harmonic drive used for sale

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Very ADDAX underground cable machine / New The cut range of 10 - 160 mm PVC, rubber, iron and lead cables can be processed. Drive: 15 hp/11 KW Weight: 1.3 T New ADDAX subterranian cable stripper can be used for cables with diameter of 10-160 mm out of pvc, rubber,iron and lead. Drive: 11 kw / 15 hp Weight: 1.3t Every time we have 12 different cable strippers on stock. New and second hand machines

Offer: electrically driven We will be happy to send you further information and other roller conveyors. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved.  ...

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Farrel Bridge model 3D Banbury internal mixer, Machine no. 85R6001, May 1985, Chamber capacity: approx 65 litre net. 2 wing rotors, Roller bearings, FYA Seals, Drop door discharge with power pack, Pneumatic hopper, Standard Bullwheel/pinion drive, With Brush 200HP slip ring Motor, 981rpm, 3ph, 50Hz. Complete with oil immersed starter etc. Previously used on PVC

Hoffmann rail crane, track 1m, telescopic crane extension 16m, lifting load 16t, electric overhead drive, or MAN diesel engine. Weight approx. 45t. For questions 0049 1604444300 net price 12.500,-€

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

Type: VK 1056, built 2006. Single deck vibratory bar sizer with integrated feeding chute, bar mount and bar rakes in stainless steel, screen frame rubber lined 60° shore, 2 imbalance drives 2,8 kW / 960 RPM, open screen frame on coils, break control, steel construction. Current parting cut at 8 mm; Sizer has only been running for 12 months, therefore it is in very good condition.

1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...

: ERC 53/1 - CL, Robot Built: 1999 Other X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Sa ...

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

Used roller doors for painting systems between the painting booth and the dryer Make : ITP, Wolf Width: 1 pc. approx. 6.1 m 1 pc. approx. 5.7 m 1 pc. approx. 2.6 m Height: approx. 2.6 m each Drive: electric, each approx. 0.5 kW Location : Nuremberg Warehouse Sell price: € 1,450,- for 5 to 6 meter long roller doors € 1,250,- for 2 to 4.99 meter long roller doors per net, from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Parallel shaft gear with e-drive 30 kW (e.g. for use with a ball mill), motor shaft diameter 45 mm, N1 = 1.450 RPM, N2 = 14,5 RPM, drive shaft diameter 130 mm, with electrical brake, clutch with counter disc 600 mm diameter. Oil 190 CSX/50°C - Wa-No. 369226. Complete on base frame.

used box transport Make KHS 18 m straight transporter 240,-€/m 2 pieces 90 curves without drive 450,-€ several drive/deflection stations 650,-€ Various railing brackets with guides

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

Low pressure blower GMB 14.8, Y.O.M. 1994, with 11.8 m3/min. volume flow at delta-P = 360 mbar, P1 = 0.64 bar. Drive 44 kW / 1.485 UPM, with check valve, overpressure valve, tank, air filter, base and sound insulation hood.

Technical data: 1-drive unit / 1-loose unit 2012 overtaken max. load: 10 to Container diameter: 1000-5000 mm Roll diameter: 540 mm Roll width: 600 mm

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

Low-pressure blower GMB 14.8, built 1994, with 11,8 m³/min. volume stream at delta-P = 360 mbar, P1 = 0,64 bar. 44 kW / 1.485 RPM drive, with flow check valve, pressure-limiting valve, tank, air filter, base frame and sound insulation hood.

Steel silo volume approx. 2.5 m3, payload approx. 4 tons, net weight approx. 300 kg, outlet height 280 mm, outlet flat slider with handwheel and spindle drive, container open at the top 750 x 750 mm.

1 x Smit 660mm dia x 2100mm wide two roll mill, Rebuilt 2005, manual nip adjustment, Lunn type safety bars, Back roll surface fluted, Front roll smooth finish. Bush type bearings with flood lubrication, compact \Jahnel\ right angle drive gearbox. with 180KW DC variable speed motor and controls. Strip knives to front roll. Heavy duty 2 part bedplate. Extra Information: Front roll 29 teeth Back (fluted roll) 32 teeth Friction ratio 1:1.1 Motor 180kW DC variable speed, 1300rpm, Gear box ratio 1:9.8 Bullgear 122 teeth, Pinion gear 18 teeth (Ratio 1:6.777) Therefore approx roll speeds as follows: Input motor speed 1300rpm: Front roll 21.53 rpm Back (fluted) roll 19.6 rpm

in stainless steel (stainless steel chain) as hinge belt conveyor approx. 25m approx. 5 drives PREis / m: EUR 260.00 ... with new stowage chain for shrunkEN PET bottles refurbished KHS version Price /m: EUR 580.00

Stainless steel vibrating sieve for wet sieving, 1 deck with 915 mm, 2 outlets, with unbalance drive (approx. 1 kW) and springs. 2 pcs. available.

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Vibrating sieve for wet screening, 1 deck with 915 mm (36) Ø, 2 outlets, with imbalance drive (ca. 1 kW) and springs. 2 pcs availabe.

STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Rubber lined, ensulated vibrating chute with 2 outlets and 3 inlets (200 mm Ø each), with 2 imbalance drives (1,8 kW / 960 RPM each). Chute has been used for feeding material in two side by side standing Mogensen sizers.

Segment belt screw mixer with discharge screw, make baurmeister type:BE 2000, BJ. 1990, Wekstoff stainless steel, capacity 2000 liters, drive power 5.5 kW.

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper,  ...

Lenze servo drive Specifications 3xAC 345V 1.1A 4000min-1 200Hz 130Nm 0.54 KW IP 64 Brake 24 VDC 25 Nm Servo drive is NEW and org. Packed,was with me as a replacement in the warehouse , due to insolvency of my customer I clear my warehouse. If you have any questions, please tel. 05242/43186 email info@pradler.com Servo units Frequenumumumer Rotary encoder proximity switch at the bearing please inquiries. Pradler Machine Service

Specifications: Dosiebunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) Can be used in cable recycling for granulator filling, granulate processing, plastic films, wood chips, etc. Features -Content: 3 qbm -Ruehrwerk, drive: 5.5 KW -Fuellstand control sight glass -Adjustable machine feet -Dosing screw discharge 200 mm diameter, speed control of the screw via frequency control at the control cabinet via Poti, Drop height 700 mm, screw drive power: 0.75 KW Optional with conveyor belt for filling Dosing Bunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) For Cable Recycling by the Cutting Mill filling, PVC Granulate, PP or PPE, and many more Amenities -3 qbm -Agitator, Drive: 5.5 KW -liquid level indicator -adjustable machin feed -metering device for the spiral conveyer, Diametre: 200 mm, speed control for the spiral conveyer by Frequen ...

Fabr. BABCOCK, type: 500 NVD, electric drive 3 KW, inlet diameter = wheel diameter: 600 mm, height 500 mm, 13 pieces available, for extracting fine dusts

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation

technical data: Type: not driven Make: Möhringer Rolls Number: 3 pieces Warehouse: Wiesentheid

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

1 of used TRANSVER 180-degree Powered Belt Bend - oversized, type KR1-SP, new 1993. Operates counter-clockwise. Outside radius of frame 2.154 mm, end rollers diameter 14 + 50 mm. Conveyance height 1.250 mm (± 50 mm), inside radius of belt 1.104 mm. Belt width 800 mm. Belt speed at radius 1.504 mm 30 m/min. With SEW Variomot drive, 380V/50Hz. Color RAL 1015 bright ivory.

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg

technical data: Rank: 10 90 curved Transport by roller link chain and steel chain wheels Drive without motor

Machines No.: 0052 QFL 0053 Insertion Drawing No.: 146 001 75 1 cross conveyor light with insertion: Power: 0.37 kW Axle distance: 2.06 m Rank: 3 Transport by 3/4" chain and stanhl chain wheels Drive by special gear motor Substructure and bearing housing in steel construction

Tanks fuel tank fuel tank storage tanks 5 cbm TAnkstelle diesel tank Gas station fuel tank tank tank heating oil tank storage tank 5,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube, 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.70 m + console / D = 1.60 m / weight CA. 1.6 tons. / free charged ex works. On the tank, a pump / nozzle pump is installed on customer's request,  ...

technical data: Track gauge: 980 mm Support height: 420 mm reinforced execution circulating chain Drive by worm gear motor with built-in slip clutch Kippstool adjustable stem holder Cable and cable balancing