hardness tester used for sale

The Salmson pump type 208-15/7,5 is sold Pump was stored as a spare device. n-2900 rpm 7.5kW Flange diameter 200mm Bore 80mm Bdhrml3rbb Hole circle 160mm / holes 18mm 8 pieces Distance flange / flange 435mm Height 740mm depth approx. 300mm

IFM 2000Air capacity 2200m3/h Engine power 1.5KW, Operating voltage 230/400V;; 50/60Hz; 3Ph Dimensions Filter 1020mm620mm800mm 4 filter levels Accessories High Tripod,7007001700mm Suction hose diameter 200mm

Hardening testers Manufacturer Zwick& Co. KG. Wolpert or others For testing or measuring the -RockwellC, MPA and JHT -Vickers hardness - and other Extensive accessories of weights, measuring plates, test diamond Special price

According to the description, it can be Rt, Rz, Ra to be measured Voc3k -Touch distance 1.5; 5; 15mm - Measuring distance 1.25; 4; 12.5mm -Touch speed 1mm/s measuring range 0.3; 1; 3;m 10 at Ra 1; 3; 19; 30 microns at Rt, Rz -Display: pointer instrument, scale length 60mm, accuracy lass 1

Product size, leakage tester with graviering unit. After the test mark the good product Dimension (mm): 2500x950/1550-2300 Gravier: 322-WRDM, Borries Leakage tester, DLP 30, Bayer Vacuum pump, RA 0040 F 503, Fezer

Legionella water tester -With documents in English -Dimensions: 480/380/H180 mm -Weight: 3.2 kg

The MPS450 Multiparameter Simulator (the MPS450) is an electronic signal source for determining if patient monitors are performing within their operating specifications. The MPS450 provides the following function categories: • ECG Functions • Arrhythmia Functions • ECG Performance Testing •Respiration • Blood Pressure • Temperature • Cardiac output (optional) • Fetal/Maternal ECG and IUD (optional) The MPS450 Multiparameter Simulator (the MPS450) is an electronic signal source for Determine whether patient monitors are performing within their operating specifications. The MPS450 offers the following feature categories: • ECG functions • Arrhythmia functions • ECG performance tests •Respiration •Blood pressure •Temperature • Cardiac output (optional) • Fetal/maternal ECG and IUD (optional) The device can be shipped worldwide  ...

The RF303 Electrosurgical Analyzer tests electrosurgical units (ESU) for generator output and high frequency (HF) leakage. It is compatible with both isolated and earth/ground-referenced types of electrosurgical units. You can test both the high-level monopolar and the low-level bipolar ESU outputs using this versatile Analyzer. RF303 Electrosurgical Analyzer Tests Electrosurgical Devices (ESR) Generator power and radio frequency (RF) leakage. It is compatible with both insulated and earth/ground types of electrosurgical equipment. You can test both the high-level monopolar and the bipolar Low-level ESU outputs using this versatile analyzer. Device can be shipped worldwide. The tester can be shipped worldwide.

Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions.

Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation.

PCB tester with contact pin test, test system ELABO 99-9Z ZM 107011 test system, test system for one-sided testing of SMD boards Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Fabr. Ref. SN0064623 Year of construction 2004 adjacent 2-hand control panel Machine comes from a production shutdown. You will receive the machine exactly as shown, without functional guarantee. For your and our safety: Please take the opportunity to visit. We have even more SMD machines and devices from a German production shutdown. for example:1 piece Variable Width Conveyor NUTEK, NTM410XL-1500-2(S) Year of construction 2011 If you are interested, please ask.; used

Lampentester E. DOLD & SÖHNE AI 990/03 ( AI990/03 ) 0002061 unused ! Dimensions: 85 x 45 x 120 mm

Deadweight tester, 2-way, for intermediate plate mounting BOSCH 0 811 401 223 ( 0811401223 ) pressure difference: 8 bar Q: 75 l/min used, tested ! Dimensions: 122 x 70 x 55 mm

concentricity tester PAGUS Distance between centers: 500 mm Center height: 100 mm used, tested ! Dimensions: 855 x 165 x 150 mm

Tolerance tester, indoor measuring device, measuring table with column guide FEINMESSZEUGFABRIK SUHL Tolerance tester for bores Measuring range: 10 - 20 mm Working surface: 80 x 40 mm height max: 95 mm with wooden box Dimensions: 300 x 260 x 450 mm

Concentricity tester PAGUS Distance between centers: 430 mm Center height: 125 mm used, tested ! Dimensions: 600 x 330 x 270 mm

concentricity tester, concentricity tester CCCP MODEL 370-P 4A Distance between centers: 280 mm Center height: 87 mm used, tested ! Dimensions: 600 x 220 x 265 mm

concentricity tester, concentricity tester MASSI Distance between centers: max 1500 mm Center height: 300 mm Clamping table: 2100 x 300 mm 1 T-Nut Groove width: 12 / 22mm Groove depth: 21 mm If necessary, two feet (height 460 mm, Ø 300, see last photo) are supplied free of charge ! used, tested ! Dimensions: 2100 x 300 x 650 mm

Surface tester, coating measurement of solar cells AUDIODEV GmbH HELIOS tester: tn V3 E41000287 Control unit: 2xCSS/Hle/HUB < br /> E41000291 with 2x spectrometer SP-15 E410000275 300 VA 100 - 240 V 1AC 50 - 60 Hz Measuring cable length: approx. 3.0 m used, tested ! Dimensions( tester ): 220 x 260 x 130 mm Dimensions( control unit ): 450 x 330 x 150 mm Dimensions( packaging ): 450 x 330 x 360 mm

Form tester MAHR MMQ 40 5440057 Test diameter: max. Ø 420 mm R axis: max. 180 mm Z-axis: max. 350 mm Pmax: 60 VA Operating voltage: 110 - 230 V 1AC 50 / 60 Hz 2x Length Gauge T6W 5400054 Form-PC-Interface 7023988 Form-PC FUJITSU SIEMENS CELSIUS W340 with monitor, keyboard, technical documentation and various connection cables used, tested ! Dimensions ( form tester ): 650 x 460 x 750 mm Dimensions ( Form PC ): 510 x 210 x 390 mm Dimensions ( assembled ): 1500 x 830 x 1600 mm

concentricity tester, concentricity tester PAGUS center height: 200 mm face plate: outer Ø: 335 mm height with jaws: 128 mm slotted holes: Ø 16 x 45 / 55 mm flange for face plate: Ø 150, PCD: Ø 105 mm Table for measuring stand: 305 x 53 mm, working height: 45 mm Measuring stand: Radius of action: 250 mm Measuring height: 300 mm Stand: 260 x 70 x 44 mm used, tested ! Dimensions: 390 x 380 x 450 mm

Surface tester for leather, with control unit KARL FRANK GmbH Type 665 motor: 0.12 kW 1400 rpm 220 / 380 V IP44 used, tested ! Dimensions(tester): 600 x 500 x 800 mm Dimensions(control unit): 390 x 280 x 180 mm

Leak tester company JWFroehlich installed in an additional control cabinet

• With precision balance Sartorius BP 61S • Measuring capacity >5 tbl./min. (BP 61S) • Tablet Ø max. 20 mm • Tablet height 1-12.5 mm • Max. tablet weight Tablet weight 30 g • Weighing range 61 g (BP 61S) • Readability 0.0001 g (BP 61S) • Interface RS 232 (RS 485 via external converter) for transmission of measured data to the control unit of a Kilian tablet press • Compatible with Kilian monitors CW 100/200 and the controllers C 50/52 IPC and VICON • Connection 220V/50Hz

Shape tester Hommel Etamatik for roundness and shape measurement in very good condition.

Device tester, power supply -For: 15 V devices -Measuring range -Measuring current: max. 300 mV -Dimensions: 250/260/H120 mm -Weight: 1.9 kg

Device tester, power supply -For: 15 V devices -Measuring range -Measuring current: max. A. -Dimensions: 233/225/H160 mm -Weight: 1.9 kg

-Test device for electrical devices -each with an isolating transformer -Number: 7x available -Price: per piece

Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe -Manufacturer: Hommel, probe holder for roughness measuring device -Type: KVA type P2/115 -Tactile path: s= 12 mm -Dimensions box: 345/130/H85 mm -Weight: 1.7 kg

Alignment tester, shaft aligner, laser shaft aligner -Manufacturer: db Prüftechnik, alignment tester Optalign 1.5 -Accessories: see photos -Dimensions transport box: 420/290/H555 mm -Weight: 20 kg

Concentricity tester, concentricity machine, concentricity tester, concentricity tester -Manufacturer: Massi, concentricity tester, solid cast design -Recording: MK2 -Max. Diameter: 275 mm -Max. Distance between centers: 460 mm -T-groove: groove width 12 mm -Dimensions: 840/300 / H320 mm -Weight: 76 kg

Hydraulic tester for hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic test pump, Hydra Sleuth Hydraulic Tester -Manufacturer: Schroder, Hydra Sleuth Hydraulic Tester -Type: PHS-60-3 -Pressure max.: 3000 psi -Accessories: see photos, with wooden box -Dimensions: 775/305/H175 mm -Weight: 25 kg

Run-out tester, run-out machine, run-out tester, run-out tester -concentricity tester -Max. Diameter: 150 mm -Max. Distance between centers: 300 mm -Dimensions: 490/115/H145 mm -Weight: 12 kg

Tensile and compression tester Manufacturer: Ametek Lloyd Type LRX Plus Serial No. 108476 Year of construction 2011 Measuring range 0.2 N – 5 kN (when using interchangeable measuring cells) Weight 50 kg Maximum load 5 kN (1100 lb) (tensile and compression test) Force measurement accuracy - better than 0.5%

Description: Lot of cca 20pc TESA, SOLATRON Inductive Tasters , Pen Manufacturer: TESA, SOLATRON Lot of cca 20pc Inductive Tasters , Pen ( TESA, SOLATRON) + 1pc MAHR Milliprint , Untested, for Parts or not Working Please find more details in the attached PDF. Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 7 kg

Description: Roughness tester for internal and external measurement in unbreakable ABS case 120 x 46 x 68 mm. 3.7 V Lithio rechargeable battery and 220V charger included. Portable roughness tester characterized by high precision, wide range of applications and ease of operation. Recommended for tests of surfaces of all types of metals and non-metals. 128 x 64 Dpi piezoelectric diamond LCD sensor. Memory of 100 groups of measurements. Including reset glass plate. Battery charge indicator. USB data output with PC cable and software included. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 370 x 310 x 125 mm, weight approx.: 5 kg

MFR/MVR Tester Ceast 7026.000 Year of construction: 2010 Equipment and accessories see pictures Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.

tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm -Mounting: 3/8 -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg

Description: Serial number 215151208 With granite measuring table 400 x 250 mm, with recessed T-slot Pillar height adjustment approx. ,300 mm Approx. Onsite Dimension. (l x w x h): 400 x 300 x 600 mm, weight approx.: 50 kg

Description: Roughness tester for internal and external measurement in unbreakable ABS case 120 x 46 x 68 mm. 3.7 V Lithio rechargeable battery and 220V charger included. Portable roughness tester characterized by high precision, wide range of applications and ease of operation. Recommended for tests of surfaces of all types of metals and non-metals. 128 x 64 Dpi piezoelectric diamond LCD sensor. Memory of 100 groups of measurements. Including reset glass plate. Battery charge indicator. USB data output with PC cable and software included. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 370 x 310 x 125 mm, weight approx.: 5 kg

Description: Tailstock moveable with fixed centers Approx. Onsite Dimension. (l x w x h): 750 x 300 x 750 mm, weight approx.: 50 kg

General SKU300U1188 LocationBarneveld MakePharma test TypeWHT-SM / WHT-2ME Mach.No.10459 / 10452 Specified Features - Miscellaneous Capacity2 testing stations Motor220 volt Capacity10 to 15 tests/min Information Year of construction2001 Total height0,51 m CEcheck Floor space1,0x0,9 m Weight105 kg Extra SpecificationsMulti batch Tablet hardness tester with multi batch feeder. hardness test range 5.0-500.0 N, thickness testing range 1.00-20.00mm, diameter testing range 2.00-30.00 mm, weight testing range 0.0001-200.0000g MiscellaneousPharma TestMiscellaneous > MiscellaneousBrand > Pharma Test What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U1182 LocationBarneveld MakePharmatron AG TypeDisiTest 50 / MultiTest50 Main Features MaterialPlastic Specified Features - Miscellaneous Motor100-240 volt, 230 VA Information Mach.No.000104 Floor space0,42x0,18 m CEcheck Total height0,46 m Weight10 + 8 kg Extra Specifications : Disitest 50:  : The device ensures a homogeneous temperature of the test medium during the induction heating process.  : Strokes per minute: 30  : Stroke height: 55 mm  : Temperature range: 25-40°C  :  : Multitest 50:  : Tablet hardness meter.  : Measuring range weight 0.1 mg - 100 g.  : Tablet thickness 0-13 mm.  : Tablet diameter 0-35 mm.  : Hardness range up to 400 N. MiscellaneouspharmatronMiscellaneous > MiscellaneousBrand > pharmatron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKU384U1047 LocationBarneveld MakeErweka TypeMulticheck Mach.No.101456 Main Features MaterialPlastic Specified Features - Miscellaneous MaterialAluminium, Plastic Capacity0,05-3,0 mm/sec Motor100-240 volt Capacity10-100N/sec Information Year of construction1996 Total height0,62 m CEcheck Floor space0,63x0,65 m Weight50 kg Extra SpecificationsMeasuring range hardness 3-500N, measuring range diameter 2-26 mm, length 2-28mm, thickness 1,5-8mm, weight 20,0mg-20gSolid pharmaceuticsOther pharmaceuticsGeneric medicinesMiscellaneousErwekaIndustries > Pharmaceutical > Solid pharmaceuticsIndustries > Pharmaceutical > Other pharmaceuticsIndustries > Pharmaceutical > Generic medicinesMiscellaneous > MiscellaneousBrand > Erweka What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

General SKU300U910 LocationBarneveld MakeDistek Type2100B and TCS0200B Mach.No.2110256 and 2130263 Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous MaterialAluminium, Glass, Stainless steel Capacity1 Ltr. each Motor230 volt Capacitytotal 7 Ltr. Information Year of constructionunknown Total height1 m CEcheck Floor space0,64x0,49 m Weight71,3 kg Extra SpecificationsDissolution test system 2100B Bath 7 built-in vessel positions,. mixing speed: 25-250 rpm, resolution 0.1 rpm. digital controlled, 220Volt, 0,5A distek temperature control system type TCS-0200B 220Volt, 7A MiscellaneousDistekMiscellaneous > MiscellaneousBrand > Distek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

conventional haertepruefer for the Processes Rockwell C , B , A Analog measuring watch, manual operation, weight load system Standard compliant according to ISO6506 Performance 2 years At the price, no used hardness tester is worthwhile. Better to spend a little more, but with a guarantee. More info schuetz-licht.de/produkte/haertepruefer/haertepruefgeraete-rockwell/ha ertepruefgeraet/

Hardness tester Manufacturer: Stiefelmayer with drawer Cabinet For more info please see photos

Copley tablet testing complete lab suite, supplied new in 2018 and in as new condition, complete with manufacturers manuals. Comprising of the following items of equipment. Dissolution 8000. 8 bath dissolution with printer DissoMate Degasser station DTG 4000. 4 bath dissintegration with printer FRV 2000. 2 wheel friability, variable speed TBF 1000. Tablet hardness tester with keyboard input and printer

Test force: 250 kg checking height: 0-270 mm kind of tests:: Rockwell workpiece depth: 160 mm weight of the machine ca.: 88 kg dimensions of the machine ca.: 200 x 500 x 800 mm This hardness tester Frank 532 comes from a training company and has been maintained more than second hand. The general condition is according to the age, very good, all functions have been checked. - Table with manual adjustment - with precision dial indicator for direct reading The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Various workshop equipment: .  , - N.1 Workbench with wooden top , 100 kg, 700x1000x1000 mm. - N.3 ionization units , 600 kg, ,2500x1200x2000 mm ( 3 ionization units each 1000 x 800x2000 mm, with tanks 200x1000 mm). - N.1 Electrical cabinet , 80 kg, 800x1200x1200 mm. - N.1 GALILEO ,ERGOTEST COMP 25 hardness tester, 100 kg, 600x250x1000 mm - , N.1 Chiller MTA TAE051 ,year 2001 , ,215 kg, ,1600x800x1600 mm (400 V, 50 Hz, 14 A, 7.8 kW, IP54, refrigerant  ,R407C, Maximum pressure 26 bar, maximum temperature 65°) - , N.1 FAC electric pallet truck , 800 kg, 1800x800x2000 mm (With battery charger) - N.2 workshop chest of drawers ,AMOS , 160 kg, 1400x750x1050 mm (each 80 kg, ,700x750x1050 mm) - N.1 MECATOOL workbench with drawers, 100 kg, 1400x800x1300 mm (including drawers) - N.1 Hydraulic equipment for handcrafted package  ...