he used for sale

Roundpile Feeder, 4 Pockets, 2 Knives

Serial No. FH. HCC0-00630, Pallet Feeder, 4 Pockets, 2 Knives, Delivery

DTG PRINTER Kornit storm HD6 YEAR 2017 MADE IN ISRAEL EQUIPMENT: TEXTILE DIGITAL PRINTER MODEL: STORM HEXA SERIES LOCATION: (Mexico City) Specifications DTG T-Shirt Printing Machine Prints one t-shirt in approximately 40 to 60 seconds Features 2 pallets for nearly simultaneous printing Equipped with 2 control monitors Requires a two-phase plug Initial setup assistance for printing Does not come with inks or spare parts Printing time per t-shirt: 60 to 90 seconds Is already packed and stored Find more here - / Contact us at -

Heidelberg Primescan D7100 with mounting station and 4 drums Vertical drum scanner with photomultiplier technology. Professional and multifunctional high-end drum scanner for all scanning tasks up to the format 150 - 450 x 480 mm for originals top view/transparency Acquisition: 2005 General overhaul: 2015 Accessories: - Primestation D 7100 / Offline mounting station for all Primescan drums 150 - 4 drums Scan resolution: Color/Semi-tones/Stroke max. 4330 L/cm (11,000 dpi) Scale range color/halftone/line 20 - 3000 % Scale calculation Stepless with autoscaling in 0.1 % steps Differentiable density range 3.9 D, measured on the film output of a gray wedge Resolvable density 4.2 D, measured on the film output of a gray wedge Template types Transparency and top view, color and black and white, halftone and line originals, positive and negative Original thickness max. 2 m ...

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - / Contact us at -

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

2008 HEINRICH SCHNEIDER PMS 400 Measuring machine Type: PMS 400 Year of construction: 11/2008 Magnification: 1.5x Voltage: 240V AC Frequency: 50/60 Hz Power: 1 kW Technical data: see pictures Find more here - / Contact us at -

2016 Hexagon OC 322 Measuring machine The machine is in perfect working condition. The 2016 Hexagon OPTIV CLASSIC 322 is a type of coordinate measuring machine (CMM) manufactured by Hexagon Manufacturing Intelligence. This machine is used for precision measurement and quality control in manufacturing processes. PRODUCT DESCRIPTION The Optiv Classic 322 combines optical and tactile measurement in one system (optional touch-trigger probe). The system supports multi-sensor measurements using the Vision sensor (CMOS colour camera, motorised CNC zoom) and the touch-trigger probe HP-TM. The Optiv Classic 322 provides easy pallet station integration with good accessibility to the measuring table from all sides. Measurement software is PC-DMIS. FIELDS OF APPLICATION • Shop floor and inspection room • Versatile geometry measurements and GD&T analysis DESIGN Design principle : Ben ...

This shredder for plastic waste is an essential tool for efficient recycling operations. Designed to handle various types of plastic, it offers reliable performance for reducing waste volume. Perfect for recycling facilities and manufacturing plants, this machine ensures effective plastic waste management. By integrating this equipment into your operations, you can enhance your sustainability efforts and streamline your recycling processes. Ideal for businesses aiming to improve their environmental impact, this solution for plastic waste is a must-have for modern recycling needs. Power: 22 kWVoltage: 380/660 VCurrent: 43.5/25 AFrequency: 50 HzSpeed: 1465 rpmDrive: VDE 0530Efficiency: cos 0.85Protection Class: ISO B Find more here - / Contact us at -

Machine Type: Center Grinding Machine Manufacturer: Henninger Model: ZS 200 Year: Not specified - Max Workpiece Length: up to 2000 mm - Workpiece Diameter: 285 - 325 mm - Center Diameter: 2 - 110 mm - Bore Taper: 50 - 120 mm - Center Height: 165 mm - Wheel Diameter: 10 - 60 mm - Grinding Wheel Speed: 9150 - 18300 RPM - Power: 0.4 kW - Weight: 0.5 tons Equipped with: - Pneumatic centering device

Shipping packer Dispatch packing machine Type HE F 470 / BDS Year of construction 2008 / 2002 Find more here - / Contact us at -

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - / Contact us at -

Manufacturer: Faccin Model: 4 HEL 2128 Type of Machine: Round Bending Machine Condition: used Find more here - / Contact us at -

Key data: 4 mm, 1 mm, 770 mm

Heidenhain iTNC 530 Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Pendulum operation 2x 1,450 x 1,000 mm Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 30 - 4,500 rpm Accessories -Conveyor - Electronic handwheel - Coolant filter system -Partition - Vetter gantry crane 2 tons - Benz SK40 angle head with torque arm

Product number: 3081 Type: BT-KS-BSPW Serial number: 5047-1 Year of construction: 2008 Belt width: 600 mm Model: 90° right hand side Infeed height: 100 mm Radius: 2050 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 2500 x 3500 x 1300 mm With in height adjustable outfeed conveyor

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

Gluing star with heating plates. Connection 30 KW. Four pressing surfaces. Hydraulic, pneumatic. Further dates will follow.

Herma 752C labeller Serial: 80002791 2019, Stainless, Herma H400 labeller, on height adjustable frame, conveyor dimensions 1100mm x 230mm, with Zodiac HS printer and touch screen, with wiring diagram, 1Ph

- Brand: Herbold - Model: HV-30 - Year: 2006 - No electrical panel. - Composed of: 1. Feeder silo with bag filters. 2. HU30 agglomerate with 75/90 kW (102/122 hp) motor. 3. MFT 35/450 7.5 kW (10.2 HP) transport vacuum cleaner. 4. Cyclone windbreaker and MFT 30/300 vacuum cleaner with 4 kW (5.4 hp). 5. Reshredding mill. Brand: Herbold, Model: SML 30/50-53-2, Motor: 11 kW (14.8 hp). 6. MFT 18/180 type 1.5 kW (2 HP) transport vacuum cleaner. 7. Fines separation system with 2.2 kW (3 HP) vacuum cleaner with cyclone and return of fines to the main silo.

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 ja_yes boring of olive 1=yes, 0=no: 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill h ...

Rego Herlitzius Type: Rotec 350 Circular knife Year of construction 2010 Cutting width: 3 – 25mm completely made of stainless steel for loaves max 3250mm length on casters tested and cleaned Stock level: 2 pieces

- CPC 1-04 - ALCOLOR dampening units - Technotrans ALPHA cooling device - Heidelberg Autoplate - ink roller wash-up device - blanket wash-up device - impr. cylinder wash-up device - Perfecting 6/0 or 2/4 - Grafix Alphatronic 200 - High pile delivery

power capacity: 12 Nm volt: 210 V ampere: 21,5 A total power requirement: kW weight of the machine ca.: 13 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 9500 mm y-travel: 2500 mm Control: Siemens type: 840 C ram: horizontal adjustment: 700 mm spindle travel: mm dimension of the ram: 400x400 mm Plate area: mm rotary table:: Table load: 25000 kg table travel: 2500 mm Table area: 2000x2500 mm angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Control: Heidenhain 430 ITNC tool taper: SK 40 spindle turning speed - stepless: 13465 U/min voltage: 400 V control voltage: 24 V weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for roll and strip goods Glue application station: cartridges + PU gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 3 mm (6mm) edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling, radius milling, chamfer milling - 15° Scraper unit for chamfers and radii Surface Scraper Unit - Finish Machine is CHECKED in TOP CONDITION from very well maintained craft business from stock Lieboch

Specifications: Lifting capacity: 100 tons 1-side driven Smallest diameter: 480 mm Largest diameter: 4800 mm Diameter rollers: 700 mm Motor power: 2 x 0.75 kW Rotation speed infinitely variable Side rollers for moving on rails Dimensions (length x width x height): approx. 3900 x 1300 x 1300 mm Weight: approx. 7 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

One head stitcher AGRAFIX - heavy duty in production ready condition. Can ship worldwide.

Control: Heidenhain iTNC 530 Travel: X-axis F/H: 3,220 / 2,600 mm Y-axis 800 mm + 65 mm Z-axis F/H 850 / 1,000 mm T-slots 7 pieces Mount: SK 40 Tool magazine: 100 – compartment Spindle speed: 50 - 12,000 rpm Equipment - Internal cooling (IKZ) 20 bar - Belt filter coolant 1250 l -Conveyor - Laser Tool Control System TM200 - Rinsing gun - Electrostatic exhaust air filters - Electronic handwheel -Partition - 2x LTA suction - Prepared for 5th axle

impressions: 44 Mio. max. printing speed sheets: 8000 /h max. paper size: 32x46 cm numbering unit: include The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electronic boards for Heidelberg Quickplater 46 PVC plate developing machine. Can ship worldwide.

Table dimensions: . mm Motor output: . kW Spindle diameter: . mm reus: 100 - 1500 U/min horizontal: . The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

(processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: PJ000016 // Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, exte ...

Manufacturer: Bosch Type: UT-L 1 Number of pieces: 2 pcs. Year of Make: 2021 Volume: 625 l Power: 650 kW Brenner: Dreizler Marathon M 601 ARZ Included: Gas control system

M. No.: GS000506 // Counter: 26‘795‘055 // Speed: 13000 Sheets / h Format: Sheet format max. 370 x 520 mm // min.: 105 x 145 mm Print format max: 360 x 520 mm Thickness: max. 0,4 mm Dampening: Alcolor dampening systems with Baldwin BC 713 EF cooling device Powder device: Alphatronic 200 Equipment / further information Ultrasonic double sheet control Heidelberg EasyPlate plate clamping device with automatic plate cylinder positioning for quick plate changes with just one tool. Blanket cylinder with central clamping screw for tensioning at the front and rear edges Automatic blanket and impression cylinder washing device (for normal colors) suitable for conventional and vegetable oil-based washing agents, program-controlled via the control system.

Key data: 600 mm, 450 mm, 400 mm

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Table size: 850 x 440 mm Spindle holder: SK 40 Control: HEIDENHAIN TNC 355 Spindle speeds: 20 - 4000 rpm Spindle motor: 5.9 kW Quill stroke: 80 mm Feeds - longitudinal/transverse/vertical: 1 - 2000 mm/min Feed force x/y/z: 7200 N Rapid traverse longitudinal and transverse: 10 m/min Rapid traverse vertical: 10 m/min Total power requirement: 12 kW Machine weight approx.: 2.5 t Dimensions L x W x H: 2.7 x 2.5 x 2.0 m Handwheel, coolant device

x-travel: 390/410 mm y-travel: 290/310 mm z-travel: 380/400 mm total power requirement: 4 kW weight of the machine ca.: 1,25 t dimensions of the machine ca.: 2100x2100x1700 m technical data please see attachment! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm Control: Digitalanzeige Heidenhain turning speed range: 45 - 2000 U/min feed range: 0 - 3000 mm/min tool taper: SK 40 weight of the machine ca.: 2 t universal rotary tilting table diverse toolholders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Stream feeder - ALCOLOR dampening units - BALDWIN Balcontol cooling - FilterStar Compact - EasyPlate - Blanket wash-up device - Grafix Alphatronic 200 - Superblue delivery drum - Plusversion

Sheet format: max. 760 x 1060 mm, min. 300 x 350 mm Equipment: Stripping station, centerline, non-stop, micrometer adjustment, electronic double sheet control, sheet marking device, vacuum feed belts, drawing mark left, slide mark right, machine hours approx. 8 million punches, 1 die-cutting frame Quick-release frame at the top/bottom of the stripping station, raised position, max. machine speed 8,000 sheets/hour, max. die-cutting pressure 260 tons, materials that can be processed: paper min. 90g/m², cardboard / solid board max. 2,000 g/m², corrugated board up to 4 mm.

Size 36 x 52 cm, Cptronic, Alcolor dampening, MGE cooling and recirculation unit, Autoplate, All washers. Machine nr: 203114, Impressions: 96 million

For sale is a used Nordson Problue 10 hot melt machine

For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)

A cardboard stand for pre-glued cardboard tubes and an associated carton sealer are sold. The system was only serviced and some things were renewed by the manufacturer because the purchase of the new line was questionable. Conveyor belts are also supplied in addition to the carton erector and carton sealer. Photos to follow

Heidelberg Punching Crucible A3+ Incl. Foil stamping Hakro Conversion Feed digitally adjustable

Weight 1300kg Size L 1.66xW1.24xH1.66m Power connection 380V power consumption sheets per hour 5000 Sheet format (max) 260 x 380 Sheet format (min) 40 x 70

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

One-way operation: Length A 100 mm - 1240 mm Width W 80 mm - 1400 mm Length of window/lining C 60 mm - 720 mm Width of window / lining D 30 mm - 1140 mm Two-lane operation: Length A 100 mm - 1180 mm Width W 80 mm - 660 mm Length of window/lining C 60 mm - 720 mm Width window / lining D 30 mm - 530 mm

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 10 min. module: 1 workpiece dia. over saddle: 250 mm spindle bore of workspindle: 102 mm quill stroke: 100 mm workpiece turning speeds: 0,0032 - 2,6 U/min feeds - rolls: 0,027 - 5,66 mm/WU feeds - longitudinal: 0,3 - 198 mm/min main drive: 4 kW swivel angle for work spindle: 90/120 ° diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min total power requirement: 9,5 kW weight of the machine ca.: 4,2 t Machine equiped with: - Heavy Duty Hob Head ApFw - change gears - Milling Head ApFF - Single Indexing Device ETE - Bush Rest - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width 66 cm Year of manufacture 2004 Standing sheet delivery Pressing station digital version Delivery date: immediately from stock Price on request. We supply and install worldwide.