handtmann machine used for sale

Kneading machine Spiral mixer Kemper SPL50 for 80Kg dough Spiral kneading machine Kemper SPL50 for the production of high-quality doughs. The machine has two speed levels, slow and fast, as well as automatic operation which runs via 2 timers. The boiler, the spiral and the guide rod are made of stainless steel. The boiler can be switched to both counterclockwise and counterclockwise rotation. The machine is equipped with new wear parts, 2 new Schleicher timers and the machine has been completely repainted. - Manufacturer: Kemper - Type: SPL50 - Capacity for a maximum of 80 kg of dough or a maximum of 50 kg of flour - 2 speeds: Slow and fast - 2 timers for automatic switching on and off - Manual or automatic rotation selectable - Kneading time per speed adjustable up to 12 minutes. - Boiler with clockwise rotation and counterclockwise rotation - Flour dust cover with saf ...

Milling machine from Reckermann: TYPE: DELTA1300 K X(Longitudinal)/Y(Transverse)/Z(Vertical): 1500x 500x 450 mm Tool holder DIN 2080: SK50 Works flawlessly

Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, drive motor 7.5kW, feed motor 0.26 - 0.55 - 1kW, pneum. Belt oscillation and belt blow-out, incl. landing gear

SMD Production Equipment for Sale Hybrid Pick-and-Place Machine - Model: HP-110/110 Ver 1.3 - Condition: Used - Included: Bambi air compressor Reflow Oven - Brand: Dima - Model: Breeze SMRO-0253/0503 Manual SMD Placement Machine - Brand: Dima SMT Systems - Included: JUN-AIR compressor Screen and Stencil Printer - Brand: EssemTec - Model: SP002 The used Hybrid P&P automatic placement machine, type HP-110/110 Ver1.3, built in 2004, including Bambi Air compressor. The following feeders are included with the placement machine: SMCS-4016 - 2 pieces SMCS-4008 - 60 pieces SMCS-4008-1 - 20 pieces SMCS-4012 - 10 pieces SMCS-5000 - 2 pieces Tray holder - 1 piece 1 piece Dima Reflow Oven Breeze SMRO-0253/0503 Year of manufacture 2004 1 piece SMD manual placement Dima SMT Systems with JUN-AIR compressor Year of manufacture 2004 1 piece EssemTec SP002 Screen and stencil printer Ye ...

Used can seamer made by KZ. Can diameter: fi 99. 2 pieces available.

spindle diameter: SK 30 mm x-travel: 420 mm y-travel: 240 mm Control: Heidenhain TNC 355 total power requirement: 10 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2 x 2 x 2 m No. 5356 Vertical drilling and milling machine FEHLMANN Picomax 51 CNC 3 Working area: 420 x 240 x 120 / 450 Drive: 4 kW Control: Heidenhain TNC 355 Table 720 x 280 mm / 120 kg load Spindle holder Speed range 55 - 9,000 min-1 Space requirement approx. 3 x 2 x 2.4 m Weight approx. 1,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Deckel FP4 NC BJ 1987 Specifications •Travel: o X-axis: 560 mm o Y-axis: 500 mm o Z-axis: 410 mm • Includes tool cabinet and various tools (see photo)

x-travel: 560 mm y-travel: 300 mm z-travel: 420 mm table-size: 1055 x 240 mm spindle taper ISO: Sk 40 spindle turning speed range: 40 - 1550 U/min quill stroke: mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions: 1,6 x 1,5 x 1,85 m Universal milling machine - Digital display - Chip guard - Coolant system - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Machinable tool: max. 230 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Replacement Grinding Wheels

Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation

Key data: 300 mm, 150 mm, 300 mm

Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

We offer you a labeling machine from a current recycling. The machine was used to apply adhesive labels from the roll to hangtags (tag labels). Year of Make: 2022 Condition: good Hours: ./. Asking price: 15.000,00 VHB Original price: 35.000,00 Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202 – 25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location:68753 Waghäusel The sale is without warranty Subject to prior sale

Overhauled battery head 12 ltr in very good condition

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043

Max. size= 92 x 92 cm, Availability= 112025, Working width 920mm Stack height 120mm Programmer unit Central air table Side tables with air Chrome table surface anti rust Photocells CE Hydraulic drive of the pressure beam with fully adjustable force Spare knife, operating tools Weight app. 1700 kg 380V power supply LOT Loaded in truck or container

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

grinding length: 500 mm grinding width: 250 mm workpiece height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Weipert

max. wheel diameter: 1000 mm gear width: 180 mm max. module: 7 min. module: 0,5 min. ram stroke: 16 mm max. ram stroke: 180 mm table hole: 160 mm total power requirement: 4 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

G&J C85, Clean Out Unit

plate thickness: - mm throat: - mm distance between roll centers: - total power requirement: - kW weight of the machine ca.: 160 kg dimensions of the machine ca.: - m No accessories For rolling beads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 6300 mm swing diameter: 7000 mm turning height: mm ram adjustment: mm cross rail adjustment - vertical: mm ram head - cross travel: mm ram swivable +/-: ° main drive: kW table revolutions:: 0 - 14 U/mn workpiece weight: 75 /125 t ram head dimension: mm total power requirement: 170 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 10 x 10 x 7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm

pressure: t plate thickness: 5 mm sheet width: 40 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 762 mm grinding length: 5500 mm centre height: mm workpiece weight: 10000 kg grinding wheel size: 762 x 76 x 304,8 mm grinding wheel turining speeds: 1 -750 U/min turning speed range - workpiece: 14,5 - 86 U/min main drive motor: 14,8 kW workpiece drive: 5,5 - 7,35 kW grinding head infeeding speed: 0,00635 - 0,0508 mm/min table speeds: 101 - 2021 mm/min total power requirement: ca 25 kW weight of the machine ca.: 27 t dimensions of the machine ca.: 13,5 x 3,35 m Machine complete with: - 9 x steadies. - Coolant/Filtration Tank. Machine has had over 80.000€ of engineering maintenance work/overhauling in 2023 including replacement of air bearing liners. 7 x steadies fully overhauled. Overhaul of top table & centre heights of workhead & tailstock. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1250 mm, 1 mm

with the following equipment: segmented with quick-clamping system Segment height: 100 mm Division of the segments: 8 x 100 mm 1 x 30/40/50/60/70 mm 1 x right corner 100 mm 1 x corner left 100 mm with engraved measurement numbers in upper and bending beam segments incl. wheels Extras: with window sill insert for the production of head edges, segment height 100mm with depth stop with T-slot rail Working length: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle (max.: 150 mm Machine number: UK 20361

Mixing plant/fresh concrete, with PEMAT mixer, winterproof with heating Sauter/gas, capacity 45-50 m³/h - Binder: 2x60 t (30x30)t & complete silo technology & cement screws - Aggregates: Bucket elevator via revesier belt in chambers (chimneys new about 3 years ago) Boxes/volume = 5 chambers (40,40,30,70,30)t, incl.: moisture measurement, incl.: mixer feed = weighing container (3000 kg) to the inclined belt (cleats) in mixer - Additives: incl. storage/volume: Second-chamber scale 25/5 kg - incl. spirit level: container scale 300 kg - Mixer : PEMAT - Partial mixer 1.25 m³ with 2 mech. Whirling

Key data: 1300 mm, 150 mm

Breitbandschleifmaschine Boere wide belt sander SANDRITE 1300 C-SP-V8 Specifications: • Only approx. 100 operating hours (comes from 1-man operation) • Commissioning took place in 2021 • 1-belt machine with full equipment • Machine is still in operation • 400 V, 50 Hz, 26 A, 13 kW, 2,380 kg • 1,300 mm sanding width • Vacuum carpet • 3 – 150 mm sanding height • 70° Shore • 2.5 – 11 m/min feed speed • Pressure shoes for intermediate lacquer sanding, veneer sanding and callobaring • approx. 30 abrasive belts still available Year of manufacture: 2018 Price: €25,000.00 plus VAT Available from: immediately Terms of delivery: ex site – EXW (Kassel district) Recommendation: Drive to the loading ramp with a truck and move with a pallet truck Payment Terms: Payment before pickup Accessories without guarantee. The following app ...

Specifications: Areas of work: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 1/min Grinding area, max.: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing machine, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table-spindle center: 800 mm Table height: 900 mm Table load, max.: 2200 kg Weight, approx.: 12,000 kg Equipment: - Control Siemens SINUMERIK 840D, control panel OPO12 -System - Electro-magnetic clamping plate - Full-space encapsulation -Central lubrication - Mist extraction - Clamping system for autom. Disc replacement - Coolant device - Cooling water recooler

Used Ziegra UBE 10.000-2 streamice machine set on R404A that makes up to 10.000 kg ice each 24 hours. Complete with 4 Ziegra 1500 / 2500 ice makers, 2 Bitzer 6G-30.2Y-40P semi-hermetic reciprocating compressors with each an own suction accumulator, oil separator, liquid tank and liquid line filter drier. Further the ice machine set comes with 2 ECO ACE62B4H condensers and a Siemens Simatic touch panel. If you would like more information, please feel free to contact us. Specifications: Brand: Ziegra Type: UBE 10.000-2 Capacity: 10.000 kg/24h Refrigerant: R404A Dimensions: Part 1: 1800x1200x2880 mm (LxWxH) Part 2: 1380x1100x2500 mm (LxWxH) (2 Pieces) Condensers: 2450x1100x990 mm (LxWxH) (2 Pieces)

SPECIFICATIONS: Chain operation Vertical Machining Voltage: 380 V

ROMACO NOACK BLISTER PACKAGING LINE, UNITY 300 Year of construction: 2022 Packaging line composed of a single-track blister machine with rotary sealing and a continuous motion cartoner. Modular line ready to be connected to different track & trace systems and end of line packaging solutions. PRODUCTION - Output blisters/minute: 300 max. - Output cartons/minute: 10 – 300 (min-max) - Forming cycles/minute: 100 max. - Die-cutting cycles/minute: 300 max. - Foil width max: 165 mm - Forming area max: 190 × 150 mm - Die-cutting area max: 100 × 150 mm - Forming depth max: 12 mm - Forming material reel diameter max: 700 mm - Lidding foil reel diameter max: 300 mm - Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) DIMENSIONS - Machine dimensions (L × W × H): 8,270 × 1,890 × 2,230 mm - Weight (approx): 5,300 kg  ...

YORK chiller type YLCC-H 102V In good condition Cooling capacity : 96,1 KW Nominal power :19,1 KW (x2) Power : 400 V - 3,5 Hz R407C Weight. : 1 133 kg

Centerless grinding machine, PARAGON RC16, 200400 G.W., through-feed grinding, under power in our warehouse (see video)

turning diameter: --- mm turning length: --- mm control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1400 mm gear width: 400 mm max. module: 25 min. module: 1 total power requirement: - kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 3,0 x 1,2 x 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table

Year of manufacture: 1989 / 2018 overhauled Single head max nozzle 180 mm PWDS (Feuerherm) Control: Beckhoff Operating hours: since overhaul 2018

used weigher Kemper Imperator, overhauled, with 1 chamber, with lubrication, for small and large weights, hopper for approx. 200 kg dough, hourly output up to 1,500 pieces / h, weight range 200 to 2,300 g

bore capacity in steel (diameter): 40 mm throat: 230 mm bore stroke: 130 mm taper MK: 4 MK table-size: 400 x 315 mm feeds: mm/U turning speeds: 105 - 1257 U/min total power requirement: 2,55 KW weight of the machine ca.: 0,35 t dimensions: 0,8 x 0,6 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 100 Cette machine d’injection soufflage PROCREA REV 100 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 5 cc. à 750 cc. et poids de 5 gr. à 100 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 4 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 100 est très simple grâce au système automatique d'extraction appliqué au revolver.

Wire stapling machine with 2 stapling heads for 0-25mm stapling

Planing machine / finishing machine Manufacturer: Marunaka Model: Royal FX Squeegee Blade Bottom Cutting width depending on the cutting angle max. approx. 250mm Workpiece height max. 180mm 2 machines mounted on trolleys.

A used cutting machine Polar 92 EM Air table Side Tables Program

REF-2720 ULMA ATLANTA FLOW WRAPPER WITH PHOTOELECTRIC EYE AND DOUBLE SEALING JAW Manufacturer: ULMA Model: ATLANTA Year: 1998 Horizontal flow pack wrapper (HFFS) equipped with photoelectric eye. Double film reel and double sealing jaw. Voltage: 380 V / 50 Hz / 16 A / 3Ph Total power: 3,5 kW Output: up to 250 p/min (depending on film and product) Pneumatic consumption: 50 litres/min; 6 bar Sealing jaw dimensions: 200 x 50 mm (WxH) Overall dimensions: 7,000 x 1,300 x 1,650 mm (LxWxH) Weight: approx. 910 kg

Year of Make: 2004 Clamping force: 60to (588kN) Working hours: 48,930 h Accumulation head - BFKS 6.3 Climbing Unit Max Opening: 1,450 mm Column passage: 900x1200 mm

Reference Num.: 4318 Brand: Xerox Type: DC 700 Construction year: 2013 Impressions: 4 mio Available: directly Status: In production Location: Deutschland Equipment: - Duplexdruck - Scanner - Broschürenfinisher - Fiery

Reference Num.: 4348 Brand: MAN Roland Type: PR 01 Construction year: 1990 Impressions: 9 mio Size: 480 x 660 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 280 mm, max 480 x 660 mm Printing speed: max 10,000 sheets/hour Printing units: 1 Machine size: Length: 1,720 mm, Width: 1,450 mm, Height: 1,605 mm Total weight: kg 2,190 / lbs 4,828 Power: KW 7 / hp 7

Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.

A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible.