133,560 used machines on RESALE, but how to find them? Machine Search
Centrifugal pump Manufacturer: Alfa-Laval (Sweden) Type: ME-155AE N°: 31452-695 Capacity: 30,000 l/h (water) at 28 m height very good condition LWH: 830 x 300 x 450 mm
Pump Manufacturer: Lowara (Italy) Type: HTS 32-125 N°: 90 Power: 3 kW Flow rate: 12-33 m3/h at 26-18.8 m height (water) LWH: 600 x 300 x 360 mm
used
Rotary piston pump Manufacturer: Ledele GmbH Type: KRL65PN Built: 1998 Engine power: 2.2 kW Gearbox: Stöber speed-controlled Mobile very good condition LWH: 1200 x 600 x 620 mm
Key data: 16 KW, 20 kVA, 230 V
Made in the EU 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-P2016 Prime Rating: 20 kVA / 16 kW Standby Rating: 22 kVA / 17.6 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Make: Perkins Motor Model: 404A-22G1 Bore x Stroke (mm): 88 x 110 Displacement (L): 2,216 Compression Ratio: 23.3:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions of the unit: Length: 1600 mm Width: 650 mm Height: 1250 mm Weight open: 560 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-co ...
Leroy Somer LSA 461 M3 - Used - 150 kVa - Generator End
Technical data for the light raverse: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Longitudinal bandage, used Designation: BL 3 Overall length: 1,310 mm Profile dimensions: L 42 x 44 mm Material colour: sendzimir galvanised Note: for use in PR 600 & WR 600 shelf stands in Connection with R3000 shelves Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Fixed and walking lunettes for FAT Poles TUR 560 and TUR 630
Key data: 60 KW, 75 kVA, 400 V
ON HAND 30 months warranty WEG Alternator DEIF Module Generator Set Specifications: Model No.: EQ-H7560 Emergency power output: 75 kVA / 60 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine manufacturer: Hyundai Engine Model: SP344CC Charging: Turbocharging & Intercooler Fuel System: Series Injection Regulator Type: Mechanical Generator set dimensions (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight open: 1140 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Generator ABB Circuit Breakers Protection system in manual operation Flexible oil hoses and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank integrated into the chassis Industrial Silencer Electronic Battery Charger Elect ...
Galletti LCX082CSG Water chiller Serial: 16701165 2016, four fan system, adjustable temperature controls, see plate for all spec, 3Ph
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,480 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Pallet rack stand, used Material colour: sendzimir galvanised Frame Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 2,100 mm high 800 mm deep 06x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,295 x 790 x 40 mm Weight | Pcs.: approx. 12.82 kg 04x Light traverse, used Designation: BL 3 Overall length: 1,310 mm Profile dimensions: L 42 x 44 mm Material colour: sendzimir galvanised 20x Freestanding partition walls, used Total depth: 765 mm Total height: 315 mm Usable height: 275 mm Material th ...
Used checkout counter from Potrafke, left and right, good condition. Length: 300 cm Width: 140 cm Height: 88 Treadmill, approx. 128 x 45 cm Fabric tray, approx. 130 x 76 cm sawn recess (corner pillar cut-out) in the fabric tray, approx. 48 x 44 cm right-handed Taxiway Power connection: 230 V / 50 Hz without POS hardware, expansion parts and scanner We would like to point out that with regard to the Product Safety Regulation, the product offered here is intended exclusively for commercial use. An assignment by consumers within the meaning of § 13 BGB is to be excluded. We will be happy to send you more photos and information. Please also note our other advertisements. In addition, you will find more new and used checkout counters, used and new store shelves in various sizes on our homepage. Paints, fruit and vegetable displays, shopping trolleys and baskets, action ...
ID3595 Liebherr LH50 M Litr. year/Baujahr 2015 8.900 hours/hours Industrial monoblock boom, straight 9.60 m, industrial stick, stick end sharply angled 7.50 m with hydraulic quick coupler, medium-pressure circuit, grab lines, VarioLiftPlus 2A, active lowering of the lifting cylinder, support: rear and front outriggers, single tires, 16.00-25, protection for piston rods, outriggers and piston rods rear and front, GTS 13 kW generator system, hydraulic, LHC 255 cab elevation, magnet system, push button on the right joystick, various grabs are also available on request Industrial monobloc boom straight 9.60 m, industrial stick, stick end strongly angled 7.50 m with hydraulic quick coupler, medium pressure circuit, grab lines, VarioLiftPlus 2A, lifting cylinder actively lowered, support: claws at the rear and front, single tyres, 16.00-25, protection for piston rods, claws and piston rod ...
Trailer open box with charger Ab. Total weight 2,700 kg Loading area internal dimensions approx. LxW 4,100 x 1,840 mm Galvanised steel frame construction with aluminium side wall flaps, loading floor made of screen printing plates, 4 "VarioSave" load securing trusses integrated in the floor, also for use with VarioSave insertion stanchions (2 pcs included). Further lashing eyes on the left and right of the vehicle floor as well as net hooks mounted on the outside of the side walls. 2 BPW rubber spring axles 1500 kg, tyres 195/50 R13 C on steel rims, renewed in 2024. Technical inspection until 12-2026 Equipment: electro-hydraulic on-board crane Maxilift 180.D3E, 3 extensions hydraulic, 1 extension manual, with crane hook, max. load capacity 990 kg, on 2.14 m 800 kg, on 3.06 m 550 kg, on 4.00 m 420 kg, on approx. 5 m 280 kg. Crane operation electrohydraulically for loading arm lifti ...
Belt grinding machine for wood & metal, roller spacing approx. 3000 mm
6,930 liters of cream tanks / cream tanks with V2A agitator insulated Properties: Volume 6930 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Insulation 80 mm Total height 2500 mm Cylinder height 1250 mm Inner diameter 2600 mm Outer diameter 2760 mm Number of feet 4 Vertical design Description: Topsoil: Cone base 2 x crane eye Threaded Sockets 2 x CIP Ball Manhole Ø 510 mm Agitator motor with reinforcement profiles Ventilators Tank cylinder: Paddle agitator Dip shaft sleeve for temperature display Subsoil: forward-drawn residual drain pipe with disc valve 4 feet with dome height adjustable
This control is for sale. Never used and never built in. Stock! See pictures Sale only EU !
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 5,270 mm Number of fields per row of shelves: 04 pcs á 1,280 mm Number of levels plus ground level: 06 pcs. The scope of delivery includes: 05x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 24x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,280 x 775 x 40 mm Weight | Pcs.: approx. 11.68 kg 02x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised 01x Load Shield with information on field and compartment loads, Manufacturer and commission number Dimensions: 297 x 210 x ...
Separator built on a stainless steel skid, with supply pump, discharge pump, sludge pump, circulating tank, stainless steel lines and valve, wired with switch box. For cleaning polluted water. Large water phase, small light phase and dirt phase. No! Emptying machine ! Must be opened for cleaning. Time: approx. 5 min. Ready for use. For more questions, please email.
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 3,960 mm Number of fields per row of shelves: 03 pieces of 1,280 mm each Number of levels plus ground level: 06 pcs. The scope of delivery includes: 04x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 18x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,280 x 775 x 40 mm Weight | Pcs.: approx. 11.68 kg 01x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised 01x Load Shield with information on field and compartment loads, Manufacturer and commission number Dimensions: 297 ...
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,650 mm Number of fields per row of shelves: 02 pieces of 1,280 mm each Number of levels plus ground level: 06 pcs. The scope of delivery includes: 03x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 12x shelf, used Material colour: sendzimir galvanised Dimensions: 1,280 x 775 x 40 mm Weight | Pcs.: approx. 11.68 kg 01x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised 01x Load Shield with information on field and compartment loads, Manufacturer and commission number Dimensions ...
Gluing machine Hunkeler LAM 500; good condition; cleaned and tested; Working width 500mm; Cold glue; Hot glue is prepared, can be retrofitted. Gluing machine Hunkeler LAM 500; good condition; cleaned and checked; working width 500mm; used for cold glue; option for hot glue installed.
We can offer a complete French fries production line which manufactured by K&K,Netherlands in 2012, capacity is 1500kg/h. stopped,working condition, serious buyer cOntact us.
Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields per row of shelves: 01 pcs á 1,280 mm Number of levels plus ground level: 06 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 06x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,280 x 775 x 40 mm Weight | Pcs.: approx. 11.68 kg 01x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised 01x Load Shield with information on field and compartment loads, Manufacturer and commission number Dimensions: 297 x ...
Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm
Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 25,200 mm Number of fields per row of shelves: 09 pcs á 2,700 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 81 pcs. Total pallet spaces: 81 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 10x Pallet rack stand, used Material colour: sendzimir galvanised Type: M Profile dimensions: 90 x 75 x 1.80 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 2,000 mm high 1,000 m ...
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Leicht Stanzautomation GmbH Type: PW-170-E Year of Make: 2007 Weight: 650 kg Compressed air: 6 bar Connected loads: 3x 400V/PE/3x16A Frequency: 50/60 Hz Load capacity: max. 2000 kg Speed: max. 20 m/min Winding plate Ø: 1700 mm All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 180 Connection voltage 1 x 230 volts Adjustment range 20 - 170 amperes Switch-on time 25% ED at 170 amperes 60% ED at 130 amperes 100% ED at 115 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 140 x 230 mm Weight 5 kg Age 12 months Condition workshop-tested, very good, as new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 piece mains plug 230 V, ful ...
Machine type Electrode inverter welding rectiveror Make Merkle Type LiteARC 160 Connection voltage 1 x 230 volts Adjustment range 15 - 160 amperes Switch-on time 25% ED at 150 amperes 60% ED at 90 amperes 100% ED at 80 amperes Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 12 months Special accessories Carrying strap Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of lens 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2-row 1 ...
Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment
Used lab lyophilizer LyoQuest -55 ECO. YOM 2016. Available 2 pcs.
Used line for packing powdered products Chronos. Powdered products are packed in four-layer paper bags with a polyethylene insert of 25 kg net or BIG-BAG containers with a capacity of max 1000 kg. Packing in 25 kg bags takes place on an automatic Chronos packing machine. The packing machine automatically weighs, seals the polyethylene bag and seals the paper bag.
Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Truss Type: TRV1-290-124-30 CE Box file: 120 x 40 mm Agraffe: 5 HK (hooks) Clear width: 2,900 mm Max. load per pair of trusses 3,100 kg, with the same weight. Distributed load 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Leybold Turbovac TMP 600C with CF DN160 inlet flange.
Manufacturer Düchting Type centrifugal pump LHK 125x5 Unused / Refurbished Flow rate 180 m3/h Head 150m Step number 5 Weight approx. 550kg Special price
Used freeze drying lyophiliser made by Edwards. Used freeze drying unit with 8,4/6,72/5,04 m2 total shelf-surface for drying product in flasks 55 mm diameter and 100 mm hight. Technic based on the plant 5,04m2. 10/8/9/6 shelves 800x1050mm and one radiation shelf, shelf interdistances 75/94/125 mm. Shelf temperature -50/-48 C /+70 C. Ice capacity 100 kg. Ice condenser temperature -75 C. Chamber and ice condenser in details made of stainless steel 1.4541 / AISI 321. Two refrigeration system with two stage compressors and watercolled freon condenser, compressors DWM-Copeland, freon R502.
LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz ...
LS6/4 knotted mesh production machine was built in 2006 in Poland by Maszyny S.C. The machine enables the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. Technical specifications of the LS6/4 fixed knot fence production line - type of produced net: L, M, S, SL - maximum height of the produced net: 200 cm - vertical wires spacing: 15 or 30 cm - number of horizontal wires: 25 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa
maximum number of results exceeded
please refine your search
