handtmann machine used for sale

Spline shaft Grinding machine STANKO 3M451B/1500 with accessories.

FORMIT COMBI-1000 INDUSTRIAL POTATO PEELER Manufacturer: FORMIT Model: COMBI-1000 Voltage: 400 V / 3-phase Total power: 6.25 kW Industrial peeling machine for potatoes and other round or oval vegetables (for example carrots, parsnips, beetroots, turnips, sweet potatoes, etc.). Double peeling system through an abrasive peeling element and a knife peeling element: the peeling rollers are in part abrasive, in part fitted with knives. The product must be cleaned beforehand (washed or brushed). No water is required during the peeling process. Water is only needed for cleaning the machine. Made of AISI 316 stainless steel. Overall dimensions: 2,990 x 1,100 x 2,206 mm (L x W x H) Frame length: 2,280 mm Infeed hopper width: 500 mm Infeed/Outfeed height: 1,642 mm / 1,254 mm Overall weight: 1,250 kg Max. product length: 200 mm approx. 9 peeling rollers Roller len ...

Horizontal chipper Horacle / machine no.: H2156/62HO - Feed width: 620mm - Max. feed height: 140mm - Vibrating trough length: 5m - Power: 28 kW - Rated voltage: 400V - Rated current: 55A - Control voltage: 230V - Fuse : 63A - Frequency: 50Hz

Portal milling machine MARIO CARNAGHI

Max. cone distance: 230 mm Number of teeth: 5-150 Diameter of taper hole at large end: 100 mm Taper: 1:19,7 Depth of taper: 150 mm Diameter of hole through spindle: 78 mm Diameter of spindle nose: 140 mm Max. offset above center: 114 mm Max. offset below center: 114 mm Max. distance from machine center to nose of spindle: 343 mm Min. distance from machine center to nose of spindle: 63 mm Cutter speeds: 17-115 rpm Feed (sec/tooth): 9-80 sec Floor space: 1900x2900 mm Net weight: 10750 kg

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998

REF-2391-B COMAS DRV 400 DOSING-DEPOSITING MACHINE WITH 5 NOZZLES Manufacturer: COMAS Model: DRV Type: 400 Serial no.: 3793 Year of manufacture: 2005 Dosing machine/depositor for the production of pastries Fitted with 5 standard conical nozzles (12 mm diameter) Voltage: 380V / 3-phase Working width: 400 mm Overall belt dimensions (mm): 2,200 x 530 (LxW) Overall machine dimensions (mm): 2,250 x 1,400 x 1,750 (LxWxH)

REF-2605 URSCHEL G DICING MACHINE Machine designed to cut vegetables and mushrooms into dice/cubes Manufacturer: URSCHEL Model: G Serial no.: 2450 Power: 2 HP Current cut size: 25x25x25 mm dice Overall dimensions: 1,500 x 1,200 x 1,150 mm (L x W x H)

weight: 2 t stroke: 500 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Milling machine PMER type S120 Travel X: 1200 mm Travel Y: 630 mm Travel Z: 600 mm Numerical Command ANILAM 5300 (Defective ANILAM screen changed by a PC screen + PC keyboard) Cone: BT 40 Spindle speed: from 50 to 6000 RPM Table size: 1600 x 500 mm Year of construction: 2002 Maxi distance spindle nose/table: 730 mm Mini distance spindle nose/table: 130 mm Diameter of the spindle sheath : Ø 150 mm Pneumatic tool clamp Central lubrication Lubricant pump Voltage: 380 V Width: 2300 mm Depth: 3600 mm Total height: 2600 mm Weight: approx 4,5 T

Used Alpina clipping machine type DKF 18.15. Technical data: Voltage 380 V Number of phases 3 Frequency 50 Hz Pressure 8 bar

Immediately available from location, CNC control Heidenhain TNC 155 Travel X: 600 mm Travel Y: 200 mm Travel Z: 150 mm Max. workpiece weight: 300 kg Table clamping surface: 800 x 300 mm Table height: 800 mm Spindle speeds infinitely variable 40-2000 rpm, Drive power 4 kW, Stepless feeds in all directions, Dimensions L x W x H: 2200 x 2700 x 2400 mm Weight approx.: 2000 Kg

gebr. Chain mortiser HEMA Type: MC40 Year: 1995 Motor power: 2.2 kW (380V / 16A plug) Mortising depth: max. 180 mm Chain width: max. 40 mm Slot length: max. 230 mm Transverse stroke milling unit: 150 mm Table tilt: 45° Milling unit can be swivelled by 45° on both sides Weight: 350 kg incl. various chains and swords as shown 2 clamping levers have already been welded (see the last two pictures) Manufacturer

ID3518 Bomag B200 on Iveco truck - Well drill / well drill year/Baujahr 1985 approx. 35,000 km Bomag B200 drilling rig (built in 1985), mounted on an Iveco truck (all-wheel drive), with a 100 mm rotary head and a 120 m cable, drilling depths of up to 245 m (250-300 mm diameter), 2 Caprari pumps (type MEC-100), with approximately 90 m of drill rods (114 mm diameter) Bomag B200 (built in 1985), on truck Iveco (all-wheel drive), rotary head 100 mm passage, rope head 120 m rope, drilled to 245 m depth - 250-300 mm diameter, 2 Caprari pumps (type MEC-100), with approx. 90 m drill pipe (114 mm diameter)

Inv. Num. : 3483 Type: HELICHECK Producer: WALTER MASCHINENBAU Created: 2004 Parameters: The machine is in good technical condition and energized Accessories: Hydraulic clamps SK50

.Capacity:10~60 pcs/min .Weight:10~300 g .Dimension:2,080x 970x 1,540 mm .Machine Weight:500 kg

tube diameter: 4-20 mm wall strength: 2 mm bending radius min.: 10 mm bending radius max.: 75 mm bending speed: 35 mm/min pull up length of tube: 2000 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 1,1 t dimensions: ca. 3100x1000x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 pcs used tool milling machine Make of lid Model FP 3 A Control Dialog 11 Technical data: Travel X,Y,Z 400,300,400 mm Clamping area 700 x 400 mm Quill stroke 80 mm Spindle drive 3kW Speed 3150 rpm Spindle holder SK 40 Machine dimensions L x W x H 2400/2200/1900 mm Machine weight approx. 2500 kg, Accessories: Grundig Dialog 11, fixed angle table, electronic handwheel, documentation Errors of technical data and prior sale excepted

Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - .ucymachines/ Contact us at - sales@ucymachines

1-needle flat quilting machine, upper and lower wheel transport

Universal machine (cutter, kneader, mixer, stirrer) in stainless steel design, primarily for the production of foodstuffs such as sausages, pasta products, sauces, etc., speed can be switched in two stages (680 / 1,430 rpm), drive power 3.3 / 4.5 kW.

1-needle double lockstitch quick sewer

Single Needle Double Lockstitch Flatbed Machine

This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

SCM F5L planer Working width 500mm 4kw main motor 4-knife shaft Traditional knives Main fence adjustable at an angle up to 45 Table top length 2600mm

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

Volume of work tank 200 l Usable volume 125 l Max. workpiece (diagonal) 170 mm Screening area 2190 cm² max. centrifugal force 49,000 N There are 2 lifts available!

Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder

Edge banding machine FORMAT 4 Tempora 60.06 Touchscreen swivelling control panel, Program memory, automatic pressure bridge adjustment, Feed by means of a transport chain, Pull-out workpiece support, Diamond joining milling cutters in synchronous and counter-rotation, glue basin below, Changing device for glue basins, Use of PUR adhesives possible, printing unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be swivelled pneumatically, Flush / radius milling unit, motorized positioning control of the milling unit, x-motion PLUS, Corner Copy Unit, Radius Drawing Blade, Radius scraper blade with motorized positioners, Wing scraper, Operation-controlled surface pulling blade, Spraying device release agent, Spraying device lubricant, Spraying device cleaning agents, -----Specifications----- Edge thickness roll stock: 0.4 - 3 mm, Workpiec ...

REF-2049 BIZERBA A 404 FB AUTOMATIC SLICER Automatic slicer manufactured by Bizerba Machine number: 10597824 Model: A 404 FB Year: 2009 30-55 strokes/min Slice thickness: 0.5-12 mm Cutting carriage: 400 mm Overall dimensions: 1,560 mm length, 1,000 mm width, 1,540 mm height

Volpato LASM edge sander Mechanical Oscillation Constant grinding speed 1.5kw motor Grinding height about 100mm Tape length 2640mm Height 130mm Extraction spigot fi 100mm

Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten

COMPOSITION: Surface planing machine: Table width: 350 mm 3-Knife Roller -------- Thickness planing machine: Machinable height: max. 240 mm Machinable width: max. 350 mm -------- Spindle milling machine: Spindle: Ø 35 mm -------- Circular saw: Length of the slide: 1100 mm Saw blade: Ø 300 mm -------- Mortising machine: Device

: 350 mm : 0650 mm : : 175 mm : 42 mm : 315 mm : 3500 U/min : D1-4 DIN 55029 : 63 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 2,5 mm bending angle max.: 135 ° stroke of upper beam: 25 mm weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2000x1100x1100 mm

Seam reaming and tape laying machine

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

Key data: 630 mm, 500 mm, 460 mm

Speed range: 31.5 - 3150 rpm Control Heidenhain TNC 155 Feed speed: 1 - 3000 mm/min. in rapid traverse X -Y: 6000 mm/min. in rapid traverse Z: 4000 mm/min.

for walking complete shafts, left and right

JKV Hermes JKV100 chocolate tempering machine Serial: 15070597 2015, Stainless, chocolate tempering moulding machine with vibratory table, adjustable temperature controls, mobile, 3Ph

core drilling diameter max.: 32 mm bore depth: 1150 mm swing diameter: mm weight of the machine ca.: 12 t total power requirement: kW dimensions of the machine ca.: m Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschi ...

Specifications: Manufacturer: Spinner Type: SB-CNC Year of Make: 1998 Control: Siemens 840D Travels: X 250 mm Z 285 mm Switch-on hours: 32,156 h Main spindle: Spindle speed: 5,000 rpm Spindle passage: 42 mm Tool holder: Tool holder: Multifix A on linear beam Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Collet chuck Interface for bar feeders The machine has a headstock elevation of 10 mm.

Hardly used blind eyelet hole and setting machine

hydraulic die press, built around 1990

for overhauling all types of shoes, tools incl.

table length: 3050 mm table width: 1530 mm burner heads: 1 stroke: 290 mm speed: 120 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

removes adhesive residues (sole edge)

Surface Grinding Machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of Make: 1998 Table length: 400 mm Table width: 200 mm Workpiece weight max. on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions LxWxH: 1,800 x 1,200 x 2,250 mm

Max. punching force: 50 kN Stroke actuation via footswitch