135,966 used machines on RESALE, but how to find them? Machine Search
Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes
P135 - used approx. 46 m³ / 46,000 litres polyester tank, GRP tank, aboveground, on 2 steel bases, in good condition. technical details: capacity: approx. 46 m³ / 46,000 litres material: polyester tank / GRP tank manufacturer: Reich Tank specific gravity: 1.3 kg/L dimensions: approx. length 6.5 m x Ø 3.0 m x 3.4 m overall height other: Maximum operating temperature 95 degrees, used and in good condition, aboveground storage tank, lying horizontally, includes 2 steel bases. Lid and several ports on the top of the tank body, DN100 connection the front side, see photos. The tank will be repainted by us. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the ta ...
Condition: Very good condition Available: Immediately
Make: LDF LONGONI, plug-in ready Height: 190 cm - with integrated refrigeration unit, refrigerant R404A - with shelf (5 pcs.)
<b>Properties:</b> Used pallet roller conveyor Material: Steel (galvanized) Color: Silver Expertly disassembled and packed Modular system for the conveying of Euro pallets The facility consists of 103 segments: 91 piece x 2.495 mm 12 PCs x 2,390 mm <b>technical data</b> Pallet roller conveyor dimensions approx. Total width: 915 mm Width: 850 mm Length: 105mm Rolling cross section: 60 mm Material: Steel Profiles: 80 x 30/40 per segment there are 4 brake roller Roll diameter: approx: 80 mm <b>Pallet roller conveyor</b> Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination. <b>Tailor-made solutions for your intralogistics</b> We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to t ...
Storage Tanks/ Pressure Tanks 16.000 liters horizontal in V2A Tank with vaulted bottoms wallthicknesses: bottoms 11,5 mm, jacket 8 mm material: V2A - AISI 304, 1.4541 On tank crest: - vent pipe NW 40 On the torispeherical bottom: 1 manhole 460 x 360 mm -1 spout DN 50 -1 outlet spout DN 50 otherwise acc. photos Measurements and weight: Diameter: approx. 2400 mm Length of cylinder: 2650 mm Total length: approx. 4000 mm Weight: approx. 2859 kg
Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...
Storage Tank / Beer Tank/ Pressure Tank in AISI 304 Operating pressure: 0,99 bar , Test pressure: 1,7 bar Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Top Bottom: with pressure lid 390 mm with 1 x thread connection DN 50 with 1 x overpressure valve with 1 x CO² connection with 6 x screws with 10 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with butterfly valve on 4 stable feets can be moved from all sides with a forklift / truck pallet Diameter: 1000 Total height: 1740 Zyl. Height: 900 Weight: 135
Steel pressure tank, enamelled (last content: fruit juice), operating pressure: 3 bar approx. 16.000 liters used - in very good condition UNI-KINN B-Nr. 19-801 GL Tank with vaulted bottom Operating pressure: 3 bar Measurment and Weight: Diameter: approx. 2.400 mm Total length: approx. 3.700 mm Weight: approx. 3 t on the top: 1 x air vent NW 50 on the front dished bottom: 1 x manhole 400 x 300 mm swiveling 1 x flange connection NW 50 1 x flange connection NW 40 as outlet Otherweise see photos
Liquid pumps, sold as mixed lots of approx. 10 tons. Various capacities and brands
Leybold E250 locking valve vacuum pump is after the general overhaul: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Leybold E250 Rotary Piston Pump pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
The Trivac D65B rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold Trivac D65B Rotary Vane Pump wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Our Ruvac RA7001 roller piston vacuum pump is after the general overhaul: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold RUVAC RA7001 Roots-blower pumps wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Our Sogevac SV300 rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Our Leybold Sogevac SV300 Rotary Vane Pump wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571
25 x 850 ltr. VA2 transport tank, used, some standing, stackable, DOM above 400 mm, rest outlet with valve NW 50, operating pressure 1 bar, test pressure 1,5 bar, pressure relief valve in the lid, waterproof Druckbeständig for E.g. overlay with CO2 or CO2, weight/PCs.: 130 kg, inside cleaned, very stable design, diameter: 1 m, H:/1.52 m, price: â?¬850 plus VAT from stock Dolgesheim
Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us
Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...
We offer 6x Piston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven
Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Months ...
We offer 6xpiston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven
our Ruvac WAU1001 roots vacuum pump is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty After refurbishing, our LEYBOLD RUVAC WAU1001 roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty
Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty
BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800
Sell two new (commissioning 01.05.2023) wood gasifier - pyrolysis plants (each 50KW electric and 120KW thermal) with immediate effect for health reasons. The systems are sold as a complete system with entry system, moving floor (Heizomat) and dryer (11KW) 250KW (cooler). At the moment, the systems are not running in continuous operation, as the heating concept could not be implemented for health reasons. The systems run reliably and can be controlled and monitored via a remote monitoring system. In addition to energy, about 1.5 to 2 tons of biochar or biochar are produced per month. If necessary, support can be provided during dismantling and assembly.
Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. approx. 4.700 liters used – in very good condition Measurement and Weight: Total Height 2650 mm Cyl. Height: 2000 mm Diameter: 1750 mm Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with hinged cover 50% with handle with thread connection DN 50 with 3 cran eyes Tank cylinder: with 2 x handle for mounting with thread connection DN 50 with butterfly valve DN 50 Lower bottom: with rest outlet with butterfly valve DN 50 drawn to the front with 3 calotte feet with variable height
GEA Tuchenhagen lye tank 21.490 liters used – in very good condition UNI-DACH Measurement and Weight: Total Height: 5600 mm Cyl. Height: 4200 mm Diameter: 2800 mm outside, with flange 2900 mm Weight: kg Surface: 2B=IIIC Upper body: - Central with conical lid - With manhole DN 500 - With sleeve ½ for level indicator - With 2 crane eyelets - with pipe socket DN 50 - inlet connection DN 150 - central connection DN 50 Cylinder tank: - With 10 cm isolation - With 200 mm flange connection, 8 screws Lower bottom: -With spout DN 65 -With sleeve ½ -With 4 calotte feet -With overflow spout DN 200
Various sizes Control Panel for refrigeration installations. Container load batches, mixed models and types. We have hundreds available, please see pics for some examples
Plate warmer. Dish warmer. Heating cabinet, Plate warmer Brand: Lowerator Type: 2SHE For plate 26cm diameter Number of pieces: 2 Other details: Please see photos All information without guarantee
Used Ciat LDC 100V EVO R410A air-cooled chiller on R410A built in 2016. Complete with 1 Copeland ZP120KCE-TFD-455 scroll compressor, condenser with 1 EBM-Papst A8D800-A101-05 fan - 50 Hz - 0,89/0,59 kW - 680/540 RPM - diameter 800 mm and a total airflow of 16.700 m³/h, brazed heat exchanger as evaporator, Wilo MHIL502-E-3-400-50-2 water pump, expansion vessel, control cabinet with a Ciat Connect2 controller and a Schneider Electric VW3A4422. Specifications: Brand: Ciat Type: LDC 100V EVO R410A Product type: Air cooled chiller Capacity kW: 26,3 kW Capacity tons: 7,5 Tons Refrigerant: Freon Refrigerant type: R410A Weight: 388 kg Dimensions: 2050x1060x1500 mm (LxWxH) Compressors type: 1 Copeland ZP120KCE-TFD-455 Display: Ciat Connect2 Number of fans: 1 Fan specifications: 50 Hz - 0,89/0,59 kW - 680/540 RPM - diameter 800 mm Amount in stock: 1
CNC-controlled slot machine with movable spindle stick and counter spindle movable in the longitudinal direction up to rods- 50 mm Spindle stock stroke = 600 mm Power Main spindle 12.5 (24) KW Counter spindle 8 (15) KW Guide bush synchronously driven via main spindle Guide bushing carrier KM-flooded Guide bush hydraulically controlled Total 9+2+2 controlled axes of which 9 linear axes 9 Machine + 1 discharge device 2 Circular Axes 1 x C-axis for main spindle 1 x C-axis for counter spindle Control Siemens 840D Solution line
Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control
Flexo Lombardi machine (print width 330 mm/web width max. 350 mm, 7 UV inks) Number of colors: 7 Print width: 350 mm Year of Make: 2019 Anilox rollers: 10 pieces Printing rollers/magnetic cylinders 4 sets 85z, 98z, 109z, 127z Printing plate thickness 1.14mm Pre-installation, video control, centrally controllable from the monitor and on the individual units, cooled rollers, movable laminating and printing sections from the gluing side, one punching station) The machine is in very good technical condition. You are welcome to arrange a viewing. If you are interested, I will be happy to send you more information and photos. Specyfication: Voltage/Power supply frequency 400 Volt / 50 Hertz Power capacity with UV drying system Kw 102 Mechanical speed 200 m/min Number of operators allowed 1 Max reel width mm 350 Max reel diamet ...
X-AXIS STROKE: MM 1,600 Y-AXIS STROKE: MM 810 Z-AXIS STROKE: MM 630 TABLE SIZE MM 1,750 x 770 ATTACK: ISO40 SPEED ROTATION REVOLUTIONS/MIN 15,000 REFRIGERATION THROUGH THE SPINDLE TOOL N ° 50 CONTROL: SELCA YEAR: 2008
1 of used bag-in-box filler, make Alfa Laval, type Piccolo, semi-automatic, new 2011. With nitrogen connection. Used for filling apple-juice and wine in 2 and 3 liter bags with Vitop caps.
Linde Cryoline MT1250 Freezing tunnel Serial: 5-19 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscre ...
Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg
Leventi Bake-off oven Model: BM MM Q2 Bakermat 10 2013 stainless oven with stainless cooling rack, six tray spaces, water pressure 1.5-5 bar
Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 155098 Construction year 1997 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Number of brushes n/a Number of spindles n/a Condition machine working Control type B&R Electric connection 3x400V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos
Double door autoclave De Lama model DLOV year of manufacturing 1998. Useful capacity 4990 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 6 kW. Maximum working pressure 2.5 bar. Maximum working temperature 138.2 C °. Installed cycles: A sterilization + drying B for vials C For closed containers I test cold vacuum machine J sterilization air filter in situ
Double door depyrogenation owen De Lama model DLST/L year of manufacturing 1998. Useful capacity 5440 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 157 kW. Maximum working temperature 250 C °.
Key data: 500 mm, 450 mm, 6000 1/min
1 used CNC lathe Make Gildemeister Model CTX 320 V5 Linear Year of manufacture 2004 Control Siemens 840 D ( ShopTurn ) Workspace: Max. circulation diameter over bed 500 mm Circumferential diameter via X-carriage 300 mm Turning length 450 mm Bar passage 60 mm Chuck diameter 170 mm Chuck diameter sub-spindle 165 mm Plane stroke 160 mm Rapid traverse X/Z axis 60/45 m/min Power main drive (100% ED) 16 kW Speed range 6000 rpm Power sub-spindle (100% ED) 7.5 kW Speed range 6000 rpm Number of tool stations 12 Cylindrical shank diameter 30 mm Number of driven tools 12 Drive power (40% ED) 10 kW RPM, max. 5000 min-1 C-axis speed range 0 - 200 min-1 C-axis positioning 0.001 degrees Connected load, total approx. 32 kVA Net weight with chip conveyor approx. 4300 kg Machine with chip conveyor L x W x H 3890 x 1555 x 1890 mm Accessories: Conveyor Pa ...
Lefort / Corema lid press P400 TE for bale size 400x400 mm, press box 3 m length, opened 1.2 m wide, each wing 90 t and final compressor 100 t pressing force. Drive 30 kW Rexroth pump.
KZE tanks outside marbled 5.610 liter UNI-NIED Measurement and Weight: Total Height: 3550 mm Cyl. Height: 2400 mm Diameter: 1400 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With dished bottom Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With pipe connection with fermentation fitting With clear outlet with butterfly valve DN 50 Lower bottom: With dished bottom With outlet pipe pulled forward with butterfly valve DN 50 With 4 adjustable feet
weight max. in kg: 2500 kg stroke: 4150 mm load center: 600 mm free lift: 150 mm construction height: 2814 mm fork length: 1200 mm fork holder width: 1150 mm Frame width: 1050 mm daylight opening: 110-1320 IK-IK mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
