he used for sale

x-travel: 1450 mm y-travel: 1100 mm z-travel: 1300 mm Control: Siemens 840D working spindle:: forward bearing diameter: 100 mm tool taper: SK 50 spindle turning speed range: 20-6000 U/min rapid travel x/y/z: 60 m/min feed range x/y/z, infinitely variable: 1 - 60000 mm/min weight of the machine ca.: 31 t Equipment / Accessories: - automatic pallet changer with 2 pallets - clamping surface 1000 x 800 mm - max. loading weight per pallet (centre): 2000 kg - max. rotation speed of the table: 60 rpm - tool tower magazine with 180 places - max. tool-Ø (with free secondary positions): 250 mm - max. tool-Ø (with occupied secondary positions): 110 mm - max. projection length: 450 mm - max. tool weight: 35 kg - max. tilting torque: 50 Nm - max. total mass of all tools per tower: 600 kg - CNC manual control unit - coolant device with paper belt filter - internal coolant supply 80 bar - ch ...

This Heckert HEC 500 D XXL Horizontal Machining Center was made in the year 2007 and has 23032 production hours. It is equipped with a SIEMENS Sinumerik 840 D control unit. It is equipped with increased drive power of up to 37 kW with max. spindle speed of 10000 rpm for heavy machining, (primarily for steel and cast iron) with reinforced column and hollow shaft motor.

This Heckert HEC 500 D XXL Horizontal Machining Center was made in the year 2007 and has 23032 production hours. It is equipped with a SIEMENS Sinumerik 840 D control unit. It is equipped with increased drive power of up to 37 kW with max. spindle speed of 10000 rpm for heavy machining, (primarily for steel and cast iron) with reinforced column and hollow shaft motor.

This Heckert HEC500D XXL Horizontal Machining center was manufactured in the year 2010. It is equipped with a SIEMENS SINUMERIK 840D control unit. The machine has a spindle speed of 15000 rpm.

Magnetic stirrer with heating function and the ability to set the time after which the process is to stop. For laboratory and other applications. Works great with magnetic dipoles, glass, PTFE and stainless steel containers. Equipment in factory packaging, with manufacturers instructions and software. Power cable included. Temperature probe included. The device can work with or without the probe, as it has a built-in temperature sensor in the heating plate. Included rs-232 dsub9 cable and dsub9 - usb adapter. The device is marked new (other) because it was purchased for software testing. The equipment has been run a maximum of 10 times and connected to a computer to check the correct operation of the software being developed. Digital display of speed and temperature. Additional safety circuit. Cooktop is disconnected by two independent temperature sensors Connecto ...

Description: Control and Machine Number Control: SIEMENS Sinumerik 840 D Machine no.: 14351 Travels and Axes Travel X-axis: 1450 mm Travel Y-axis: 1100 mm Travel Z-axis: 1300 mm B - axis: NC rotary table Pallet dimensions & Pallet changer Number of pallet places: 2 , Pallet dimensions: 1000 x 800 mm Feeds & Spindle Rapid feed X,Y,Z: 60 m/min Working feed: 1- 60000 mm/min Feed force max. X|Y|Z : 20|18|20 kN Spindle speed: 20 - 6000 rpm Tools & Tool changer Tool holder: SK 50 Chip to chip time: approx. 5 sec. Tool change places: 180 General data Coolant system Chip conveyor Please have a look at the technical data in PDF format . z-motion: 1,300 mm, change time of pallets: 5 sec, x-motion: 1,450 mm, y-motion: 1,100 mm, control: SIEMENS Sinumerik 840 D, numbers of pallets: 2, taper: SK 50, toolchanger positions: 180, turning speed range: 20 - 6000 rpm ...

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br><br>Verf Gbar: Instant

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Material: 1.4571/ stainless steel Content: 16 ltr Weight: 2000 kg Length x Width x Height: 2500 mm x 1300 mm x 2000 mm Filter area : 0,12 m² Fill : 16 ltr. Working pressure : 25 bar. Further information: Basic application area: - Suspensions with subtle and subtlest solid materials, which need for fast and optimal dehumidification a high adrift pressure difference.. - Dry sludge, those won coal is compressible and throught strong mechanical pressure arrives a drastic reduction of pore volume - Products, at those a widely dehumidification is possible after cake constitution through a displacement of pore fluid through gas - Suspensions, whose need for unproblematic abscission a degressive or a progressive supply of dehumidification potential. Very good condition. You can also get the entire system with all components you need. Write us below!

Technical data: 2000 overtaken Turning diameter over bed: 1350 mm Turning diameter via slide: 1250 mm Sheet: 1350 mm Clamping on the flat disc: 300-900 mm Turning length: 5000/6000 mm

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen info@miw-zeven.de

Incubator from Heraeus Type: B 5090 E Rated temperature: 70C 2-door glazed Dimensions: length x width x height: approx. 119 x 71 x 75 cm Weight: approx. 70 kg

Data sheet / Offer spare Monitor Heidenhain Controls TNC 131, 135, 145, 150, 151 Overview: - 8,4 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by 24pol. Centronics conector he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

Data sheet / Offer spare Monitor Heidenhain Controls TNC 155,355 Overview: - 12,1 industrial monitors TFT substitute with 14CRT monitors. - Connection: compatible plug connectors to the very easy installation. - Chassis monitor from high-quality high-grade steel case with compatible connection. Description: The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by 15 pol. SUB-D conector he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation

Main drive - spindle motor at 2450 RPM power - 4,5 kW spindle speed within four gears - infinitely variable speed range 20-4000, tool holder horizontal and vertical ISO 40 tool CLAMPING hydromechanisch 1200 daN, Quill stroke vertical fur 80 mm feed drive - single DC motors 1-2000 mm / min feed force in all axes each axis 5400 N, rapid traverse in all axes 5 m / mon workspace - along x axis 500 mm, cross y axis 360 mm, vertical z-axis 400 mm measurement - measurement of X, Y, Z - direct, resolution 0.001 mm, input gauge 0.001 mm, display step 0.005 mm, resolution 0.001 mm table AUFSPANNFLaeCHEN of rigid 4.Achse angle table 800 x 390 mm number and distance of T-grooves, wide T-slots 6/63/14 h7 NC rotary table 30 swivel 4.Achse - diameter. 380 mm control train control HEIDENHAIN TNC 115 / TNC 355 - screen screen - control SIEMENS 3 M4 810 M Kuhl installation - lubrication coolant - rinsing  ...

Power 365 KW 2 pieces available , price each piece: 1,000,00 € 1 engine built: 1983 and 2nd engine built: 1973 19 100 Displacement cm3

Centrifuge ELLER work standing on 3 feet : Manufacturer eller Type: 734 C. Serial No.: 78-043 Year of construction: 1978 Drum diameter: 800 mm Speed: 1,500 rpm Capacity: 120 kg The eller centrifuge is a filter centrifuge for pharmaceuticals, fine chemicals and chemistry industry, at the solid liquid separation happens mechanically. The typical process includes filling, washing of the cake, spin and unloading. A possible criterion is the way the solids are discharged. This determines the respective execution. In very good condition!

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

Tray labels

SAW CARRIAGE DISTANCE: 610-710 MM, RANGE OF CUTTING: HEIGHT: 200 MM, WIDTH: 200 MM, DRILL DIA.: 12 - 40 MM; STROKE: 630 MM;

FOOD CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -one side coated underside of fabric with additional wedge bar, (11 mm wide x 8 mm high) in the Middle -endless -Food safe, white -Dimensions: 5,100 mm x 300 mm width x thickness length approx. 1.2 mm, surface with tunnels. -Tunnel approx. 20 mm in height, distance approx. 300 mm, tunnel length 245 mm, studs tip inclined (see photo) On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible)

We have 2 pieces control cabinet fans from Rübsamen & Mr Type: LS0, 20W, 0.14 A and 230V the dimensions are 240 x 240mm, one fan is unused = 12,-€ and one was briefly in use = 10,-€

No.: 3164 Year of construction: 2001 Type of current. 400V vacuum pump, double jacket Electric heating adjustable Homogenizer adjustable Schauglass, perfume funnel in Rezleitung and cover etc. Mobile frame, control cabinet Dimensions: LWH = 800x1000x1650mm

Immediately applicable

Vibrating feeder with integrated screen segment (grizzly segment), working area 800 x 4.000 mm, E-drive by vibration motors 2 x 4 kW

TO WHOM IT MAY CONCERN; WE'VE 6 PCS USED HEINZMANN CONTROL UNITS AT OUR STOCK. ALL CHECKED IN WORKING CONDITION READY TO TRANSPORT. PLS FIND DETAILS ON BELOW. HEINZMANN CONTROL UNIT: DC 2010 2-01 00 FOR BASIC SYSTEM E RANGE 24V SERIAL NO.: 08 01 000036-2010 : 08 01 000031-2010 : 08 01 000039-2010 : 07 10 000813-2010 : 07 10 000809-2010 : 06 02 000102-2010 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

CTF: Computer to film

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

<br>Original numbering work for Heidelberg MO<br><br><br>

<br>8 stations 7 investors P 15 Bulletin station Trimmer Trimmer HT 15 Stacker RS 10<br><br>Still in operation: No.<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br><br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

; operational

Agilent Gaschromatograph model 6890/G 1530A Detector FID/EPC, Injector S/SL /EPC HP-IB and Jetdirect card upon request with Autosampler and Agilent Chemstation

Technical data: Diameter over bed: 1550 mm Diameter over slide: 1600 mm Turning length: 5500 mm Max cross travel: 400 mm

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified

- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product

HEIDENHAIN measuring rod ULS300

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

20pcs new rollers for HEIDELBERG SPEEDMASTER SM102

Overhauled Plate clamps for Heidelberg Speedmaster SM102 price for 1 set (2 parts) (2 sets for 2 printing units/plates are depicted in the pictures)