hauser l kellenberger used for sale

Max cutting length: 2540 mm Max cutting rod: 4 mm steel Moto. Rear stop up to 750 mm side stop weight: 4000 kg

LEYBOLD pump stand consisting of: Pump 1 LEYBOLD Sogevac SV 300 (optional with water cooled or air cooled) pump 2 LEYBOLD Ruvac WAU 1001 H Each pump or the entire frame can be readmitted. A warranty is a complete overhaul of 12 months. Multiple racks, versions available!; ready for operation

Loma Model: 7000 metal detector checkweigher Serial: ECB1101424575 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins

M. No.: 7160013

Rotary vane vacuum pumps lubricated 2-stage Status: Rebuilt warranty: 12 months Manufacturer: Leybold Type: Trivac D16B Suction capacity: ca. 16 m³/h Discharge pressure: approx. 5x10e-3 mbar Engine: 400V DS Resources: Mineral oil Accessories: owner's manual Oil mist separator optional Delivery time: By appointment (subject to prior sale) Spare parts, equipment or alternative pump on request.; ready for operation

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

Single stage rotary vane vacuum pump Status: Rebuilt Warranty: 12 months Manufacturer: Leybold Type: Sogevac SV 65 Cat. No.: 10906 Engine: 400V Resources: Mineral oil Nominal: 65 m ³/h Discharge pressure: approx. 0.08 mbar (abs.) Accessories: owner's manual, oil (petroleum) Time of delivery: Ex works; ready for operation

Used compactor manufactured by HOSOKAWA BEPEX GmbH, model L200/50P. Year of construction: 1996. Roll dimensions: 200mm x 5mm Productivity: approx. 50 kg/h Material of contact parts: stainless steel AISI 304 The set includes a tank made of stainless steel: non contact parts made of AISI 304; tank made of AISI 316L Total capacity: 380 liters Working capacity: 350 liters Technical characteristic: Press force: 150 kN Roll diameter: 200 mm Roll width: 50 mm Drive power: 3 kW/inverter Roll cooling: no Direct press force measurement: yes Automatic press force control: no Adjustable roll gap: no Dust free construction: covers (modernization) Gas tight construction: no WIP/CIP design: no

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

4x NUMMERATORS STRAIGHT, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

More information will follow.

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...

Enrobing machine manufacturer: Kreuter Type: Liliput i S 305 Year of manufacturing : 1987 work width: 305 mm electrical: 400 VAC Complete line 12,4 kw different: speed variabel between 0,7 and 2,1 m/min, with regulable Vibrator, bottom stripper, Product touching parts in stainless steel ex Warehouse Hessisch Lichtenau, unpacked

1x NUMMERATORS STRAIGHT, FORWARD, BIG No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

LeoMat Digitakt 330 SFR – Slitter/Rewinder/UV-Flexo/Laminating  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim sucti ...

6x NUMMERATORS CROSS PLATE, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

GALLUS LABELFIRE 340 7. col. digital – 4 colours flexo – digital varnishing – cold foil – label press VERY NICE DIGITAL HYBRID LABEL PRESS WITH DIGITAL VARNISHING AND COLD FOIL GALLUS LABELFIRE 340 ECS HYBRID DIGITAL AND FLEXO PRESS UV Inkjet system with 1200 dpi  Age: 2017  2 Flexo printing units for digital printing and 2 x Flexo printing units after  Digital printing station with 7 colors  UV Inkjet  Digital colors: Cyan, Magenta, Yellow, Black, Viollet, Orange, Green  2 Flexo printing units after digital unit  Steinemann Digital Varnishing Unit  Matt  Glossy  Spot varnishing  Metal Doming  Semi Rotary Die cutter  Cold foil unit  Turning bars  Laminating  Materials: mono films 30 - 200 μm , paper 30 - 400 μm, composite materials 30 - 400 μm  Spindle core diameter: 76 mm  Max. Roll weight: 250 kg  ...

Optoelectr. distance sensor BOD002N, BOD 24K-LPI08-S4, Balluff, mint condition -50% Special price The current new price of a similar product is approximately € 900. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 250 hours. Incl. sensor cable with approx. 7m + 5-pin plug M12 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabili ...

more information to follow

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

800 x 600 460 mm

Volume: 600 ltr. Material: Stainless steel

Volume: 400 ltr. Material: Stainless steel; --> Mixer equipped with a heating jacket.

System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel

Used KRUMBEIN TKSM vertical slicing machine. Year of manufacture 2017. Length 1500 mm Width 1390 mm Height 1940 mm Weight 275 kg Max. product size 600 x 600 mm Electricity 230/400 V 50 Hz 3 Ph Power consumption 0.8 kW Voltage 24V DC Description: Within each program, we can freely set a number of parameters such as product diameter and height, slicing speed (in the initial, middle and final phases separately), knife exit speed from the product, knife temperature, slicing depth (complete cut or shallow cut only), knife cleaning frequency. The change of the working system from slicing round to lengthwise products is done manually Performance depends on the type of products to be sliced, their structure and temperature, and the number of portions. Double blade system for gentle and precise cutting. Heated blade. Quick return on investment due to minimal human labo ...

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

LAD fresh meat mincer type WW 130 complete stainless steel on request with loading for 200 liter standard trolleys

Water tanks for crop sprayers, standing or lying flat, 3,000 L, 4,000 L, 5,000 L, 6,000 L and more. Used polyester tanks / GRP-tanks, water tanks, barrels, storage containers for field sprayers. We offer vertical or horizontal tanks, round or square shape, made from robust fibreglass, with several in- and outlets for filling your sprayer. Our tanks are used, have been professionally cleaned and are in good condition. The containers can further be used as storage tanks for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, for rainwater collection and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already bee ...

PRATI – VEGA PLUS LF330 CNT  Brand / model Prati / Vega Plus LF330 CNT (2008)  Type converting machinery  Year / SN 2008 / LF 020  HS Code 8441 1010 Description:  Slitter  Cutter  Rewinder with inspection and label checking.  Unwind with tension control and single edge guiding.  Pneumatic bars on the splice tables for changing rolls.  Color touch screen operation for all functions, programs and jobs.  For automatic non-stop rewinding (3-spindle turret) and cutting rolls (including 12 roll knives and a bar with 14 fixed knives) in register to smaller size rolls.  Waste suction removal.  During the process, the labels can be counted (numbers and meters) and checked for quality and missing labels with a missing label system.  Size Min. / max. web width: up 150 – 330 mms  Min. / max. paper weight: 90 – 16 ...

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

8 recondtioned fuel pumps. Ready for mounting - new elements and seals. Pumps is from engine with approx. 10 running hours.

Material: product contact areas in stainless steel; Volume: 3000 ltr. Drive: 75 KW;

Used weighing and packaging machine used for packing granules by TÉCNICAS MECÁNICAS ILERDENSES SL. model ILERSAC LBSD. New 2013. TECHNICAL DATA: PRODUCT CHARACTERISTICS: - Product BLACK COAL IN PROSPECT. - Density 340 / 645.16 kg/m3 - Fluidised Yes - Granulometry 30 µm - Sack type PAPER - OPEN BAGS - Bag weight 12 kg - Dimensions of bag 740x500x160mm - Dimensions of CP1 pallet 1200x1000x150 - Maximum pallet height 1800 mm Maximum production of 90 bags/hour CONNECTIONS: - Electrical connection 380V III+N+T 50 Hz - Installed power 12 kW - Control voltage 24 V - Air pressure 6 bar - Air consumption 150 NL/min. - Aspiration 1900 m3/h - 21 m/s Main features: - Programming of reading stability conditions. - Programming of weighing cycle and autocorrection parameters. - Zero variation detection range. - Precision: 5000 homologated divisions. - 50 operating reci ...

DEAR'S SALE, COMPLETE MAN B&W 8T23LH4E YOM 1988 720 RPM 850 KW Std cranksaft good condition Brgds Hakan KUSCU +905323642509 info@kscege.com

FOR SALE... FOR SALE ALFA LAVAL MIB 303S 13/33 YOB 2011 AT TURKEY TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MIB 303S 13/33 YOB 2011 AT STOCK READY TO SHIPMENT IF YOU INTEREST PLS LET ME KNOW Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...

CIAT LG-LGP 900Z Product number:M18-4309 Cooling capacity:249 kW Refrigerant:R407C Refrigerant Content:12,3 + 13,3 kg Voltage:400 Volt Power consumption:67 kW Dimensions:2200 x 900 x 1700 mm Weight:1223 kg Year:2004 Number in stock:1 piece(s) Price:Quotation request Very nice water cooled Ciat water chiller with 4 scroll compressors distributed over 2 circuits. Mentioned capacity at a water temperature of +12/7°C (inlet/outlet) and an condenser water temperature of +30/35°C (inlet/outlet). Visit also our website: used-refrigeration

For sale TWO (2) complete lines for plastic caps with molds, include: (2 pcs) CCM001 SACMI LINES with moulds for HL3 cap (Coca Cola approved high cap with Liner) Condition: Fair condition. Were Working at moment of disconnection in 2015. Origin Italy. Exworks South America 380volts 50Hz Huge Lot of Sacmi genuine spare parts.

Manufacturer / Origin: Brehmer / Germany (EU)

Lowara pump FHS 100-200/300 ELP 120-310m ³/h 47m - 22, 6m, P2 30KW, incl. non-return valve and line reducing valve

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2