handtmann machine used for sale

1998 Folding machine max size 46 cm x 66 cm 4 pockets + A56 DC delivery + T460-3-X folding unit + T460 mobile knife Located: Germany Available: immediately

Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Proportionalventile Moog Proportional Moog Moog Proportional Valves Moog No. D662Z2768D Type F02HX3MGNEA2 Moog No. D061-7000D Type J15H08MEVAR Moog No. D662Z2768D Type F02HX8MGNEA2 Moog No. D061-7000D Moog No. D662Z4704 Type D02HXBM5NEA2-M Moog Nr. D061-9330 Type J15K0BM4HM1 Moog SN. 114995 No. D661Z736A Type D80HX3MGN0A0 Moog SN. 200539 No. D681Z4707B Type P80HXUR5VEA2-X Moog Nr. D633-7330 Type A02KO4F0VXY

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

max. wheel diameter: 120 mm gear width: 130 mm max. module: 2 no. of teeth to be hobbed: 6-325 Z min/max. spiral pitch: 20-5000 mm hobbing length: 130 mm weight of the machine ca.: 860 kg Universal hobbing machine MIKRON 102.05 MPS > External surface gearing Technical Data Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030/800/1520 mm Weight of the machine: 880 kg Colour of the machine: black The data for this ad was created with ModulMWS - the softwa ...

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

ALDURO Professional Knife WASU 50-230V for perfect results when sharpening your knives ! Backward Sanding Belt 50 x 1000 mm Peel-off felt disc Motor 0.6 kW, 230 V Speed 2850 rpm Belt speed 15 m/sec. Weight approx. 20.5 kg

workpiece diameter: 200/250 mm workpiece diameter: 200/250 mm threading length: 500 mm threading length: 500 mm thread pitch: 6 - 72 mm thread pitch: 6 - 72 mm grinding diameter - min.: 1 mm grinding diameter - min.: 1 mm centre distance: 800 mm centre distance: 800 mm max. module: 8 max. module: 8 spindle speeds: 0,19 - 32 U/mm spindle speeds: 0,19 - 32 U/mm pitch angle: 40 ° pitch angle: 40 ° relief of the tap: 0,015 - 4 mm relief of the tap: 0,015 - 4 mm grinding wheel diam. min/max.: 275 / 350 grinding wheel diam. min/max.: 275 / 350 total power requirement: 11 kW total power requirement: 11 kW weight of the machine ca.: 3,6 t weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

max. wheel diameter: 53 mm gear width: 25 mm max. module: 3 min. module: 0,1 total power requirement: 0,8 kW weight of the machine ca.: 0,21 t dimensions of the machine ca.: 600x460x1200 mm Resharpening machine MIKRON 121 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LIDKÖPNG CL 4B Centerless Grinding Machine Specifications Working range workpiece diameter: 1 - 150 mm Longest workpiece length in the grooving process 300 mm Abrasives: Largest outer diameter 508 mm Smallest outer diameter 365 mm Normal width of the abrasive media 254 mm Largest abrasive media width 305 mm Control body: Largest outer diameter 330 mm Smallest outer diameter 255 mm Normal width of the control body 254 mm Largest regulating body width 305 mm Normal speed (infinitely adjustable) 0-115 rpm Power: Main motor, maximum 37 KW Total requirement approx. 42 kW Weight approx. 7 t Space requirement: approx. 4 x 4.2 m The machine can be viewed by appointment in our factory in Krefeld. – Errors, changes and prior sale excepted –

Cutting width: 430 mm Cutting speed: 24 m/min Maximum throughput height: 90 mm Blade gap: 0 - 5 mm Apply length on infeed conveyor: 400 mm Infeed conveyor: 850 x 425 mm Discharge conveyor: 650 x 425 mm Overall dimension W x H x D (with/without discharge conveyor): 800 x 1190 x 1660 / 1210 mm Weight (with/without discharge conveyor): 225 / 210 kg Motor performance: 0.75 kW Electrical connection: 3 AC - 400 V - 50 Hz, 16 A Compressed air: not required

The SE60 shrink tank is the perfect addition to your Multivac vacuum machine for shrink packaging of traditional products Max Product sizes (W x D x H): 600 x 400 x 180 mm Max weight: 25 kg Machine dimensions (W x D x H): 720 x 680 x 1250 mm Working height: 820 mm Machine weight: 115 kg

LIDKÖPNG CL 4B Centerless Grinding Machine Specifications Working range workpiece diameter: 1 - 150 mm Longest workpiece length in the grooving process 300 mm Abrasives: Largest outer diameter 508 mm Smallest outer diameter 365 mm Normal width of the abrasive media 254 mm Largest abrasive media width 305 mm Control body: Largest outer diameter 330 mm Smallest outer diameter 255 mm Normal width of the control body 254 mm Largest regulating body width 305 mm Normal speed (infinitely adjustable) 0-115 rpm Power: Main motor, maximum 37 KW Total requirement approx. 42 kW Weight approx. 7 t Space requirement: approx. 4 x 4.2 m The machine can be viewed by appointment in our factory in Krefeld. – Errors, changes and prior sale excepted –

Manufacturer: Hobart Type: Washing machine Model: UPT 10 Capacity: 130 liters Universal dishwasher: 120 sec 240 sec 280 sec Height: 2417 mm Width: 945 mm Length: 1435 mm Voltage: 400V 50Hz 3N Power: 24.5 kW 39.4 A Sertifikat: IP X4 Main material: Stainlees Steel

Inv. Num. : 7802 Type: G300 Producer: INDEX Created: 2003 Parameters: Control system: Siemens Maximum turning length: 710 mm Maximum turning diameter: 270 mm Number of axles: 9 pieces

Manufacturer: Multivac Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg

Reference Num.: 3344 Brand: Laconda Type: 620 Available: directly Status: In production Location: Deutschland Equipment: - 7 Stationen - Heft-, Falz-, Schneideaggregat Theisen Bonitz

Manufacturer: Webomatic Type: CD 110 Machine dimension L x B x H: 1140 x 900 x 1050 mm Two cutting-sealing bars: 500 mm Chamber dimensions L x B x H: 650 x 500 x 220 mm Possibility to work with gas Vacuum pump: 100 m3/h Machine cycle: 15 - 40 sec Voltage: 380 V, 50 Hz Power 2.2 kW

Inv. Num. : 7790 Type: SL-4T Producer: MORI SEIKI Created: 1984 Parameters: Control system: FANUC 6T Maximum turning diameter over bed: 490 mm Maximum turning diameter over support: 320 mm Maximum spindle speed: 3000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 5500 kg Equipment: Conveyor

Inv. Num. : 7803 Type: EM 5 N II/L 2F Producer: ERNST Created: 2006 Parameters: Minimum length of the workpiece: 350 mm Maximum workpiece thickness: 70 mm Grinding width: 1380 mm Weight: 5100 kg

Spare parts for Battenfeld injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

Spare parts for Demag injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

Spare parts for Ferromatik injection molding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

For sale is a used long belt sander (The machine is in the preliminary stage, photo is of a similar machine) Manufacturer: Kuhlmeyer Model: ZBS Year of Make: 2003 Working Area: 3,000x800mm Band size: 9,000x100mm Included: Grinding table height-adjustable, 5-axis workpiece handling device, swap shelf and a supply of belts If you have any further questions, please call or write to us!

For inserting eyelets into pre-perforated material such as cardboard, cardboard, plastic, etc. -Automatic eyelet machine with maintenance-free brake motor drive -Automatic eyelet feed to the upper tool -The eyelet pressure can be adjusted according to the thickness of the material -The trigger is done with a foot pedal. Machine is in good condition

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von buerstlein Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen zirlguss Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwa ...

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

CNC Vertical Slot Milling Machine Year of Make: 1989 Workspace: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Spindle speed: 350 rpm – 4000 rpm Max. groove length: 1200 mm Max. groove width: 40 mm Clamping area: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant Setup Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, milling spindle new. Commissioning within a radius of 200 km included in the price.

There are two cooling units from the manufacturer Viessmann for sale. One of the systems is equipped with a Bitzer compressor for freezing down to -18 and the other has a scroll compressor also for freezing up to -18. Year of construction 2017

4 Head Paper Drill Machine

Flatpile Feeder, 4 Pockets, 1 Knive, Delivery

Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)

SODICK AG40L die-sinking EDM was built in 2011. This highly efficient machine is used for precision electrical discharge machining of workpieces with a maximum weight of 550 kg, enabling complex shapes to be achieved in even the hardest materials. Furthermore, workpieces machined in this way do not require other secondary processes to be undertaken, such as polishing. The installed CNC control has a useful perfect active control” function for simultaneous control of high-speed electrical discharges and axis movements, using 1 Gbit/s serial communication technology. The SODICK AG40L LN2 sinker EDM is offered with extensive equipment, consisting of, among others, an EROWA measuring probe, a 4-position linear tool changer and tooling. The total weight of the machine is 3900 kg. Technical specifications of the SODICK AG40L die-sinking EDM - feed in X/Y/Z axis: 400/300/270 mm - work ta ...

Height 2050 mm Width 1500 mm Length 3150 mm Type of breading breading dry breading machine

A used book sewing machine Aster Astronic Headop Feeder, Opening x 4, Infeed, Sewing Unit, Chain Delivery max Format: 46 x 32 cm

John Marshall Cutter

Autogil Cutter

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

Key data: 3100 mm, 2100 mm, 1000 mm

First commissioning: 2024 Control: OSAI Arbeitsbereich / Working Ranges X-axis: 3,100 mm Y-axis: 2,100 mm Z-axis: 1,000 mm Clamping table: 3,100 x 2,100 mm T-slot spacing: 250 mm Table load: 1,000 kg Milling unit: Spindle power:10 kW Spindle speed: Max. 24,000 min-1 Torque: 10.9 Nm Tool holder: HSK 63F Drives Linear Axes Feed speed X/Y axis: up to 40 m/min Z-axis feed speed: up to 25m/min Electrical connected loads: Voltage: 400 V Frequency: 50 Hz Fuse: 45 A Power requirement: 35 kVA Dimensions & Weights: Machine space requirements: approx. 4,800 x 5,000 x 4,300 mm Total weight: approx. 6.5 tons Colour: light grey Auxiliary: - 15-fold tool changer - Mobile control panel Machine Condition: New Availability: Immediate - subject to prior sale

Key data: 4000 mm, 2700 mm, 1250 mm

Year of manufacture: 2024 Steuer / Control: Heidenhain TCN640 inkl. HR520 Handrad - handwheel Arbeitsbereich / Working Ranges X-axis / X-axis: 4,000 mm Y-axis / Y-axis: 2,700 mm Z-axis / Z-axis. 1,250 mm Clamping table: aluminium table with T-slots at a distance of 250 mm Milling Unit / Milling Head Spindle power: 22 / 25 kW Spindle speed / rotation speed: Max. 24,000 min-1 Drehmoment / torque: 18 Nm Tool holder: HSK 63A Drives Linear Axes / Feed & Acceleration Feed speed X/Y-axis / max feedrate X/Y-axis. Up to 60/40 m/min Feed speed Z-axis / max feedrate Z-axis: Up to 35 m/min Electrical Connection Values / Electronic Consumption Spannung / voltage: 400 V Frequenz / frequency: 50 Hz Fuse / current power: 45 A Power requirement / power required: 25 kVA Dimensions & Weight & Dimensions: Required space: approx. 9,100 x 5,100 x 4,400 mm Total weight /  ...

Spare Part Package for AXIOM Luminos Fusion DL A YOM 2016 (Installation 2017) Spare parts package Generator Polydoros F80-2 Model (240) 10096925 ORIGIN DE (422) 276 _____________________________________ Tube data : OPTITOP 150/40/80HC-100 GTIN (01) 04056869009315 MODEL (240) 03345209 ORIGIN CN (422) 156 OPTITOP 15/40/80HC GTIN (01) 04056869009322 MODEL (240) 03345233 ORIGIN CN (422) 156 ______________________________________ Automatic collimator AFL01 II eL MODEL 10092618 Filtration. 1.0 mm AI / 70kV Please contact us for more detail and pictures ! worlswide shipment in best packing (woodenbox)

We have MIWE roll-in stoves for sale Price 2 000euro

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

Control Heidenhain ... Manual Plus 4110 Turning diameter ... 500mm Turning length ... 1500mm Spindle bore... 82mm Spindle speed ... 0-3000 rpm. Machine weight ... 2500kg L x W x H ... 3092 x 1370 x 1785mm Main engine power ... 17kW Max. workpiece weight ... 1000kg Circumferential diameter via support ... 350mm The machine is in good condition, possible to test under power.

Machine Type: NC Cycle Lathe Manufacturer: Emco Type: Emcomat EM300x2000 Year of Make: 2015 Condition: used / very good, few operating hours Serviced exclusively by Hedelius Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-EMC-0824 DESCRIPTION We offer you a used NC cycle lathe from the manufacturer Emco. Control Fagor Spindle speed max. 2500 Multifix Base Holder Tip width 2000 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE  ...

Key data: 6400 mm, 3 mm

with the following equipment: - Tin cassette - Hydraulic upper beam adjustment - Additional stand unit - Cheeks laser-hardened - Control with swivel arm - Motor stop system type 11 measuring range 20-1250mm - Stop finger 4x - Crowning device, manual - Control on the swivel arm Original price of the machine approx. 269,000 € Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.with the following equipment: - Tin cassette - Hydraulic upper beam adjustment - Additional stand unit - Cheeks laser-hardened - Control with swivel arm - Motor stop system type 11 measuring range 20-1250mm - Stop finger 4x - Crowning device, manual - Control on the swivel arm Original price of the machine approx. 269,000 € Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried  ...