We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,566 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz
used
Servo drive, controller, converter, frequency converter, frequency converter, drive converter, compact converter, drive controller -Manufacturer: Reis Robotics, servo controller motor control -Type: Drive 4009 AT -Number: 2x servo controller available -Price per piece -Dimensions: 350/80/220mm -Weight: 4,1 kg/pc.
used
Servo drive, controller, converter, frequency converter, frequency converter, drive converter, compact converter, drive controller -Manufacturer: Reis Robotics, servo controller motor control -Type: Drive 4025 AT -Number: 2x servo controller available -Price per piece -Dimensions: 350/155/220mm -Weight: 6.3 kg/pc.
used
Welding machine, bitumat, roof membrane welder, welder, foil welder -Manufacturer: Leister, welding machine type Triac Drive with transport box -Voltage: 220V -Power: 100 to 3680 W max -Hot air blower: Leister type Triac Pid 1600 W -Dimensions box: 460/360/H170 mm -Weight: 10 kg
used
Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Machining: milling/drilling -Motor spindle: was tested on a robot -Operating hours: 4350 h -Motor spindle: 55 kW -Servo converter: Lenze Servo Drives 9400 -Admission: HSK32 -hydraulic tool clamping OTT type: 95.102.779.0.2 V01 -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions control cabinet: 1118/800/H2430 mm -Weight: 694 kg
used
Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg
used
Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg
used
Shipping within Germany 8 ,- insured
used
Shipping within Germany 8.- insured
used
Shipping within Germany 8.-
used
Spring promotion In stock!Genie GS-3246 E-Drive from 2023 NEW!Working height: 11.78m, platform height: 9.78mPlatform length: 2.26mPlatform length extended: 3.18mLength: 2.44m Width: 1.16mOwn weight: 2,367kgLoad capacity: 318kgMax. people: inside 2 p outside 1 p.Two-wheel front wheel drive 24V(4x6V)Non-marking solid rubber tires
used
CNC frame processing machine Brand: COMEC DRIVER New machine - With this machine you can process assembled door frames in quantity-1, door by door. - 5-axis machining spindle with ingenious crosshead technology for fastest tool use and productivity. Automatische Positionierung der Auflagensupporte. - High-precision and program-controlled clamping system with O-reference on the surface. - Laser measurement of the surface contours for precisely fitting milled fittings. - Automatic discharge of the finished frame parts. - Possibility of connection to known door software systems. - The machine can be individually designed to meet your required machining needs. Give us your requirements and let us offer you your MD JAMB suitable. - This offer is valid for Germany. Wehrmann is the exclusive sales and service partner for COMEC in Germany.
used
Drive side dimensions: Center height 160 mm , Spindle diameter 100 mm , Length 410 mm , Width 265 mm , Height motor housing 250 mm Dimensions support side: Length 180 mm , Width 165 mm , Height 230 mm General information: Harmonic Drive gearbox HFUC 40 -120 , reduction 1:200 , torque max. 200 Nm , holding torque max. 800 Nm Positioning accuracy Sec. 4/360° , Encoder RON 285C/18,000 strokes , Input increment 0.01° , Repeatability + / - 20" Clamping force 30 KN / 3 t, total weight 125 kg
used
Shaft gear, installation kit HARMONIC DRIVE ANTRIEBSTECHNIK HDUF/FB 20-128 ( HDUF/FB20-128 ) 20-128-54130 i = 128 Drive shaft: Ø 12 mm Output flange: Ø 32 mm New ! Dimensions (packaging): 230 x 100 x 70 mm
used
Year of construction: 2010 Control: NC control PC base Touch control panel Networking Spindle: HSC SK30 Tool changer: 5 fold 5 axes Isel linear guide Parts unit: Harmonic Drive A-axis Omron Engines Blank clamping via A-axis such as lathe with tailstock Machine frame kpl. Aluminium Plexiglas window on all sides Two large sliding doors Large recess for suction under A-axis - Technical errors and prior sale reserved. -
used
Year of construction: 2014 Control: NC control PC base 2x touch control panel Networking Spindle: HSC SK30 Tool changer: 4 fold (optional further 4 fold changer) 5 axes Two processing rooms / alternating operation Bahr linear guide Parts unit: 4x Harmonic Drive A1-4 Yaskawa Engines Blank clamping via A-axis such as lathe with tailstock Machine frame kpl. Aluminium. Base plate stainless steel Plexiglas window on all sides Two pneumatic sliding doors Four cleaning doors Large recess for suction under A-axis - Technical errors and prior sale reserved. -
used
5-axis machining center HG GRIMME GSF - MACHINING PLASTICS - RESINS - FOAM MACHINING PLASTICS - RESINS - FOAM machine MODEL GSF 20/10 - YEAR 2009: _ Ibag motor spindle HF80.2 A40 CIP, 40000U/min; 2.5/3.2kw, SKi _ manual tool measurement _ tool lift: height 725mm _ Work area dimensions: 24001200 _ store of 13 tools _ presence of an external HYFRA cooler _ Harmonic drive AG _ PLC: Siemens 840 D
used
Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-17A-120-2A-SP article number: 1021350 series: CP l Size: 17A reduction ratio: 120 version: 2A Special version: SP Speed: max. 10000 rpm Rated torque : 24 Nm Shaft diameter: Ø 18 mm flange diameter: Ø 60 mm New, with backings ! Dimensions ( packaging ): 260 x 100 x 95 mm
used
Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-17A-120-2A-SP article number: 405764 series: CPL > Size: 17A
used
Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-25A-100-2A article number: 405770 series: CPL Size: 25A Reduction ratio: 100 Version: 2A Speed: max. 7500 rpm Rated torque : 67 Nm Shaft diameter: Ø 26 mm flange diameter: Ø 85 mm New, with backings ! Dimensions ( packaging ): 360 x 140 x 95 mm
used
Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-25A-120-2A article number: 405771 series: CPL Size: 25A Reduction ratio: 120 version: 2A speed: max. 7500 rpm rated torque : 67 Nm shaft diameter: Ø 26 mm flange diameter: Ø 85 mm New, with backings ! Dimensions ( packaging ): 360 x 140 x 95 mm
used
Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-32A-100-2A article number: 405774 series: CPL Size: 32A Reduction ratio: 100 version: 2A speed: max. 7000 rpm rated torque : 137 Nm shaft diameter: Ø 36 mm flange diameter: Ø 110 mm New, with backings ! Dimensions ( packaging ): 325 x 185 x 125 mm
used
Installation kit, shaft gears, gearboxes HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-32A-120-2A article number: 405775 series: CPL Size: 32A Reduction ratio: 120 version: 2A speed: max. 7000 rpm rated torque : 137 Nm shaft diameter: Ø 36 mm flange diameter: Ø 110 mm New, with backings ! Dimensions ( packaging ): 325 x 185 x 125 mm
used
Installation kit, shaft gearbox, gearbox HARMONIC DRIVE ANTRIEBSTECHNIK series CPL-2A CPL-32A-120-2A article number: 405776 series: CPL Size: 32A Reduction ratio: 160 version: 2A speed: max. 7000 rpm rated torque : 137 Nm shaft diameter: Ø 36 mm flange diameter: Ø 110 mm New, with backings ! Dimensions ( packaging ): 325 x 185 x 125 mm
used
<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Optionc Inkdrive (ZIP3), DQS, and TIFF output are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
used
<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
used
Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312 ...
used
<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Inkdrive(CIP3), DQS, and TIFF output options are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
used
<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now
1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.
used
drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock
used
AGFA drive motor of the knife for SelectSet 5000. Including dental equipment. Available now
used
Horizontal batch mixer with 630 l. gross capacity, pneumatically operated discharge gate (new cylinder), 37 kW drive, Flender gearbox (N2 = 58,58 RPM) and hard metal plated mixing tools. Refurbished in 2016, very good condition.
used
MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...
used
X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Safety package 1 Structure of the device with s ...
R26097/16 EDELMANN Continuous Printing Machine Model: COLOR PRINT V72 SL Built: 2008 Paper web width: max. 720 mm Printing width: max. 710 mm Availability: approx. 12/2011 Servo drive Microprocessor control R/R, R/B Flattening: roll diameter max. 127 cm BST web edge and center control Track length control 2 offset printing towers Automatic inking unit washing Railway turning device Hole punching unit Cross cutters UV dryer Plough folding system Available: by arrangement
used
Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus ...
used
Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.
used
Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.
used
Type: 21846, Y.O.M.: 1982, 0.2 kW, U-Trog gutter, top open, magnetic drive: EVS 8, infinitely adjustable, mounted on base, separates round from angular units.
used
Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location ...
used
Offer of a drive-in shelf with about 500 parking spaces. Max load per pallet approx. 800 kg More information against request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error a ...
used
Built: 1991, inlet: 400 mm x 400 mm opening, overhauled, without drive.
used
Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.
used
Work surface: 1,400 x 5,000 mm, stainless steel lining, drive 2 x 2.2 kW
used
U-trough chute (dimensions: 500mm x 1000 mm long). Magnetic drive: EVS 8 Nr. 1646 with variable speed. On steel construction. Separates round from angular aggregates (rejects).
Offer of a high-bay warehouse with approx. 2,500 parking spaces. Shelf stand approx. 6.00 m high All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Price ...
used
Type: RHS 1 U 200 GR 360, built 1995. Centrifugal blower in special steel, 3.000 m³/h, 1,2 kp/m³, Drive: Loher, 4.500 RPM, 5,5 kW, on base frame with suction- and pressure-bellows and 7 vibration dampers, in mint condition.
used
used article transporters for tetrapackaging with drives, switches and curves approx. 80m in stock Price is 185,-€ per meter
used
div. Pallet transport Chains/rolls for Düdo pallets and Euro-industry pallets Unit price: from 700,00 € with drive