handtmann machine used for sale

Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Specifications: Working length: 2550 mm Max. bending power: 6.0 mm Bend : 4.0 mm Diameter upper roller: 176 mm Diameter lower roller: 176 mm Control panel with digital display Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 4000 x 1400 x 1500 mm Weight: approx. 3.6 tons Note: the machine was used exclusively for straightening coated aluminum sheets Rollers were wrapped in foil, which was removed without leaving any residue Condition of the rollers almost as good as new few operating hours

Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

For sale is a used bottle washer from the manufacturer PAC Swiss. The machine was used in a small bottling plant until the end and ran there without any problems. Specifications: Manufacturer: PAC Swiss Model: CB 14-0.5-R-6.5 LII Compact Year: 2003/2004 Capacity: 8,000 bph (min: 4,000 bph, max. 10,000 bph) Bottle type: 0.33 Ltr, 0.5 Ltr. - Bottles per row: 14 - Machine is frequency-controlled via a FU (conversion took place about 5 years ago - Machine is made entirely of stainless steel Please inquire for further data.

For sale is a bottle cleaning machine from the manufacturer MAG. The machine is fully functional and runs without any problems. The system has been regularly serviced and is ready for immediate use. Specifications: - Manufacturer: MAG – Schymanski - Type designation: E-SPLX 12-D - Year of construction: 1998 - Capacity: approx. 5,000 bph -Wreath: 0.50 l Euro bottle 0.50 l NRW bottle 0.50 l swing-top bottle 0.33 l gourmet bottle 0.33 l longneck bottle 0.33 l Vichy bottle - Material: complete V²A - Equipment: continuous operation – rotating spray shafts - Water softening system

Key data: 50 t, 270 mm, 850 mm

Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D controller. Automatically controlled side stop for convenient machining of your sheet metal parts from single part production to series production.

Manufacturer: Econo-Pak Type: FA-KT Year of Make: 2003 Condition: good Inclusive: - 1-head folding carton display WVE-DR-R Hotmelt (2 adhesive spots) - Angle capper - SIMATIC OP7 HMI - Nordson Hotmelt 3400V-2GAV4D/R Hot Melt Machine incl. Hand Glue Gun - Handheld control unit - Videojet 2-line for coding - 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm WITHOUT checkweigher Folding carton conveyors

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 ja_yes boring of olive 1=yes, 0=no: 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill h ...

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Key data: 40 kg, 1100 mm, 630 mm

Stock number: 3973 BALANCING MACHINE Manufacturer: SCHENCK, Type: R 2 N Machines NO.: ARD 0537, Year of manufacture: 1974 Specifications: Max. diameter 630 mm mm Max. tool weight 0.3 - 40 kg. Max. workpiece length 1100 mm Steuerung New Control VMI APT Balancing Spindle speed 450 - 1800 rpm Length: 1300 mm, Height: 1200 mm, Width: 500 mm, Weight: 800 kg

Year: 2018 - technically efficient, ready to work - after full service - motor: 2.2 kW - automatic hydro-pneumatic feed - pneumatic profile clamping - quick cutter change system - cooling-lubrication installation

Rego Herlitzius Type: Rotec 350 Circular knife Year of construction 2010 Cutting width: 3 – 25mm completely made of stainless steel for loaves max 3250mm length on casters tested and cleaned Stock level: 2 pieces

Diosna Spiral Mixer Type: SP 120 D 2 analogue timers 2 speeds Spiral stainless steel Stainless Steel Boiler Flour dust cover for 75kg flour or 120kg dough on castors with brakes 380V 50Hz Overhauled and repainted Height: 125cm Width: 85cm Depth: 130cm

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

Hammer C3-31 5-speed station wagon Year of construction 2024 With sliding table 2000mm Boom table 1100 with telescopic Length stop 1200mm swivel -45° 400V 3 kW (4 HP) 3 motors Degree Grid Index System Saw blade 250-315mm (without saw blade) Cutting height of 100mm Swivel: 90°-45° Parallel cutting width of 600mm Planing width of 310mm Planing fence can be swivelled 90° to 45° Dressing table length of 1400mm 3 Knife Automatic Planing Shaft Passage height from 4-225mm Thickness table length of 540mm Milling machine: 90° rigid Milling machine: 3000/6000/8000 and 10000 rpm Useful height 100mm Weight approx. 550 kg G&2992-o1852

Kemper Spiral Mixer Type: ST 75 A - overhauled and repainted – 2 automatic timer switching on and off – 2 speeds slow and fast – with 3 stainless steel boilers – Vats are locked by means of a hand crank – Stainless steel boiler and spiral – Bowl diameter inside 76cm Shell height inside 44cm – with flour dust cover – square head -Boiler capacity approx. 175 liters

Kemper Spiral Mixer Type: ST 75 A - overhauled and repainted – 2 automatic timer switching on and off – 2 speeds slow and fast – with 2 stainless steel boilers – Vats are locked by means of a hand crank – Stainless steel boiler and spiral – Bowl diameter inside 76cm Shell height inside 44cm – with flour dust cover – square head -Boiler capacity approx. 175 liters

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Fully assembled as a set included 4 Tool Holders WKH 210 4 Tool Holders WKH 211 4 Tool Holders WKH 212 4 Tool Holders WKH 213 2 Tool Holders WKH 214 2 Tool Holders WKH 215 3 tool inserts WEB 360 2 tool inserts WEB 367

Universal plan and boring head ISO - 50 recording

Stock number: 3975 PROCESSING Manufacturer: CHEVALIER, Type: 2040 VMC Machine NO.: MC925B02, Year of manufacture: 2003 Specifications: Table size 1200 x 450 mm Longitudinal movement (X) 1020 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Spindle Taper 40 ISO Stepless spindle speeds 8000 rpm Spindle motor 7.5 Kw Total power 15 KVA Tool changer 20 places Control Fanuc 0M Fabr. Operating hours spindle 4032 hours Length: 2350 mm, Height: 2650 mm, Width: 2750 mm, Weight: 5800 kg

Key data: 7 , 230 mm, 160 mm

SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)

Qty. 1 Second-hand slitting line for stainless steel – in storage Mfc.: SACMA Overhauled by CAMU Built: 1992 Dismantled: 2024 Coil weight: max. 27,000 kg at uncoiler, 10,000 kg at recoiler Coil internal diameter: 500 mm Speed: max. 140 m/min Double mandrel with centering side 2 cutting heads / shears with 180 mm diameter shafts New sheet metal tensioner Complete set of blades for stainless steel Ribbon turner on rail complete with scale Scrap baler

Wood Chipper, Wood shredder 18 KW Opening 600 x 800mm

turning diameter: 254 mm turning length: 600 mm control: Seicos total power requirement: 15 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 2,5 x 1,3 x 1,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WE OFFER AN VERY NICE CONDITION TRUMATIC 5000R PUNCHING MACHINE WITH COMPLETE AUTOMATION 24000 WORKING HOURS ONLY MACHINE WILL BE AWAILIBLE IMEDIATELY

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

Key data: 2000 mm, 1300 mm

available Berstorff Bias Cutter Angle 0-50 degrees with manual splice 90 degree with automatic splice Ce certified Description attached!

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked;  frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.

as good as new H & G

Various flanges

used fat baking appliance Treif Pegasus, overhauled, 50 Hz, 400 V, 0.9 kW, control system has been renewed, completely in stainless steel version, weight: 168 kg

Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Straight and cut machine Wafios R31 Diameter: 1-5mm – 7mm MY: 1993 – working condition Machine Number: 26106224 Extension length: 2m or 6m available Pay-Off: not available, we can offer separate for 3t. Mechanically refurbished Electrical checked Machine is in working condition

Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speeds 5,000 min-1 8-speed revolver Minimum quantity lubrication

CHANGE GEARS

connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used rotary bottle rinsing machine from Italian company Poggio, model FM24. New 2007.

Layer palletizer with intermediate layer inserter Capacity up to 600 carton/h Empty pallet magazine and pallet transport

Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: 2 castors hydraulically adjustable 3 rollers driven Bending moment: 48 cm/3 Roll diameter: 360 mm Main motor power: 7.5 KW Dimensions (length x width x height): approx. 2000 x 1300 x 1900 mm Weight: approx. 5.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request

Robofil 4030SI-TW Wire EDM Machine Year of manufacture 2001 Technical details on request

2x Diosna SP 200 AD - mit 5 kessel - mit hebekipper Alle Maschine nach gülüngel überholung. Moglich verkauf separate maschinen. Moglich austauch mit andere alte maschine in abrechnung. Meh info auf frage mail oder WhatsApp

ELB SURFACE GRINDER 460x2440mm CNC Dresser

Folding machine steel TD 52/4/4/2 Year of manufacture 2001 Art.Nr. PS6422 Rollers in the TD 52-2 plant would have to be replaced

Bread slicer/continuous machine/industrial version/creel machine Disc thickness 12mm possible product size width max 520 mm, height 140mm with lubrication with inlet belt Output approx. 30 loaves/min with material pusher