hauser l kellenberger used for sale

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool radius: 3 mm -Thickness: 25/6 mm -Total length: 572 mm -Overall height: 192 mm -Weight: 16 kg

Stock # UG6362 Used fully design in stainless steel 316L chamber bowl type, hi-speed centrifuge made in China, type GQ115. Working rotation of bowl up to 16300 rpm with 17000 G-force. Total volume of bowl is 7 l. Centrifuge has bottom inlet and top discharge outlet. Bowl is belt driven by ele. motor 3 kW, 2880 rpm, 380 V, 50 Hz. Machine is equipped with an electric control panel, tools, concrete pedestal. Overall dimensions: length 900 mm, width 900 mm, height 1600 mm, weight 490 kg.

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool for: closing folds -Thickness: 25 mm -Total length: 470 mm -Overall height: 195 mm -Weight: 18 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 60° -Thickness: 25 mm -Total length: 1570 mm -Lengths: 75/75/120/120/590 mm -Total height: 246 mm -Weight: 44 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool radius: 10 mm -Thickness: 20mm -Total length: 471 mm -Total height: 188 mm -Recording width: 80 mm -Weight: 19.8 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

Bending tool, die, upper blade, upper tool, straightening tool -Handover in its current condition as inspected -Tool for: Press brake -Tool: 88° -Thickness: 25 mm -Total length: 1009 mm -Lengths: 879/130 mm -Total height: 162 mm -Weight: 26 kg

Used Helpman LEX 26-E evaporator on Freon with electric defrost. Complete with 3 ATB RFT0,25/4-7 fan - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 457 mm and a total airflow of 14.000 m³/h. Brand: Helpman Type: LEX 26-E kW: 22,8 Refrigerant: Freon Number of Fans: 3 Fin Space in mm: 7 Defrosting: Electric m³/h: 14.000 Sizes: 2650x740x670 mm (LxWxH) Volume: 30,9 dm³ Weight: 159 kg Amount in stock: 6

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 82° -Thickness: 25 mm -Edge length: 1039 mm -Total height: 162 mm -Weight: 26 kg

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.18 kW -Speed range: 81-485 rpm -Motor: adjustable -Drive shaft: Ø 14 mm -Construction: B3 -Number: 1 piece of motors available -Price: per piece -Dimensions: 365/200/H190 mm -Weight: 19 kg

Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg

Connector, plug, sensor module, G2 flat module -Manufacturer: Lumberg -Type: 0976 PFC 101 -Number: 10x plugs available -Price: per piece -Weight: 0.06 kg

Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool: 88° -Edge length: 100 mm -Overall height: 149 mm -Weight: 3 kg

Geared motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 109 rpm -Shaft: Ø 25 mm -Design: B3 angle -Protection class: IP 55 -Quantity: 1x motor available -Dimensions: 490/230/H170 mm -Weight: 22.6 kg

LBBC Steam Autoclave Max. working pressure 100psi Max. working temperature 200degC Double ended Steam Operation Double doors at both ends Dims 40” (3ft) diam. x 92” (7ft.6”) long Safe work pressure 7.59 bar Vessel type 95/23 With boiler

Electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: EX -Number: 3x available -Price: per piece -Dimensions: 470/360/H300 mm -Weight: 75 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Max. speed: 3000 rpm -Torque: 1.9 Nm -Power: 0.6 kW -Shaft: Ø 19 mm -Design: B5 -with NIKKI-DENSO-Encoder-E2-1-2000-PR -Number: 5x stepper motors available -Price: per piece -Dimensions: 290/120/H180 mm -Weight: 11.4 kg

Three-phase motor, electric motor -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm -Construction: B3 -Protection class: IP 23 -Dimensions: 860/640/H580 mm -Weight: 390 kg

Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg

The Posimat PB 80 is a pneumatically operated handling device. Version : with counterweight, suspended from on-site steel construction. Specifications: Load capacity: 120 kg; Hub; 1,600 mm; working range (radius) 2,600 mm; dead weight without counterweight and column: 150 kg The device was only in use for a few months.

electric motor, three-phase motor -Engine: is unused -Power: 55 kW -Speed: 2950 rpm -Shaft: Ø 60 mm -Design: B3/B5 -Protection class: IP 54 -Dimensions: 860/680/H550 mm -Weight: 366 kg

Three-phase motor, electric motor, geared motor -Power: 3kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Number: 1x available -Dimensions: 460/260/H335 mm -Weight: 42.8 kg

Sensor module, G2 flat module -Manufacturer: Lumberg -Type: ASBS 8/LED 5-4 -Number: 3x available -Price: per piece -Weight: 0.26 kg

Servo drive, servo converter, output module, card, input processor, power supply unit, control card, input card, controller -Manufacturer: Lenze -Type: 9114 B -ART.-No.: 331073 -Servo drive -Number: 2x control cards available -Price: per piece -Dimensions: 350/120/H300 mm -Weight: 6 kg

Gear motor, electric motor -Speed: 75 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 250/160/H120 mm -Weight: 4.75 kg

Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 1/4 -Number: 5 pieces available -Price: per piece -Dimensions: 80/80/H190 mm -Weight: 0.7 kg

Hitachi LaChrom L 7485 Fluorescence Detector Excitation 200-850 nm Emission 250-900 nm Autozero analytical flow cell

Gear motor, electric motor -Speed: 194 rpm -Power: 0.75 kW -Construction: B3 -Diameter hollow shaft: Ø 24 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 430/150/H200 mm -Weight: 15 kg

Gear motor, electric motor -Speed: 35 rpm -Power: 0.75 kW -Construction: B3/5 -Diameter shaft: Ø 40 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 660/235/H280 mm -Weight: 66 kg

Electric motor, three-phase motor with 2 speeds -Power: 1.6/5.5 kW -Speed: 1445/2880 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: -pole changing -Number: 1x available -Price: per piece -Dimensions: 410/350/H300 mm -Weight: 48 kg

Perkin Elmer Lambda 25 UV VIS Spectrophotometer, Dual-beam device, wavelength range 190-1100nm, 10 mm or 100mm cuvette holder, Option flow-through cuvette with peristaltic pump, Software Perkin Elmer WinLab

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg

Three-phase motor, electric motor with 2 speeds -Power: 1.25/4.2 kW -Speed: 970/1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -pole changing -Dimensions: 440/350/H265 mm -Weight: 62 kg

Propeller mixer Manafacturer: Lightnin Type: HP-18 ID: W40608 Power: 0.18 kW Gearbox: Brook Crompton Parkinson Motors with claw (for attachment to the vesssel) with start-stop control LWH: 250 x 150 x 950 mm

Dissolver mixer Manufacturer: Loher GmbH Type: eA132SA-61 Power: 2.6 kW Diameter dissolver disc: 350 mm in EEx Protection Speed: 960 rpm LWH: 400 x 400 x 1700 mm

Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg

Propeller mixer Manafacturer: ABB Propeller blade diameter: 250 mm in EEx Protection LWH: 300 x 300 x 800 mm

Hitachi HPLC System LaChrom Elite -Power Box -L 2130 Gradient Pump -L 2300 Column Thermostat -L 2200 Autosampler (cooling) -L2455 DAD Diode Array Detector

Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2965 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: - -Dimensions: 810/550/H440 mm -Weight: 340 kg

Technical data of the used Lisse Z4-30 calender: Upper roller diameter: 230 mm Diameter of lower rollers: 170 mm Machine dimensions: 4800 x 1250 x 1300(h) mm

Package sale of electrical and electrical parts 2x Beckhoff, monitors, type C3640, used 1x Beckhoff Contropanel, type CP7031-0002, used 1x Bosch-Rexroth, Indrat View P19, BTV, used 7x INAT, Echolink 100, used 27x Lumiflex, Passive Mirror, 0-4m, used 10x Lumiflex, Passive Mirror, 0-8m, used 5x Lumiflex, type Areal Transmiter AT-500/2, used 4x Lumiflex, Electronic, used 4x Lumiflex, Light Curtain Electronic, used 4x Siemens S5, used 12x Klöckner-Moeller, fuse disconnector, type GSTa 1, new 8x Klöckner-Möller, fuse socket, PS33/cohlzahl 3, 63A, 660V, New 1x Hydrocompensator, hk 5000 1x Siko Seiki, STP control, Unit STP -300C 1x Sony Monitor

Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg

Vehicle data: Make: Linde, Type: Door LIN3944379144, Year of manufacture: 0, Internal number: DIV1344, Mast data: Dimensions: Battery & charger: Description & special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: