135,187 used machines on RESALE, but how to find them? Machine Search
Werner Pfleiderer Double Conus Kneader used unfortunately no type plate available, we assume DK65, for which we do not guarantee Machine in condition as returned by the customer, was overhauled according to the previous owner smooth and smooth running, machine automatically switches to the second stage Timer adjustable for 3-30 minutes, head then lifts independently Machine also runs with the head open or can be lifted during operation, this should be corrected before use by means of limit switches The machine must be thoroughly cleaned before use Video about test run and other pictures available
Hohner Economy 25/40 wire stitching machine; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with the clamp folded down, 40mm with the clamp not folded down; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.
Type: Vemag LPG 202 The LPG 202 length portioning machine links sausages with identical lengths and weights It can process cooked and raw sausage in natural, collagen and cellulose casings The LPG 202 length portioning machine is compatible with the following filling machines: AVG 201 ROBBY / ROBBY 2 ROBOT HP-series ROBOT DP-series Sausages are produced in the calibration range from 14 to 40+ mm Link all types of casing Extremely accurate lengths and weights Gentle treatment of casings Linking speed can be adapted to the type of casing Hygienic operation Casing magazine for artificial casings (optional) Device to detect ends of natural casings (optional) Delivery time: Machine is ready for delivery
JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE
Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS
Schickart TS 38 Bread Slicer - Bread slicer with round knife - Table machine - with cutting width adjustment - 400 volts
Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment
Collator Year ca. 1988 20 Stations Collator, with Stiching Unit and Trimmer
1 SANTONI seamless circular knitting machine type SM8-EVO4, cylinder diameter 16", 1216 needles, gauge 24, year 2006, creel for 24 bobbins. This machine was bought for development and has not more than 300 real working hours
ACCTEK AKM2030 CNC router was built in 2020 in China by Jinan Acctek Machinery CO., Ltd. The machine is designed for the precise milling, cutting and engraving of parts made from materials such as wood, MDF and plastics. Its large work area, combined with a stable design, makes the machine ideal for both one-off projects and mass production. All machining processes are performed using a high-performance electro-spindle with a maximum speed of 24000 rpm. The rotational speed and torque are controlled by an inverter, allowing the operating parameters to be adjusted to suit the current task. The electro-spindle is also equipped with a cooling system, which helps maintain stable parameters during intensive use of the machine. Individual axes are driven by high-torque stepper motors. These move along precision linear guides, ensuring accurate positioning and repeatability of the parts p ...
Dough pre-portioner W&P for WP BV-700 dough dividing machines - Dough pre-portioner from WP Haton - for WP BV 700 dough dividing machines / dough weighers - with pedestal and ladder - in stainless steel - Year of construction 2014
1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter, ...
GE mobile X-ray machine VMX • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany and can be picked up immediately. • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!
1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected
A Caser-Saimp universal milling machine in need of repair but still operational is offered. Spindle taper: ISO 40, table size X/Y: approx. 1300mm/265mm, travel X/Y/Z: approx. 750mm/265mm/430mm, max. spindle speed: 1700rpm, spindle drive power: approx. 4kW. The X-axis can no longer be moved using the power feed. A servo motor was retrofitted to the X-axis (white assembly). Inspection possible by arrangement.
Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible.
Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.
Small SHIMA SEIKI knitting unit composed of: 1 SHIMA SEIKI flat bed knitting machine, type SES122FF, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122RT, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122S, GG 7 1 SHIMA SEIKI design programming computer type DS ONE (E) Model VX2000, 1 SIMET electronic Winder with deknitting device model SED/6,6 winding heads, 6” traverse, works as a normal cone to cone winder and permits to recover the yarn from defective knitting clothes
Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.
Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.
1 MENSCHNER doubling / folding and measuring machine type RW 24/59 D, year 2001, folds article up to 300 cm in half it's width, with meter counter, with automatic selvedge control and overlaying device, entry with contact A-frame unwinder, mall roll or folded article, exit in roll of folded article, machine's motors are fully inverter controlled, with SIEMENS PLC type S7
This 3-axis EMCO Emcoturn 65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details.
Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.
Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.
1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch
Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.
This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details.
This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details.
SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!
Plasma cutting machine manufactured in 2020. This PLASMACUT 3015T features a cutting area of 3,020 × 1,520 mm and a maximum plate thickness of 50 mm. It includes a robust gantry drive system and operates with a Hypertherm Powermax 105 Sync plasma power source. If you are looking to get high-quality plasma cutting capabilities, consider the PLASMACUT 3015T machine we have for sale. Contact us for further details regarding this machine.
CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details.
Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg
round material: 30 x 1 mm square material: 30 x 30 x 1 mm : 16 mm : 30 x 10 mm speeds: 9 U/min total power requirement: 1,1 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC punching machine manufactured in 2007. This AMADA EMZ 3610 NT features a press force of 300 kN and a travel distance of 2500 mm in the X-axis and 1525 mm in the Y-axis. It has a maximum material thickness capacity of 4.5 mm and a stroke rate of 1000 strokes per minute. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for further details.
Hydraulic shearing machine manufactured in 2002. This HERA TS 2000x6 features a maximum sheet thickness of 6 mm and a cutting length of 2080 mm. It operates with a stroke rate of 18 strokes per minute and is powered by an 11 kW motor. If you are looking to get high-quality shearing capabilities, consider the HERA TS 2000x6 machine we have for sale. Contact us for further details.
This 3-axis Wenzel LH 65 was manufactured in 2018. It features a measuring range of 650 × 750 × 500 mm and includes a Renishaw PH6M probe head with a TP200 probe. The machine is equipped with online temperature compensation and active vibration damping for enhanced precision. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 65 CMM machine we have for sale. Contact us for further details.
Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:
Precision Mechanical Machine Vise manufactured in 2016. This TRIGO SCS 120-250 features reversible jaws with a jaw width of 120 mm and a trapezoidal spindle drive mechanism. It offers versatile mounting configurations for horizontal, vertical, or lateral clamping. If you are looking to get high-quality clamping capabilities, consider the TRIGO SCS 120-250 machine we have for sale. Contact us for further details.
Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details.
Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes
maximum number of results exceeded
please refine your search
200 € 
