he used for sale

x-travel: 600 mm y-travel: 350 mm z-travel: 500 mm total power requirement: 3 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 3701 Vertical console milling machine HESSAPP HC 50 et Working area: 600 x 350 x 500 Drive: 2,3 Control: Heidenhain TNC 135 / Indramat Table surface 1180 x 330 mm Speed range 70 - 6000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heidelberg Stahlfolder TD-78 6-4, age 2002 Roundpilefeeder RD.2-78 1. station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing Device rear -and front-mounted slitter shafts Gate-fold unit Etc. Available: at short term

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

1955 A4 Size Standard machine Machine no.: 107297N Located: Germany Available: immediately

Machines No. 681624, 21037400 impressions,

Key data: 400 mm

Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets

KITTNER Lift-tilt device, type KHV-350/30L, for lifting and emptying 200 litre and 300 litre standard loading trolleys. Technical data: Tipping height: adjustable from 3,050 mm to 3,550 mm in 100 mm increments. Lifting weight: max. 300 kg Motor power : 0.75 KW Mains connection: 400V - 50 Hz Lifting principle: by means of roller chain Lifting speed: 5 m/min. Column height: 4,420 mm Total height: 4,480 mm, incl. 200 l trolley in tilted position! Degree of protection: IP 65 Execution: Lifting/tilting device in left-hand version, which means: The loading trolley is retracted into the lifting fork to the left of the mast at right angles to the slide axle! The mast, lifting fork and the fairing of the machine are completely made of stainless steel, material no. 1.4301, surfaces ground. The "slider" and the "slider axle" to accommodate the lifting fork are not made of stai ...

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

Gas burner 1 flg. for city gas Heidebrenner AKO 70 Stainless steel Tabletop device Nominal heat load 3.8 kW Device is cleaned Dimensions: 410 x 410 x 200 mm, WxDxH Used device cleaned More bakery equipment in stock!

Laser type Gen3 / 160 - with 64 diodes current meter reading: 73,556 exposures. Laser exposure time: 1,830 hours Outer Drum Computer-to-Plate Platesetter for Thermal Plates 830nm Throughput 17 plates/hr at 2540 dpi Bacher tightening punching distance 425 mm Panel formats 240mm x 240mm up to 670mm x 760mm With software Prinect MetaDimension 10 ( License Service Dongle ) Software Prinect, Signastation (2012), Format 75, Version 11, M-Kit Prepress Press, Edition 2011 Workstation monitor mouse complete with accessories with documentation DVDs and - Plate washout station C85

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

6 Stations, Cover Feeder, ST100 Stiching Unit, ST100 Three Knife Trimmer, Delivery, Format: Max. 305x349 mm, Min. Format: 89x140 mm, Product Thickness Max. 1 cm, Capactiy: 9000 Cycles/Hour, Standard Accessories

Used rack oven HEIN, type: Luxrotor - for rack trolley 60 x 80 cm -out of order - ran until the closure of the bakery - is still in the bakery To be given away at a good price

Used proofing interrupter HEIN, type: Topline -In bakery condition- - new refrigerant 2022 - in operation until the end - Sale by closing the bakery - Plant still assembled Viewing possible.

- suitable for embossing and diecutting - standard machine without ink unit - with the existing accessories

- Flat pile feeder FD 66-T - Tremat - Digital Control - 6 folding pockets - 2 knifes - mobile stream delivery

Output infinitely adjustable up to 7000 bottles/hour. Number of screw heads 8 pcs. Installed power 1.68 kW Supply voltage 220/380 V; 60 Hz Compressed air requirement 0.3 m 3 Compressed air operating pressure max. 0.6 MPa Overall dimensions (length x width x height) 1450x950x2800 mm Weight 600 kg

Automatic plate loader Plate processor Automatic delivery. Stacker Program and Dongle Monthly contract serviced

HS451, built in 1993, retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

HW551, Extruder 55mm HDPE Single Head Up to 300cm3

HS451, built in 1993, Available with 1-fold/2-fold head/3-fold Optionally retrofit to PLC and E-extruder

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Vacuum tumbler Manufacturer: Henneken Model: B3 Volume: 1200 liters Electric power: 2.8kW Dimensions: 1130x2225x1675mm

Siemens Small X-ray / Intraoral Machine Heliodent MD with Tube SR 60/70/7 0.7

This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

Key data: 1 mm, 650 mm, 530 mm

Control: Heidenhain iTNC530 Travel: X-axis 1,200 mm Y-axis 650 mm Z-axis 520 mm Fixed machine table: X-axis: 570 mm Y-axis: 650 mm Z-axis: 520 mm Number of grooves 7 (â' 14 mm width) Feed X-/Y-/Z: 0 – 45 m/min Clamping area: 760 x 600 mm Swivel table: Clamping surface: Ø 520 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed: 50 - 12,000 rpm Accessories: - Kinematics Opt - Handheld operator - Screen filter system KM500 - IKZ 25 bar -Conveyor - Blow-off gun - Rinsing gun - M&H workpiece pushbuttons - M&H desktop radio switch

Offset printing machine Heidelberg MOZS, 2-color, machine number 610147, shingle feeder, Kompac dampening unit, approx. 76 million printing, minus version, in very good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Impressions=80 m, Max. size= 52 x 37 cm, Availability= 042026, Yes, ALCOLOR Autoplate all automic washing devices powder sprayer Grafix damping central: Technotrans LOT Loaded in truck or container

Impressions=182 m, Max. size= 74 x 52 cm, Availability= 062026, Yes, Yes, Perfecting 2-0, 1-1 AUTOPLATE ALCOLOR blanket cylinder: chromed automatic ink unit washing device automatic blanket washing unit autom. impression cylinder washing unit LOT Loaded in truck or container

Offset printing machine Heidelberg KORD, 1-color, machine number 334478, 46 x 64 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Plate bender, machine number 3986/47, year of manufacture 1998, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

good working conditions

-Sourdough Fast Fermenter -Model: BRSSF100 -Mobile on castors -completely in stainless steel -400 volts -1.5 kW -Year of construction 2012 -External dimensions approx.: 64x70x125cm WxDxH

Key data: 890 mm, 4000 mm, 5 1/min

CNC Turning/Milling Centre Control Siemens SIN 880T Centre Distance 4,000 mm Max. Swing over Bed Ø 890 mm Max. Swing over Crossslide Ø 820 mm Spindle Bore Ø 122 mm Spindle Nose DIN 55026/15 R.P.M. 5 – 1800 R.P.M. milling spindle 0,5 – 5000 Rapid Feed 15m/min Main Motor KW 50/69 Volts 400 Cycles 50 Tailstock Travel 3,708 mm Quill Travel 140 mm Including: Programmable tailstock Programmable steady ATC 95 Coolant Chip Conveyer

- 18.000 Bogen / h - Prinect Press Center - Wallscreen - Prinect Inpress Control - Preset Plus feeder (NonStop) with pile board - ALCOLOR Vario dampening units - Technotrans CombiStar Pro (water cooled) - Alcosmart - Ink temperature control - InkStar - Ink roller wash-up device - Blanket wash-up device - Impr.cyl. wash-up device - Autoplate Pro - Coating unit with chamber blade - Multi Loader - Anilox roller storage - Extended delivery X2 - Preset Plus Delivery (NonStop) with pile board - Dynamic sheet brake - DryStar IR/HL - StaticStar Advanced - Technotrans beta.f - CoatingStar - CleanStar - AirStar Pro wassergekühlt - ScrollStar - PowderStar AP 500

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.

Year of construction unknown suitable for GTO 52 2 numbering machines, 7 digits, counting forward Perforating device vertical Delivery date: immediately from stock Price on request. We deliver and install worldwide!

x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm Control: Heidenhain : total power requirement: 16 kW dimensions of the machine ca.: 5 x 4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference Num.: 4116 Brand: Heidelberg Type: GTO 52 Construction year: 1991 Impressions: 20 mio Size: 360 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 1 Machine size: Length: 1,350 mm, Width: 1,400 mm, Height: 1,550 mm Total weight: kg 1,370 / lbs 3,020 Power: KW 2 / hp 2

Formato 54 x 72 cm

Formato 57 x 82 cm