135,187 used machines on RESALE, but how to find them? Machine Search
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OE 1,5kW / VF1530-1500W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 12.0mm, maximum thickness 16.0mm - Stainless steel: Recommended thickness 5.0mm, maximum thickness 6.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 4.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0m ...
BENHIL BUTTER PACKER MODEL : 8311 FORMAT : 250grams Capacity : 40pcs/min Hopper Feed Condition : Fully Refurbished
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. Th ...
rejected according to the report Auction-ID: A1-47168-374
NUMBER OF SPINDLES 21 SPINDLE DISTANCE 32 MM DISTANCE BETWEEN FIRST AND LAST SPINDLE 640 MM DOWEL DRILL HEAD BY MAGGI MADE IN ITALY
Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...
Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards
I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.
Power: 5.5 kW, saw blade Ø 650 mm, cutting range approx. 250 mm Auction-ID: A1-47168-43
- Manufacturer: Bekum - Machine type: BAS 34.2 - Stations / Stations: Single station / Single station - Year of construction / Built: 2001 - Location Germany - Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Mold dimensions mm /mold dimensions mm (A length/ length x B width/ width x C depth/ depth): 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight (kg): 13000
This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.
Control Siemens ... Sinumerik 808 E Turning diameter ... 500mm Rotation length ... 1500mm Spindle bore ... 82mm Turret The machine is in good condition, possible to test under power.
honing diameter: 125 mm stroke: 600 mm throat: mm Control: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 7,5x5,2x4,4 m Unique honing machine built for inline motor blocks and v-blocks. Universal also for other parts because of the controlled movement of the table in y and the spindle in x. Movement x: 2000mm Movement y: +-150mm -2 step expansion SMA/HDA (mechanic/hydraulic) -In process air gauge Honing methods: -Normal honing -Short honing -Makro form Stop methods: -mechanical expansion: Step-automatic or air gauge automatic. -hydraulic expansion number of strokes, honing time or air gauge automatic. -Possibility of changing of spindle rotation direction after number of strokes while honing process. Machine like new with only 4.800 switch hours. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Packaging machine - Flowpack Multi 30 horizontal packer Film width: 300mm Passage height: 40mm Packing speed: up to 120 pcs / min
CNC Lathe Manufacturer: Gildemeister Type: CTX 410 V3 Machine No.: 0136004581 Year of Make: 2006 Control: Siemens 840D ShopTurn Circumferential diameter: 505 mm Chuck diameter: 210 Spindle passage: 65 mm Drive power: 40/ 100%ED 21/28 KW Speed range from – to: 25-5000 Dimensions approx.: 4300x2000x1800 Weight approx.: 5600 Kg - 12-speed revolver - VDI 40 - C-axis - Powered tools 12 stations - Package bar machining - Chip conveyors - Tailstock - SMW Autoblok 210BB - Driven tool holders 3x axial - Driven tool holders 2x radial - Various other tool holders - New engine for revolver Errors excepted
Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm
internal diameter: 340/440 mm grinding depth: 9999999999999999999999999 mm swing diameter: mm grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.geometrical overh ...
Lapping machine Wentzky - Lapping discs diameter 700 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 70 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 3.5 mm Bandwidth: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm
Skin area: 345 x 495 mm Part size: Max. approx. 120 mm Carton size: 345 x 495 mm Film width: 390 mm Including roller punch / cylinder punching machine Illig ZSM60 Contact details for ordering SKIN foil and cardboard available. Prior sale reserved - errors possible. Internal Reference Number: D-1149
Gehring Honing Machine E 630-45 - Honing diameter: 3 - 45 mm - Honing length max: 350 mm - Number of honing spindles: 1 - Stroke length: 2 - 630 mm - Electric lift drive - Lifting speed: 1 - 40 m/min - Stroke control: infinitely variable - Spindle speed: 150 - 6000 1/min Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm
FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...
Used labeling machine P.E. LABELLERS model Universal M / S 6T / 540 / 2S-2E Power required: 3kW Required pressure (demand): 5 bar (15 l / min) Capacity: 80 pcs / min (jars - 1 format) The device allows labels to be applied to the front and back of the package. The device is equipped with one type of format. When using other formats, it is possible to cover jars of 0.3-0.9 liters. The device has a buffer sensor for jars that are fed into the labeller. A cold label gluing system is used.
According to photos, weight approx. 100kg. Auction-ID: A1-48554-127
Format range: 1400 x 1400 mm stack height 1300 mm Equipment: motorized format setting via remote control, pneumatic lateral alignment, Siemens control, Non-stop setup. Overhaul 2022: cleaned, tested, painted. Other: Stackers can be viewed in operation by arrangement.
Universal trailer sweeper, hydraulic drive by means of PTO plug-in pump (also directly hydraulically possible), sweeping width min. 1600 mm, sweeping width max. 1,900 mm, dust binding with water and spray nozzles (200 ltr. plastic tank). Sweeping container 700 ltr. (emptying hydraulic, tilt height up to 1500 mm), sweeping roller pressure adjustable. Side broom trimming currently steel bristles – also suitable for weed removal. Operation of the machine via cable remote control. YOC 1998. Field of application: Community paths, squares, leaf pick-up, litter pick-up, weed removal, etc. More used sweeping technology in stock, just ask us!
Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg
Commercial Joint Pre-Roll Machine for Condition: very good / NEW FEATURES 72, 143 or 453 Pre-Rolled Joints Significantly Faster Than Competitors Durable & Built for Commercial/Industrial Use Food-Grade Components Designed, Manufactured & Assembled in the USA OSHA Compliant
This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details.
Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg
Mobile wrap-around labeller with roller conveyor for cylindrical products incl. hot air system WILUX.
Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details.
Description Domino M230i T4 The ability to use stroke lengths of 0 – 360 mm and the auto-stop function to interrupt movement when touching an obstacle make the M230i-T4 label dispenser the most versatile and safe labeling system available on the market today. It is immediately available and ready for use Viewing possible at any time If it does not fit, there is always a large number of different labelers in stock. Talk to us and we will find the right one for you.
Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details.
automatic TENONER machine BALESTRINI 2TAO for production of chairs , sofà , bedrooms , furnitures , etc. volt. 380/50
(Serial No. M12/42), Flatpile Feeder, Overhead Control Panel, 4 Pockets, 1 Cross Fold Knife, Delivery
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
BÜHLER ECOLINE S PRO 34 die casting machine was built in 2018 in Switzerland by Bühler AG. The machine was used occasionally and is in very good technical condition. The BÜHLER ECOLINE S PRO 34 is designed for the die-casting of aluminium alloy components. It enables the efficient, mass production of aluminium castings used, among others, in the automotive, electronics and machinery industries. In the die-casting process, liquid aluminium is injected under high pressure into a closed die. Once the die is filled, the material cools and precisely takes on the die’s shape. The combination of this technology with a high clamping force of 336 tonnes enables the production of repeatable castings with even the most complex geometries. The BÜHLER ECOLINE cold-chamber die-casting machine is part of a complete production line designed for aluminium die-casting. It includes an ABSOLENT ...
workpiece length ... 3065mm max. šWorkpiece width ... 1560mm tPlate thickness ... 20mm Laser power ... 3000W Fiber Axis Z ... 150mm L x W x H ... 9797 x 3757 x 2200mm Machine weight ... 10000kg The machine is in good condition, possible to test under power.
maximum number of results exceeded
please refine your search
10 € 
