handtmann machine used for sale

The Poly Clip 3430-18 automatic double clipping machine sets the gold standard for high-capacity, reliable production of sausages and cured meats. Manufactured by the globally renowned Poly-clip System, this machine achieves an impressive speed of up to 200 cycles per minute (depending on portion size and casing type), ensuring maximum efficiency for your production line. Highly versatile, it is engineered to work seamlessly with a wide variety of casings, including plastic, collagen, cellulose, and natural casings. It accommodates a caliber range from 24 to 90 mm, and can process up to 120 mm for specific plastic casings. The intuitive touch screen interface allows operators to easily set and adjust operational parameters. The unit is designed for flawless synchronization with various vacuum fillers and offers the possibility of integrating an automatic loop dispenser, significantly st ...

ID3809 Hut HBR202 year/Baujahr 1998 Drilling rig, diesel engine, KDK 3 SHG 1000 (3-speed), telescopic crawler chassis, machine fitted for HDI, additional accessories (additional flushing head (for HDI), standard drill head, approx. 20 m of drill pipe (1 m long)), optional HDI pressure measurement system (year of manufacture approx. 2022) available Drilling rig, diesel engine, KDK 3 SHG 1000 (3 gears), telescopic crawler chassis, machine mounted for HDI, additional accessories (additional flushing head (for HDI), standard drilling head, approx. 20 m drill pipe (1 m long)), optional pressure measurement system HDI (year of construction approx. 2022) available

Bakon cream blower Type: Top Cream 530 Year of construction: 2011 Stainless steel digital control Temperature indicators 1.5kW As good as new condition Height: 115cm Width: 50cm Depth: 64cm

6cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested

ID3811 Klemm KR805-3GW year/Baujahr 2018 5.360 hours/hours Double-head drilling rig (drilling drive for outer casing KH 32G (outer casing 152.4 and 177.8 mm), drilling drive for inner drill string KH 22 (inner drill string D95)), with mounted Fassi F85BF.1.23.E crane; includes 80 units (2 m each) of outer drill string (D177.8 x 8.8 mm), 80 units (2 m each) of outer drill string (D152.4 x 8.8 mm), and 80 units (2 m each) of inner drill string (D95 x 8.8 mm), plus crossovers, spacer pieces, adapters, preventers, drill bits, etc. Double-head drilling rig (drill drive for outer pipe KH 32G (outer pipe 152.4 and 177.8 mm), drill drive for inner rod KH 22 (inner rod D95)), with mounted crane Fassi F85BF.1.23.E, incl. 80 pieces of 2 metres - outer rod D177.8 x 8.8 mm m, incl. 80 pieces of 2 metres - outer rod D152.4 x 8.8 mm, incl. 80 pieces of 2 metres - inner rod D 95 x 8.8 mm, plus the  ...

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

Hartmann bread slicer and packaging line Hartmann Slicer SL 20 Year of construction 1998 Hartmann Automat GBK 220 Year of construction 1991 Bread slicer and packaging line Compact for whole breads and individual slices with closure Digital Screen Panel with air/compressor connection with new knives 230/400V 50Hz Total Kg: 1800kg 2 whole lines in stock! Directly from the bakery

NAKAMURA TOME WT-100 CNC Tower TECHNICAL FEATURES: Year: 2012 NC Type: FANUC 31i-B Distance between spindles: 735 [mm] Maximum diameter Turning time: 190 [mm] Maximum length Machinable: 503 [mm] Y-axis travel: -31 / +31 [mm] Z1 axis stroke: 503 [mm] X1 axis stroke: 135 [mm] Z2 axle stroke: 503 [mm] X2 axle stroke: 135 [mm] X1 Axis Fast Forward Speed: 16000 [mm/min] X2 Axis Fast Feed Speed: 16000 [mm/min] Z1 axis fast feed speed: 40000 [mm/min] Z2 axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 6000 [mm/min] Spindle Nose: A2-5" Maximum diameter in bar turning spindle: 42 [mm] Spindle Bore: 56 [mm] Maximum speed Spindle: 6000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter Spindle Nose: A2-5" Counter-spindle bore diameter: 56 [mm] Counter-spindle stroke: 525 [mm] Maximum speed Spindle: 6000 [rpm ...

Key data: 460 mm, 705 mm, 3500 1/min

Sell a DMG T2 CNC lathe from 2023 with 1m bar feeder IEMCA The machine is in good condition and offers: • Modern Siemens One CNC control with touchscreen operation • Driven tools, C axis, short bar loader 1m, tailstock, chip conveyor, hydraulic chuck 250mm, tool measurement 5 driven tools, various tool holders • Robust design for professional use • Compact design with high performance • All protections and safety features The lathe has been regularly serviced and is ready for immediate use. Machine is still in operation. Ideal for workshops, prototyping or smaller series production. Price plus VAT If you have any questions, please feel free to contact us.

Diosna Spiral Kneader Type: SP 160 AD extendable spiral kneader for a maximum of 160kg of dough or for a maximum of 100kg of flour with 2 timers Automatic switching on and off via clocks Stainless steel flour dust cover 2 speeds (gears) slow and fast Boiler locking via pliers operated with hydraulics suitable for almost all doughs robust and strong Trade-in, delivery and assembly on request Vat capacity 260 litres

Used aluminium tube filling machine made by the Italian company IMA Comadis model 720 A. The Comadis 720 A is an automatic tube filling machine, designed specifically for metal tubes with a maximum diameter of 35 mm. This linear automatic machine is equipped with a crimp-sealing head and a tube orientation system, ensuring precision and efficiency in the filling and sealing processes. The machine features a conical product hopper with a heating/cooling jacket, located at the top of the unit, which facilitates a smooth flow of material. The unit is enclosed in a transparent protective housing, which ensures safety whilst allowing operators to visually monitor the filling process. Access to the interior is provided by transparent doors with handles, facilitating maintenance and cleaning. The control panel is fitted with a range of buttons and a clearly marked red emergency stop button,  ...

Graef Euro 2250 Knife diameter 220 mm Cutting height 155 mm Cutting length 220 mm Cutting thickness 3-15 mm Tabletop unit Footprint 460 x 320 mm Stock: 50 pieces

Puller / Puller apparatus for transverse ovens (80cm) Fits for ovens that are 80x60cm. Bottom puller Condition: New 10 pieces in stock

Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

King Regius Spiral Kneader Type: SP 125 Spiral kneader extendable with 2 stainless steel boilers digital film control with emergency off for max. 125 kg dough content per kettle Stand-up machine 400 Volt high current connection 2 Speeds Flour dust cover Year of construction 2004

Rademaker SprayIng Machine Type: Pump System Year of construction 2012 4 rows Injectors System with compressed air with large funnel Stainless steel cladding 400V 50Hz on rolls Height: 193cm Width: 160cm Depth: 140cm

Universum Winding Machine Type: LWT -3 - EB 2-40 with transport work table wood Long castors and flat castors Stainless steel cladding 380 V 50Hz on rolls Dimensions universe: Height: 170cm Width: 170cm Depth: 80cm Dimensions table Height: 85cm Width: 200cm Depth: 100cm

Treif bread slicer Type: Pegasus Sichelmesser Machine Cutting width: 4 – 14 mm adjustable analog control Stainless steel cladding 380V 50Hz Height: 120cm Width: 100cm Depth: 80cm

Benier Dough Weigher Type: B84 1 chamber with compressed air Stainless steel cladding Speed adjustable Weight range 300-1500gram Baker's condition, as it is out of the bakery without cleaning or testing

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Rego Herlitzius Roto Shop DL Circular knife machine Stainless steel version mobile Knife reground and coated manual operation via rotary knob Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread shaft: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Cleaning machine

Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm

Recording table Bourg TD-T for gathering machine c.p. burg

30 ton 1250 x 2500mm

Puller / Puller apparatus for stoves for a long time Fits for ovens that are 60x80cm. (60cm wide x 80cm deep) Bottom puller Condition: New 20 pieces in stock

UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,

Baguette Long Scooter Kemper FR Kombi - Baguette long scooter from Kemper - Model FR COMBI - Stainless steel clad - with outlet table - can be driven on castors - 400 Volt 50Hz

Diosna spiral kneader W 240 - 3 boilers - 400kg dough - after repetition - industrial mixer

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Meurer high speed wrapper type: CM/HEM 60 Grouping and shrinking of beverage packages. Fully automatically grouped, wrapped and shrunk in PE shrink film. the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format .

Machine spirit level, block spirit level, frame spirit level, straightedge level, precision spirit level, frame straightedge level, precision machine spirit level -Manufacturer: Fr. Keilpart, Precision machine spirit level -Reading: 0.03 mm/m -Box dimensions: 220/65/H70 mm -Weight: 2.1 kg

Impact machine stirring machine Rego SM 3 E / SM 2000 overhauled with automatic timer 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft new Boiler stroke electric Boiler lighting Connection 400V, 16A-CEE plug Used machine overhauled

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Machine spirit level, block spirit level, frame spirit level, straightedge level, precision spirit level, frame straightedge level, precision machine spirit level -Manufacturer: Herlitzius, Precision machine spirit level -Reading: 0.40 mm/m -Box dimensions: 180/70/H50 mm -Weight: 1.0 kg

groove width: 3 - 90 mm drawing length: 430 mm working speed: 4 - 12 m/min slot-milling length: 400 mm return speed: 15 m/min total power requirement: 5,5 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 1,3 x 1,7 x 1,5 m • div. pull broaches and guidances The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.