130,507 used machines on RESALE, but how to find them? Machine Search
Slicing device for biscuits Cutting - Leo adjustable with inlet shaft Tabletop device made of stainless steel Output up to approx. 2000 rolls Adjustable cutting height for cut-through pastries Baked goods max. 160 x 80 mm, WxH DGUV V3 tested Connection 230V, ready to plug in Approx. dimensions: 800 x 440 x 470mm, WxDxH Used machine overhauled 3 Months Warranty + Service Package Optional: Driving table for LEO Maintenance contract More TOP bakery machines in stock!
Wartsila L32 Connecting rods 8 Pcs available from stock From our Istanbul stock Reports available Tested for cracks and ovality In good condition
Listing ID: 22693 Brand Engine: Doosan Model: L126 TIM Power: 400 PS (294 kW) RPM: 2100 General condition: Very low hours only test hours Features: Flywheel housing: SAE-1 Flywheel: 14 inch Starter: 1 x 24V Governor: Mechanical Exhaust system: Water cooled Turbo: Water cooled Cooling system: H-E cooled Weight: 1060 kg Dimensions (cm) 150x90x130
2615157 Layher Cushion Bar 1,57 brewed approx. 2000 pieces available Also available Layher Cushion Bars 1.09 and 1.40 Complete stock list original Layher on request
KHS/ALFILL ULTRACLEAN RINSER-FILLER-CAPPER Model: linefill CP48-16-8, Year of make: 2003 Capacity: 6000 bottles per hour Bottle volumes: 1000 ml, 750 ml, 500 ml, 330 ml, 250 ml, 200 ml Format change time: 15 minute USED SLEEVER CLEVER USED SHRINK TUNNEL USED ACCUMULATION CONNECTION AND EXIT CONVEYOR SYSTEM
Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...
Table milling machine, table milling machine -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg
Slotted disks, window milling tools, indexable inserts, window construction tools -Slit disk milling tool for: wooden windows -ZUANI LOGIFIX -Socket: Ø 50 mm -Weight: 6.8 kg
Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new
Loading aid AHLBORN, type: Liftmatic for double width - Up and down movement automatically - 6 seconds from bottom to top - Manual loading - Condition: Very good - Speed: 15 cm/sec
Control cabinet - cooling device, distribution cabinet -Control cabinet: fan -Number: 2x fan available -Price: per piece -Dimensions: 240/240/H115 mm -Weight: 1.3 kg
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Type: LCDQ 20/40 -Quantity: 2 pieces available Unit price: 30 plus VAT. -Weight: 0.3 kg
Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Bridgestone, J-Lug tire with inner tube -Tire size: 7.50-15 -Quantity: 1 tire available -Dimensions: Ø 775 x 185 mm -Weight: 37 kg
Standpipe valve 1 1/2 for wash basin -Basin depth: 200 mm -Water level: 170 mm -Number: 14x available -Price: per piece -Weight: 0.3 kg
Brand: KOMAR/ BK TECHNOLOGIES Total dimension L: 11000 Electric connection: 380 Total dimension H: 1900 Total dimension W: 1500 complete baking line; Productivity up at 400kg/hour for 100g formats; 50g sandwiches to 300g; Manual ingots loading, automatic panning; composed of ribbon input; 3 height-adjustable rolling mills; floury; 1 cutting unit with 1-5 ways/carpet flour recovery; webbing tape dough advancement; cutting group transversal; counter-rotating moulder belt; tear-off trolley tape and collection tape and in chin baking tray; exit plate
Standpipe valve 1 1/2 for washbasins -Bowl depth: 150 mm -Water level: 120 mm -Quantity: 15x available -Price: per piece -Weight: 0.3 kg
with 5 Bitzer compressors Make: BITZER Type: 6G-30.2Y-40P Displacement: 153.1 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
with 3 Bitzer compressors Make: BITZER Type: 6H-25.2Y Displacement: 133.3 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Composite system with 1 Bitzer compressor Make: BITZER Type: 4G-20.2-40P Displacement: 102.1 m³/h with 1 Bitzer compressor Make: BITZER Type: 4GE-23Y-40P Displacement: 102 m³/h and with 1 Green Point compressor Make: Green Point Type: 4G-20.2Y-40P Displacement: 101 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Light source: 1 0 voltage: 24VDC V Capacity: 13 Watt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D09M7C -Number: 7x contactors available -Price: per piece -Dimensions: 80/45/H90 mm -Weight: 0.3 kg/pc.
new
KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3
Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.
Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: 240/75/H75 mm -Weight: 2.2 kg
Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg
Cutter Manufacturer: Alpina Made of stainless steel Volume: 200 liters
hydrodynamic fluid coupling, centrifugal coupling, rubber disc coupling, claw coupling, connecting coupling -Manufacturer: Lenze -Type: KD 3922656 Size S 08 -Outer diameter: 470 mm -Shaft mount: Ø 65 mm -V-belt pulley: 7-groove SPB 230-7 (17 mm) -Dimensions: Ø 470 x 350 mm -Weight: 76 kg
Aseptic Tetra Pak Filling Line – A3/Flex 150V (250 ml Prisma) High-quality aseptic carton filling line designed for efficient packaging of liquid food products in 250 ml Prisma cartons. The line is equipped with reliable Tetra Pak equipment and features low operating hours, making it an excellent solution for beverage and dairy producers seeking dependable aseptic packaging capacity. Line Configuration - The filling line consists of the following equipment: - Tetra Pak Filling Machine – A3/Flex 150V - Tetra Pak Accumulator – ACHX 10/35N - Tetra Pak Straw Applicator – TSA21 - Tetra Pak Film Wrapper – TFW67 - Tetra Pak Filling Machine - Core aseptic filling unit for 250 ml Prisma cartons. Technical Specifications - Manufacturer: Tetra Pak - Model: A3/Flex 150V - Year of Manufacture: 2008 - Package Volume: 250 ml - Package Format: Prisma - Capacity: 9,000 pac ...
Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73
60 m pallet rack Bito P5 Used goods very good condition, see pictures. Height 4.5 m Depth 110 cm, galvanised Bay load 16000kg Strap length 3.6 m blue Carrier with Load / Compartment 4000 kg Negotiation price: € 3.950,-- net from stock Offer consists of: + 17 frames pre-assembled, depth 110 cm, height 4.5 m + 64 beams, length 3.6 m, 4000 kg load/compartment +128 pcs Suspension Devices + 68 pcs concrete anchors Used corner protectors immediately available, surcharge per piece 15,- € net! Other accessories such as clamping plates, insert grids, etc. on request. Payload signs, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pal ...
Leonhardt AG2 Twin head dosing machine Serial: 1401449 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph
Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping bolt with T-slot nut -Bolt: Ø 27.5 mm -T-nut: 35/54 mm -Dimensions: Ø 100 x 700 mm -Weight: 5.5 kg
Machine reamers, reamer, reaming tool, locating knife cutting set -Manufacturer: Loewe, adjustable machine reamer -Diameter: Ø 26 mm -Recording: MK1 -Dimensions: Ø 26 x 290 mm -Weight: 0.6 kg
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
318 m pallet rack Bito P5 Used goods very good condition, see pictures. Height 9 m Depth 110 cm, galvanised Bay load 16000kg Strap length 3.6 m blue Carrier with Load / Compartment 4000 kg Negotiation price: € 36.950,-- net from stock Offer consists of: + 87 pcs frame pre-assembled, depth 110 cm, height 9 m + 688 beams, length 3.6 m, 4000 kg load/compartment +1376 pcs Hook-in safety devices + 348 pcs concrete anchors Used corner protectors immediately available, surcharge per piece 15,- € net! Other accessories such as clamping plates, insert grids, etc. on request. Payload signs, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metre ...
I offer for sale an unused and completely original packaged industrial shelf SSI Schaefer LTR600. The shelf was originally ordered for a project, but never assembled. All components are in new condition and are completely present. Technical data • Model: SSI Schaefer LTR600, single-sided longitudinal vertical shelf • Overall length: 39.3 m • Height: 7.6–8.1 m • Depth: 800 mm • 14 fields, each with a clear field width of 2,700 mm • 7 levels per field • Per level: 4 depth pads type UN Scope of Delivery • Complete shelf line LTR600 • All stud frames (7.6–8.1 m, orig.) • All trusses (2.7 m) • All depth pads type UN • Small parts & fasteners • Original SSI Schaefer packaging Condition • New • Never set up • Original packaging • Complete Logistics / Pick-up • Location: Fellheim (Bavaria) • Longest components: 7.6 ...
Key data: 220 KW, 274 kVA, 400 V
gebr, emergency power generator in the container
maximum number of results exceeded
please refine your search
2.500 € 
