handtmann machine used for sale

SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V

Gear grinder REISHAUER OZA with change gears.

Collamat NG50 YL Side labeller 2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

I - beam section - flat steel: 50 x 10 mm I-beam section - upend: 80 x 15 mm I-beam section - upend: 80 x 15 mm L-beam: 50 mm round material: 30,0 mm bar material dia. max.: 1 1/2 mm bar material - diameter: 30,0 mm weight: 185 kg range L-W-H: 670 x 530 x 1350 mm square material: 40 x 40 x 3 mm pipes: 60 x 2,0 mm total power requirement: 0,75 kW Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMPLETELY RENOVATED

For vegetable

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm current capacity: 380 kVA power capacity - grinding motor: 1,1 kW speeds of grinding spindle: 2 - 10.000 U/min total power requirement: 2,2 kW Mechanic: very good: Optical condition: very good: Condition: general reconditioning: The machine can be viewed under current.: operating key and instruction: Machine and accessories completely overhauled with CE marking 400 V, 50 Hz, with CEE plug and cable BASICMACHINE! built of year 1988 / overhauled in 2023 Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMV screw ...

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 10000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: Machine stand and carrier plate ground Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker >  ...

M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller

Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader

Grinding wheel dimensions: Ø300 x Ø50 x 76 mm, Height to be rectified: 500 mm, Surface to be rectified: 600 x 300 mm, Grinding head motor power: 5.5 HP, Weight approx.: 2.000 Kg

1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m

Krones Topmatic Heads: 51-8-8-130 right - left Capacity: 65,000 bph Ma-No. K071-438 Krones Topmatic Heads: 51-8-8-130 right - left Capacity: 65,000 BPH Ma-No. K071-438

we have two Polar loaders model TR150BL-3 1) Year 2001 with stand-alone gripper arm - BM5125 - comes from a P137X 2) Bj 2008 model - BM5126 - comes from a P155X cutting machine For the use of the devices, a rear table feeding of the high-speed cutter is a prerequisite

Krones Etima Solomatic Ma-No. K 018-H31

Single screw Extruder Theysohn 63mm

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

Stephan UM5 Universal Machine Machine is in good condition according to its age two speeds + pulse button 400V Removable boiler with knife insert The plastic wings in the lid and the knife insert have probably run into each other and scratched more often, but this does not affect the function Video about test run available

bore capacity in steel (diameter): 45 mm arm length: 325 / 1000 mm workpiece height max.: ca. 1000 mm spindle taper MT: 4 spindle turning speed range: 40 - 1700 U/min feeds: 0,125 - 1,25 mm/U distance spindle/base plate: 385 / 1400 mm quill stroke: 325 mm crossrail adjustment vertical: 700 mm : 360 ° boring head horiz. adjustable: 675 mm base plate surface area: 1300 x 800 mm total power requirement: 6,2 kW weight of the machine ca.: 3,8 t - autom. feed - right-/left spindle run Accessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stephan UM25 Universal Machine two speeds 1440/2900 rpm Knife insert (blades are to be sharpened) Stainless steel boiler with double jacket (electrically heated, but without function) Machine tiltable for removing the processed medium Machine in very good condition Video about test run available

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...

Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches Machine must be thoroughly cleaned before use. the frame and the engine cover should possibly get a new paint neat and smooth running Viedo available via test run

Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.

Weibert W7-32 5-fold combi woodworking machine New machine (immediately available) Planer width: 320mm Cutting length 1700mm Milling stop for tool max. D=180mm 3 motors 3kW Digital display milling machine Price: kpl. 5874,-€ excl. VAT 6990,-€ incl. VAT

grinding length: 900 mm grinding width: 510 mm workpiece height: 400 mm table surface area: 800 x 400 mm longitudinal feed of the table: max. 980 mm table speed -stepless-: 1 - 35 m/min grinding wheel size: 355 x 51 x 127 mm cross feed of the table: 460 mm cross feed: 1 - 40 mm/Hub vertical feed autom.: 0,005 - 0,04 mm/Hub rapid traverse vertical: 0,5 m/min grinding spindle speed: 1450 U/min grinding spindle drive: 5,6 kW table load capacity: max. 1000 kg total power requirement: 10 kW weight of the machine ca.: 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)

turning diameter: 200 mm turning length: 0,0 mm control: Siemens 810 D working spindle speed range: 4200 U/min travel -x axis: 210 mm travel -z axis: 610 mm spindle passage: 65 mm total power requirement: 0,0 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

C - elbow, type Ziehm Vision R in very good technical and optical condition.

Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Machine type: Kieserling seven-roll straightening machine Working range: Tubes from Ø 15 mm to Ø 75 mm Rods Ø 20 mm to Ø 65 mm Direction of passage: from right to left Speed: approx. 50 m/min Make Kieserling & Albrecht Type: WRUN 1A Location: Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany

Siemens X-ray tubes Type Megalix Cat 125 / 35 / 80 - 121 GW Siemens article number 05764606 Type Megalix Cat 125 / 15 / 40 / 80 - 121 GW Siemens article number 05764522

Machine type: Pipe drawing machine / line Working area: pipe diameter: 4-40mm, Wall thickness: 0.4-3 mm, Pipe length: 3,000-8,000 mm Speed: 60-80m/min Make: Bültmann Type: Pipe drawing machine type GKZ 080/01-10 Year of construction: 1995 Location: NRW Length 25,660 mm (entire system) Width 6,750 mm (entire system) Country of origin: Germany Delivery time short

Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics

Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches The machine is in very good condition, but must still be thoroughly cleaned before use. neat and smooth running Viedo available via test run

Capping machine for bottles. Capper incl. various format parts, exit turntable, infeed vibrators. The machine stays in line with a filling machine GRONINGER, DFV 6000.

We sell a tank wagon for a Sinmag SM 120 A. There are 3 pcs available

X/Y/Z axis travel (mm):750 x 500 x 400 U/V axis travel (mm):770 x 520 Work tank dimensions (W x D x H, mm):1264 x 973 Max. workpiece weight (kg):1500 Distance from floor to table top (mm):1000 Machine dimensions (W x D x H, mm):2100 x 2860 x 2390 Machine weight (kg):5600

Screwdriver Alcoa Year of construction: 1991 Type: DC 2090ZS Control: Siemens S5 Capacity: up to 50,000 bhp

Kemper Lifting Kneader F125 ASL extendable with 2 stainless steel shells 2 speeds 2 timers Stainless steel lifting arm Year of construction: 2001 Flour dust cover overhauled and repainted

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

Diosna Spiral Mixer Type: SP 120 D 2 touch timers 2 speeds Spiral stainless steel Stainless steel boiler Flour dust cover for 75kg flour or 120kg dough on castors with brakes 380V 50Hz Overhauled and repainted Height: 125cm Width: 85cm Depth: 130cm

x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm turning speed range: 20 - 6.300 U/min feed speeds: 1 - 5.000 mm/min rapid traverse: 5 m/min tool taper: SK 40 power capacity: 6,3 / 10 kW control: Sinumeric 810 D tool change unit: pneumatisch manuell total power requirement: kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ca. 2 x 2 m 11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interface Operating mode 4 (extended manual intervention) Accessories: coolant device, electronic handwheel Machine is workshop tested and with electrical Acceptance report The data for this ad was create ...

Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric

Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR