devices, Alcolor Dampeing, Baldwin Refrigeration System, Double Sheet and Side lay Detector, Segmented Ink Knives, Powder Sprayer, Standard Accessories

Reference Num.: 4386 Brand: Heidelberg Type: CYLINDER OHZ - 54 x 72 cm Size: 540 x 720 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 540 x 720 mm Printing units: 1

Straight Machine, Speed upto 15000 Sheets/hour, CP Tronic, Autoplate, Cocking Register, Automatic Washers Devices, Alcolor Dampeing, Baldwin Refrigeration System, Double Sheet and Side lay Detector, Segmented Ink Knives, Powder Sprayer, Standard Accessories

Size: 930 x 1140 mm Equipments: Thermal-CTP 2 laser heads Gen II, ( with 64 Laserdiodes) Class 160 Resolution: 2540 dpi, SCL Single Cassette Loader Productivity option = 17 plates/h. Glunz & Jensen C 85 washout rubber station Glunz & Jensen compact stacker 85/105

Center height: 180mm, swing diameter over bed/cross slide: 360mm/190mm, distance between centers: 750mm, speed: 1250rpm, machine dimensions X/Y/Z: approx. 2800mm/1000mm/1300mm, weight: approx. 1750kg. An on-site inspection is possible.

- Single sheet feeder - ALCOLOR dampening units - Baldwin cooling device - Quick action plate clamps - Bacher register system - WEKO T6 powder spray - Minus Version

- Single sheet feeder - conventional dampening - Plus Version

- standard machine - with the existing accessories - suitable for embossing and diecutting

- Prinect Press Center - Wallscreen - Inpress Control (2019 renewed) - Preset Plus feeder - ALCOLOR Vario damening - Technotrans CombiStar (aircooled) - AlcoSmart - Ink temperature control - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - HEIDELBERG Autoplate - Coating unit with chamber blade with 2 anilox Rollers - WEKO AP 262 powderspray - AirStar - StaticStar - DryStar - X2 extended delivery - Preset Plus delivery - PIAB System for the central connection - all standard compressors available

Flatpile With Tremathead, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Stations: 2 Pockets, Delivery

Pallet Feeder with Tremat Head, 1st Sation: 4 Pockets, 2nd Station: 4 Pockets, Mobile Knife, Delivery

Serial No. FH. FANB-000076, Flatpile Feeder With Tremathead And DCT Control, 4 Pockets, Delivery, Equipped With Heidelberg Gluing Unit, Format: Max. 40x84cm, Min. 10x15cm

Serial No. FH. FAPF-001439, Flatpile Feeder, 4 Pockets, Delivery

A Mitutoyo height measuring device including granite plate is available. Granite plate dimensions X/Y/Z: 1000mm/630mm/100mm, max. plate load: 300kg, plate weight: approx. 190kg, measuring range: 630mm, resolution: 0.001mm, min. repeatability: 1.8µm. Machine dimensions X/Y/Z: approx. 300mm/300mm/1050mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

Hebrock edge banding machine AKV 3005 DK-F Year of manufacture 2004 Equipment and technical data: max. edge thickness 3 mm with preparation for alternating pools min./max. workpiece thickness 8-60 mm Feed speed approx. 10 m/min Readiness for operation approx. 5 min. min. workpiece length 190 mm min. workpiece width 80 mm Joining milling unit with 2 milling heads with PLC control Glue basin with contact roller Pressure zone Pruning shears Cross-cut saw Combination milling unit flush/chamfer/radius pneumatically adjustable 2- Milling station Corner Copy Unit Wing scraper, short version Radius scraper blade Spraying device Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg

Block production line HENKE - Type 140/100/40 - Board size 140 x 100 x 4.5 cm (all-plastic boards) - Control Siemens S5-115 U - uncl. 25 Molds Stone fabrication machine with facing & core concrete = Paving stones, kerbstones, kerbstones, U-stones, hollow blocks & solid block bricks can be produced - Min. product height 50 cm, max. product height 400 mm HENKE-Vibra-Matik vibration: infinitely adjustable Compaction by adjusting the imbalances - Waterjet system for product refinement, lifting ladder payload 10,000 kg, Transfer platform with skip carriage Board shelf: front track countersunk ladder, clearing lane, packager, board brush, board turning cross Rear track: Lore track, Euro pallet beaver, vertical & Horizental binding machine incl. packer and strapping system

Min. plate format: 240 x 240 mm Max. plate format: 676 x 760 mm - SCL - MCL - Inline punching - Stacker PST 26C - incl. RIP

CP TRONIC CPC 1.03 ALCOLOR with Baldwin 236 mill impressions IR DRYER GRAFIX PERFECTING 2/3-5/0 AUTOM. BLANKET WASHERS via CP TRONIC GRAFIX Powder spray Steel plate on feeder and delivery Quick action plate clamps 11,000 sh/h Pneumatic compressor Plate punch In production

Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.

Tenon cutting and slitting machine Hemag With automatic table feed Type: ZR 351 -Cross-cut saw motor power 2.2 kW Saw blade diameter 420 mm Cutting height maximum 120 mm -Slotted spindle motor power approx. 4 kW Spindle diameter 40 mm, spindle clamping length 180 mm Tool diameter maximum 350 mm Sliding carriage with automatic feed motor 1 kW max. tenon length 145 mm max. slot depth 145 mm max. wood thickness 200 mm max. wood width 400 mm Machine dimensions: L 2200 mm x W 2300 mm x H 1800 mm Weight: 1850 kg

used perforation bar for Heidelberg GTO 46 only. The bar is in very good condition with side bolts.

17 pieces of new- never used in original packaging ball bearing for ink and dampening rollers number: 6002.2RSR. Can send worldwide.

- suitable for embossing and diecutting - standard machine - with the existing accessories

- suitable for embossing and diecutting - standard machine - with the existing accessories

Two Heidelberg folding systems are available. 1) Stahlfolder Heidelberg 56 system, year of manufacture: 2006, flat pile feeder: FFH-56, min. sheet dimensions X/Y: 140mm/1800mm, max. sheet dimensions X/Y: 560mm/900mm, paper weight range: 40g-250g/m², max. stack height: 800mm, max. throughput capacity: approx. 200m/min, buckle plate station: BUH-56, working width: 560mm, folding roller diameter: 44mm. 2) Stahlfolder Heidelberg 66 system, year of manufacture: 2006, min. sheet dimensions X/Y: 140mm/180mm, max. sheet dimensions X/Y: 660mm/1040mm, paper weight range: 40g-250g/m², max. stack height: 1200mm, throughput capacity: approx. 200m/min, working width: 660mm, folding roller diameter: 44mm. Documentation available. On-site inspection is possible.

Heidelberg SM 52-2P Age: 2004 Counter: 28.1 million impression Format: 37 x 52 cm Performance: 13.000 sheets/hour Equipment: 2 printing units Alcolor Baldwin Balcontrol dampening and cooling device CP Tronic Autoplate Inking Unit program controlled washup device Blanket cylinder washup device Pull lay control in Feeder Single multiple sheet detector/electromechanical Double sheet detector in Feeder Sheet decurler in Delivery Powder Alphatronic 200 Plus version With N+P

Alcolor with Baldwin cooling all washing facilities Autoplate CPTronic Color remote control: CPC 1-04 Extended high-pile delivery with I.R. dryer approx. 94 million prints

NUMBERING AND PERFORATING UNIT FOR SPEEDMASTER 52 -As new, used just few times -Shaft with 2 wheels -2 cams, one perforating arm -Available immediately in our warehouse

A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible.

multifix: ja digital: ja centre distance: 1000 mm : 440 length: 2000 mm width: 1400 mm height: 1500 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference ID: PP-55939 Category: Letterpress Manufacturer: Heidelberg Model: SBG Year Built: 1960 Condition: Good Location: Europe Availability: Immediately Maximum Sheet Size: 56 × 77 cm Machine Description Heidelberg SBG Cylinder press equipped with the following features: Pre-stacking device Front lay and side lay equipment Device for inserting forms Device for cutting edge adjustment Device for processing thin paper Speedometer Special grinding plate Dimensions: 1.90 × 1.30 × 1.65 m Condition & Ownership Single owner Very good condition Included Accessories Material cabinet including materials Die-cutting plate Scope of Delivery (consisting of) Base frame Feeder Delivery Inking unit Printing cylinder block Drive cabinet Accessories

Heavy Duty Semi-Automatic Vertical Panel Saw Wood Her Supercut 1216 Cutting area 5300 x 2200 mm Cutting depth max. 80 mm Swivelling control panel Central display for horizontal and vertical cutting pneum. Lifting and lowering the transport rollers pneum. Latching during vertical cutting pneum. Horizontal cut locking pneum. Immersion of the sawing unit Interface extraction Saw motor 5.5 kW CE version Machine is FUNCTIONAL in VERY GOOD CONDITION From stock Lieboch