hauser l kellenberger used for sale

9,55 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 9,55 m Shelf offer consisting of: 06 x frame approx. 200 x 80 cm, disassembled. 40 x traverse approx. 185 cm. 20 x support shelf approx. 184.5 x 79.5 cm. 40 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1242,00 € net plus legally valid VAT You will receive an invoice with VAT.

7,65 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 7,65 m Shelf offer consisting of: 05 x frame approx. 200 x 80 cm, disassembled. 32 x traverse approx. 185 cm. 16 x support shelf approx. 184.5 x 79.5 cm. 32 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1001,00 € net plus legally valid VAT You will receive an invoice with VAT.

5,75 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 5,75 m Shelf offer consisting of: 04 x frame approx. 200 x 80 cm , disassembled. 24 x traverse approx. 185 cm. 12 x support shelf approx. 184.5 x 79.5 cm. 24 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 709,00 € net plus legally valid VAT You will receive an invoice with VAT.

3,85 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 80 cm, disassembled. 16 x traverse approx. 185 cm. 08 x support shelf approx. 184.5 x 79.5 cm. 16 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 519,00 € net plus legally valid VAT You will receive an invoice with VAT.

1,95 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 1.95 running metres Shelf offer consisting of: 02 x frame approx. 200 x 80 cm, disassembled. 08 x Traverse approx. 185 cm. 04 x Contact back approx. 184.5 x 79.5 cm. 08 x beam / load distributor Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 278,00 € net plus legally valid VAT You will receive an invoice  ...

Used and in very good condition Alfa Laval BCD E905BD P SW CBP air cooled condensor. Complete with 10 fans from Ziehl-Abegg designed for 60ºC, 50/60 Hz - 0,68 kW - 570 RPM - diameter Ø 910 mm. Capacity at delta 598,8 kW and 169.200 m³/h. Capacity at Y 519,5 kW and 135.400 m³/h. Specifications: Our internal stock No. 12244 Brand Alfa Laval Type BCD E905BD P SW CBP Product type Air Cooled Condensor kW 598,8 (Freon) Number of Fans 10 RPM of the Fans 570 Air Flow in m³/h 169.200 diameter fans Ø 910 mm Surface (m2) 2.286 Tube volume 200,5 dm³ Sizes 9230x2300x1400 mm Weight 1.662 kg Remarks | y.o.b. 2016 Amount in stock 1

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Three-phase motor, electric motor -Power: 5.5 kW -Voltage: 400/690 V -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP55 -Dimensions: 450/260/H330 mm -Weight: 43 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 60 mm -Piston rod: Ø 35 mm -Flange: Ø 69 mm -Recording thread: Ø 22 x 2 x 30 mm -Stroke: 900 mm -Dimensions: 1090 x 100 x 100 mm -Weight: 17 kg

Plummer Block Housings, Plummer Block Housings -Hole center height: 40/Ø 10 mm -Base plate: 145 x 95 mm -Price: per piece -Number: 2 pieces -Dimensions: 145/95/H approx. 65 mm -Weight: 1.3 kg

Electric motor, three-phase motor -Manufacturer: Himmelwerk, electric motor type 2 LF12 / 5.5 -Power: 1.1 kW -Speed: 2780 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Dimensions: 250/180 / H270 mm -Weight: 10 kg

weight of the machine ca.: 14,2 kg dimensions of the machine ca.: 22 x 24 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor, pump motor -Manufacturer: Linn Pumps, pump motor without pump -Type: TP 80E -Power: 0.75 kW -Speed: 2900 rpm -Shaft: Ø 16 x 20 / 18 x 40 mm -Design: B3/B14 -Protection rating: IP54 -Dimensions: 328/157/H190 mm -Weight: 11.3kg

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks, 15-piece set: soft jaws -Hole spacing: 44 mm -Width: 28 mm -Various versions available: see photos, more pictures can be sent upon request -Price/Sale: only complete set -Overall dimensions: 470/180/H80 mm -Weight: 8.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 54 mm -Width: 45 mm -Dimensions: 135/120/H30 mm -Weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 40 mm -Width: 30 mm -Dimensions: 120/90/H80 mm -Weight: 3.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 160/190/H110 mm -Weight: 3,3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: soft jaws, aluminum -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 135/170/H80 mm -Weight: 1.8 kg

Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.

voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: HEW type EEXF 132S/2 -Motor power: 4.6 kW -Speed: 2880 rpm -without: housing -Impeller outside: Ø 415 mm Sheet metal plate hole circle: Ø 470/13 mm -Dimensions: Ø 500/595 mm -Weight: 68 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB12 BL: control unit -LUB12: basic device -Price: per piece -Number: 27 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

bar material dia.: 65 mm bar length: 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...

Flow meter, vibration measurement, display device vibration measurement, monitor display -Manufacturer: Lorenz, measuring amplifier -Type: GM40 -Price: per piece -Number: 5 piece -Dimensions: 75/20/H110 mm -Weight: 0.1 kg/piece

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: Leoni, fiber optic cable -Type: Gigaline AT-V/ZN) HH 4G50/125 -Length: 130 m -Price: complete -Dimensions roll: Ø 500 x 340 mm -Weight: 13 kg

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

Metal band saw blade, band saw blade, metal saw band -Metal saw band: unused -Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR -Weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 180/200/H90 mm -Weight: 3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: soft jaws, aluminum -1 movement: hard jaws -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 310/390/H110 mm -Weight: 18.7 kg

Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -Manufacturer: Schneider, control module -Control unit: LUCA 12BL -Base device: LUB12 -Dimensions: 170/45/H125 mm -Weight: 0.9 kg

Gear motor, electric motor, three-phase motor, electric gear motor -3 phase motor voltage: 42/50 V -Power: 0.12 kW -Speed: 25/30 rpm -Construction: B3 angle -Hollow shaft: Ø 19 x 35 mm -Protection class: IP44 -Dimensions: 390/200/H185 mm -Weight: 19 kg

Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

The depacker enables the unpacking of bottles from the shrink film. PLC SIEMENS S7-300. Output: up to 4 bundles/min.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Langen, hydraulic cylinder type ZD 63/150 -Stroke: 150 mm -Cylinder: outside Ø 75 mm -Piston rod: Ø 45 mm -Mount: hole circle Ø 69 mm -Dimensions: 345/140 / H95 mm -Weight: 11 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL, Hydraulic cylinder, tilting cylinder, stroke 1590 mm -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Dimensions: 1895/90/110 mm -Weight: 19.5 kg

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCA 1XBL: control unit -LUB12: basic device -Price: per piece -Number: 3 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Hydraulic pump, oil pump, gear pump -Manufacturer: Garbe Lahmeyer, pump from radial drilling machine Kolb NKR 55 -Type: AV15 / 15 P -Power: 0.6 kW / 1390 rpm -Dimensions: 420/280/180 mm -Weight: 24 kg

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, Control box, burner control -Manufacturer: Landis & Staefa, automatic burner control unit -Type: LMG22.130A27 -Dimensions: 90/60/H60 mm -Weight: 0.2 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4M+ -Voltage: 110 V -4 sockets: remote controllable -Incl. Accessories: see photo -Dimensions: 220/260/H55 mm -Weight: 1.5 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -LTi REENERGY: Controller E230 G360/1,2 BWrg-CFpux -Power: 1.2 A -Input: 230 V AC 4.5 A -Output: 360 V DC 1.2 A -Price: per piece -Number: 3 pieces -Dimensions: 300/150/H110 mm -Weight: 3.7 kg/piece

electr. Clutch brake, clutch brake combination -Manufacturer: Lenze, clutch-brake combination -Type: Simplatrol 14.113.08.1 = 24 V/15 W/77/40/VDE 0560 -Voltage: 24 V/15 W. -Dimensions: 135/155/235 mm -Weight: 4.5 kg

Max. width of cutting: 530 mm The temperature of the meat block: up to -25 C The Control panel mounted on the machine Installed power: 32 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 200 Length: 190 Height: 210 Delivery time: 30 working days after advanced payment