133,335 used machines on RESALE, but how to find them? Machine Search
Tol measurements: - 0 weight max.: - t range L-W-H: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1500 mm width: 800 mm drawer block: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. temperature: 800 Grad size of opening: Durchmesser 430 mm depth of chamber: 630 mm dimensions of the machine ca.: 2 x 1 x 1.6 m weight of the machine ca.: 530 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Type: KUX750VAC Serial number: 12110 Year of construction: 2007 Bowl capacity: 750 litres Knife speed: variable, 60 - 3300 RPM Mixing speed: 150 RPM Bowl speed: 4, 7, 10, 14 RPM Power: 3 x 380V, 50Hz, 273kW Compressed air: 6 - 10 Bar Water: 2 - 6 Bar Dimensions: 4330 x 3700 x 3050 mm (open lid) Weight: 7900 kg With double lifter for 200L tote bins and unloader
Compressor COMPAIR L22 SR-10 Volume 2.86 m³/min Properties: Identification number 100016088/0009 Built-in compressor 6115 Order no. 10698941 Compression medium AIR/LUFT Length 800 mm Width 700 mm Total height 1400 mm Weight 355 kg Volume flow 2.86 m³/min Suction pressure 1 bar Step pressures 10 bar g Speed 3600 min ̄¹ Installed motor power 22 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz
Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...
Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 ...
Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2250 Make: Lippert Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, s ...
x-travel: 3.000 mm y-travel: 1.000 mm z-travel: 860 mm Control: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mm T-slots: 7 x 18 T - slots distance: 125 mm distance table - lower edge spindle: 25-366 mm table weight: 4.200 Kg b-axis: +-105 ° c-axis: +-360 0 rapid travel x/y/z: 30.000 mm/min rotary table: Durchm. 1.000 mm max. turning diameter: 1.400 mm number of spindle speeds: 9.000 U/min/rpm tool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kW max. torque on the spindle: 240 Nm tool change unit: AITEK, 40 fach : 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bar total power requirement: 65 kW weight of the machine ca.: 24,8 t dimensions of the machine ca.: 8.056 x 5.496 x 3.790 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
core drilling diameter max.: . mm bore depth: . mm swing diameter: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used tank with anchor agitator, capacity 300 liters. Water jacket heated by heaters. Made of stainless steel. Electric drive with gear motor. Control cabinet.
Offer 22650 Specifications: - Lifting capacity 2100 t - Y distance in width 4.0 m - Y – dimension in length 3.5 m - 3 load handling hooks at the Y ends load capacity each 1000 kg - Forklift drive-in shoes W 500 x H 230 mm - Truss dimensions approx. L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Center truss tube made of square tube 140 mm - Overall height approx. 510 mm - Transport dimensions L 3.2 x W 2.1 x H 0.55 m - Weight 600 kg
LBBC Autoclave Internal dimensions 1000mmx1500mm Type: Quicklock Thermoclave Heat rating 30kW 6 Vacuum bags Heating ramp 5°C/min, 218psig, 220 Kgs combined materials, Year 2001 Complete with material trolley, associated piping, control panel
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: MPB Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 40,300 mm Number of fields per row of shelves: 14 pcs. Number of levels plus ground level: 06 pcs. Technical data on the volume: Pallet spaces per field: 21 pcs. Pallet spaces per rack row: 294 pcs. Total pallet spaces: 294 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 400 kg The scope of delivery includes: 15x Pallet rack stand, used Material color: blue Stand Type: STD ́DB ́30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 11,500 mm Depth: 1,100 mm 168x Material colour: RAL 1007 d ...
Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.
The scope of delivery includes: 01x Lightweight water hose Material: Polyvinyl chloride (PVC) Material color: black Diameter: 12.7 mm (1/2 inch) Length: 20 m Suitable for up to 200 psi (13.8 bar) Robust, 3-layer construction Weight: 2.60 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack crossbar: Shelving system: Dexion (Hovik) Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: white Box profile: 120 x 50 mm Agraffe: 5 HK Clear width: 2,700 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
length: 1000 x 600 x 300 mm table load: 300 kg total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg dimensions of the machine ca.: 1,30 x 1,00 x 2,65 m LACHNIT Tilting and Lifting Device Stainless steel column, welded steel container Container dimensions: 1000 x 600 x 300 mm Discharge height: 1.460 mm Control via push-button at column and pendant control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbar: Shelving system: Dexion (Hovik) Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: white I-profile: 100 x 50 mm Agraffe: 5 HK Clear width: 1,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack crossbar: Shelving system: Dexion (Hovik) Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: white I-profile: 100 x 50 mm Agraffe: 5 HK Clear width: 950 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
spindle turning speed range: 170 - 18000 U/min weight of the machine ca.: 7,5 t dimensions of the machine ca.: 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headsto ...
Year: 2008 Impressions ca: 86 mil - Max Format: 375x520 mm - PCS-G: consolle for ink and register control with touch panel. Electronic control of double sheets. Electronic control of the sheet missing. Pointing tape sucked. Photocells. Automatic ink regulation from consolle. RyobiMatic-D: alcool dampening with variable speed. Refrigerator Technotrans. Automatic Washing of blankets, rollers and impression cylinders. Semi-RPC: Semiautomatic Plate Changer. Circumferential, assial and diagonal registers. Extended delivery. High pile delivery. Powder spray Grafix. LED UV Books and tools.
x-travel: 4000 mm y-travel: 1000 mm z-travel: 1500 mm Control: Heidenhain 355 weight max.: 10 t head swivability: ° : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Winfos Model: YC 180 Year of Manufacture: 2010 Type of Machine : Longitudinal Slitting Line In operation since: 2017 Condition: Operational Technical Specifications: - Line length: 24.5 m - Line width: 7.8 m - Material thickness: 1.5 ~ 5.0 mm - Maximum coil diameter: 1.8 m - Coil inner diameter: 640 – 800 mm - Maximum coil width: 1500 mm - Maximum coil weight: 16 MT - Installed power: 253 kW Line Speed: - At 1.5 mm thickness: 110 m/min - At 4.0 mm thickness: 95 m/min Tooling & Accessories: - Knives – 186 pcs total: - Set 1 – 10 mm, Ø307: 26 pcs - Set 2 – 14 mm, Ø315: 66 pcs - Set 3 – 14 mm, Ø315: 50 pcs - New Ø320: 44 pcs - Rubber rings – 93 pcs total: - Set 1 – 25 mm: 31 pcs - 15 mm: 12 pcs - Set 2 – 25 mm: 31 pcs - 15 mm: 18 pcs - Set 3 – 25 mm: 31 pcs - 15 mm: 18 pcs - Slitter knife spacers: 480 pcs - Separator spacers: - Metal: 252 pcs - ...
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 kg dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.
Key data: 3500 KG, 14100 mm, 9850 mm
SSI Schaefer PR600 – 14.10 m | Height 9.85 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage req ...
Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.
Key data: 1800 KG, 75600 mm, 6450 mm
Jungheinrich MPB pallet rack – approx. 75.6 m | Height 6.45 m | Floor + 3 | Second-hand goods With a length of approx. 75.6 m and a height of 6.45 m, this used Jungheinrich MPB pallet rack offers a high-performance heavy-duty rack for industrial storage requirements. The racking system is designed for 324 pallet spaces and impresses as a modular high rack with shelf loads of up to 1,800 kg per level. The combination of galvanized rack frames and painted trusses makes this storage rack the ideal choice for logistics centers, industrial companies and large warehouses. If you want to buy a used pallet rack, you can get a flexible and immediately available industrial rack for the efficient storage of Euro pallets. Customizable to your desired size: The shelf uprights can be individually converted to your desired height – precisely and professionally in our workshop. Contact us ...
Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.
Key data: 3500 KG, 101000 mm, 9850 mm
SSI Schaefer PR600 – 101 m | Height 9.85 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requi ...
Key data: 3500 KG, 30900 mm, 4900 mm
SSI Schaefer PR600 – 30.90 m | Height 4.90 m | Floor + 2 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage req ...
Key data: 2700 KG, 14100 mm, 7500 mm
Jungheinrich Delta – 14.10 m | Height 7.50 m | Floor + 3 levels | Shelf load 2700 kg | Used Pallet rack for sale Used pallet racks from Jungheinrich (Delta system) are a proven solution for efficient, safe warehousing. The heavy-duty racking is suitable for warehouses, industrial and logistics companies that are looking for stable and durable racks for Euro pallets. The Delta system offers high load capacity, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type 512 / 612) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. Produc ...
SSI Schaefer PR600 – 30.90 m | Height 7.50 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racking for Euro pallets. The proven PR600 design offers high payloads, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type P100 / P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. ...
Key data: 2700 KG, 14100 mm, 7500 mm
Jungheinrich Delta – 14.10 m | Height 7.50 m | Floor + 3 levels | Shelf load 2700 kg | Used Pallet rack for sale Used pallet racks from Jungheinrich (Delta system) are a proven solution for efficient, safe warehousing. The heavy-duty racking is suitable for warehouses, industrial and logistics companies that are looking for stable and durable racks for Euro pallets. The Delta system offers high load capacity, flexible configurations and reliable performance in daily operations. Buying used means: tested brand quality at an attractive price – immediately available from stock for new construction, conversion or expansion of your shelving system. Individually adaptable: The shelf frames (frame type 512 / 612) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requirement. Produc ...
Key data: 3500 KG, 101000 mm, 9850 mm
SSI Schaefer PR600 – 101 m | Height 9.85 m | Floor + 4 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage requi ...
Key data: 500 mm, 45 °
The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.
Lamella water sedimentation tank 7000 lt/Hour Stainless steel 304, 4mm thickness
Used equalizer, capacity 4000 liters. - slow-speed agitator - power – 7.5 KW - diameter – 214 cm outside/198 cm inside - tank height – 212 cm, cover – 210 cm
Technical data for the pallet racking system: Shelving system: Arestant Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 16,760 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 03 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 36 pcs. Total pallet spaces: 36 pcs. Note: The visual materials serve to illustrate the material. The quantities shown may differ from the scope of delivery! The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendz. galvanized Profile dimensions: 80 x 70 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 6,005 mm high 800 mm deep 36x Pallet rack trusses, used Material colour: orange Truss Type: M14051 Box profile ...
Manufacturer: Core Link AG Model: CL410-ALU Year of Manufacture: 2010 Type of Machine : Conveyor belt Condition:well preserved // removed without damage Find more here - / Contact us at -
These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible.
Key data: 4 , 240 mm, 130 mm
SPECIFICATIONS: Feed length: 2500 mm Machining width: 240 mm Processing height: 130 mm Spindles: Ø 40 mm Number of Spindles: 4 Shaft drive (2.9 kW) Installed power: 24 kW Voltage: 380 V CONFIGURATION OF THE SPINDLES: I bottom (5.5 kW) II right (7.5 kW) III left with electronic sideshift (7.5 kW) IV top (7.5 kW) EQUIPMENT: Complete with tools
Height=0.84 m, Overall length= 0.64 m, Overall width= 0.6 m, Net weight= 65 kg,
Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 66 kg,
Height=0.395 m, Overall length= 0.53 m, Overall width= 0.49 m, Net weight= 50 kg,
Manufacturer: SPINNER Model: SERVO - LOAD 80 - 1200 Year of Manufacture: 2011 Voltage (U): 3/PE ~ 400 V Frequency (f): 50/60 Hz Input Current (Iᵍ): 5 A Fuse Rating (Iₙ): 10 A Find more here - / Contact us at -
Linpac 150pcs. transport trolleys for Trolley euroboxes underframe 800x600x200 mm 300kg load capacity RA2428 Technical data: Length: 800 mm Width: 600 mm Height: 200 mm Load capacity: 300 kg for two paralell euroboxes Material: stable plastic body Underride height: approx. 100 mm Weight: approx. 9.1 kg Configuration: 2 steering and 2 fixed castors Purchase quantity 150, 10 stacks, 15pcs. each L x W x H approx. 800 x 600 x 2270 mm Total weight per stack: approx. 136.5 kg Year of manufacture: unknown Stackable: yes, through cutouts Condition: Used / fully functional Color: red Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Height in mm: 200 Width in mm: 600 Länge in mm: 800 Traglast kg: 300 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and impleme ...
maximum number of results exceeded
please refine your search
