134,098 used machines on RESALE, but how to find them? Machine Search
used
GeneralHorizontal machining center; Control: Siemens S840Dsl with CELOS CharacteristicsSpeed max.-15000 rpmDimensions (L x W x H)2,68 x 4,19 x 2,54 mMax. tool length450 mmSpindle taperHSK-A 63 Tool Magazine with60 PositionsRapid feed X / Y / Z60/60/60 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMax. work piece height900 mmMax. work piece diameter630 mmMaximum load (table centre)400 KgSwivelling range360x1 degreeTable size400x400 mmDrive power (40% DC)46 kWDrive power (100% DC)30 kWWeight approx.8500 KgHigh-torque spindle 46 /30 kW, 15,000 min-1High-torque spindle 46 /30 kW, 15,000 min-1 (SIEMENS)Preparation for Center Through-spindle coolant systemCenter Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point ...
x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t
Shaft grinding machine with belt grinding attachment Specifications: - Flexible shaft 1500 mm - 5 speeds - Belt grinding attachment - Drive 380 V - mobile underframe - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg
New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for small batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days
Specifications: - Flexible shaft 1500 mm - infinitely variable speeds 1000 to 12000 rpm - Drive 380 V - mobile underframe - Space requirement approx. W 750 x H 1400 x D 500 mm - Weight approx. 50 kg
x-travel: 970 mm y-travel: 420 mm z-travel: 430 mm Control: Heidenhain TNC 135 number of speeds: 12 speeds: 31,5-1400 U/min feed range lengthways and crosswise: 8-2000 mm/min feed range - vertical: 4-1000 mm/min rapid traverse longitudinal and cross: 4 m/min rapid traverse Z-axis: 2 m/min weight of the machine ca.: ca. 3,8 t dimensions: ca. 3050x2350x2320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal Käde packaging machine
screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN
Inv. Num. : 6203 Type: E160A Producer: Hyundai Generated: 2018 Parameters: Control system: FANUC i-series Operating hours: 5042 h Switch-on hours: 2531 h Maximum turning length: 300 mm turning diameter: 280 mm Maximum length travel in the X-axis: 165 mm Maximum feed in the Z-axis: 330 mm Maximum main spindle power: 11 kW Maximum spindle speed: 6000 1/min Equipment: Bar feeder Autobar (diameter 65 mm/length 1 meter/year 2018) C-axis Conveyor Tool holder Chuck CNC tailstock Tools
swing diameter:80 mm workpiece length:450 mm weight of the machine ca.:3500 kg
swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers
Shape milling machine Brandt type FP 10 Specifications: • Year of construction: 1989 • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 - depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm. • Electrical: 220 V - 1 Ph. - 50 Hz • Power supply (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Swabing unit: for processing thick PVC edges • Weight (kg): approx. 120
Refer to code 1049 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...
Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg
current capacity: max. 13 KW throat: 120 mm contact pressure capacity: max. 120 kp voltage: 400 V open-circuit voltage: 2,5 V welding power: max. 2 x 2mm Blech fuse protection -thermal: 16 A total power requirement: 13 kW weight of the machine ca.: 12 kg dimensions of the machine ca.: 0,5 x 0,1 x 0,2. m Manual spot welding machine with 2 sets of welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter:40-200 mm total power requirement:31,3 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,8 x 2,2 x 1,8 m
max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm
Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.
grinding length:400 mm workpiece weight:250 kg weight of the machine ca.:4,1 t swing diameter:250 mm grinding spindle speed:2387, 2938 U/min
Dressing diameter: Planing width: min. module: for Reishauer RZ150
Automatic labeling machine in balcony design for the application of self-adhesive vignettes and tamper-evident labels (airplane closure as well as from above). Appendix incl.: - PLC SIEMENS, type S7-300. - HMI PC SIEMENS IPC 677 - 2x REAJET printing system, type HRpro with camera control system - Preparation for vision system LAETUS WT Commandor - Conveyor belt width: 250 mm - Various control systems for label presence with ejection etc. Output: up to 180 pcs./min. Format range: Carton size (A, B, H) A) from 25 to 185 mm B) from 15 to 85 mm H) from 68 to 250 mm A+W
6000 x 2000mm 6000w with transverse conveyor
Sling and agitator Rego SM3 A used Rego SM3 stop and stirring machine is currently for sale and immediately available in our warehouse. Stop and mixer Rego SM3 -revised and repainted -for max. 30 liters -with automatic run via timer -manual run -stirring and beating
turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024
grinding diameter:300 mm grinding length:540 mm centre height:175 mm total power requirement:20 kVA centre distance:1000 mm
grinding diameter:50 mm grinding length:100 mm centre height:100 mm centre distance:200 mm
Dowel hole drilling machine Fabr. Scheer Model: DB5 Drilling gear with 21 spindles Swivel Spindle distance 32mm Archive image! Original pictures will follow soon or on request
0: 18 St. Depth: 800 mm Length: 2300 mm Height: 1500 mm weight: 90 kg Profile trolley RU-PW1SH One-sided for wooden profiles ------------------------------- Vertical storage and transport of cut wooden profiles Furnishing: -Easy loading and unloading - Sorting combs covered with PVC tube, -Set-up area as a plan board or bar grid floor -Available on one and two sides -Compartment bracket and clamping plate available separately -Mobile on 4 polyamide swivel castors, 2 of which have brakes Technical specifications : RU-PW-1SH 18/100 Length 2,300mm Width 800mm Plant part height 1500 mm subjects 18 Compartment width 100 mm (adjustable) Compartment depth 400 mm Weight 90kg Installation surface made of planboard. With 4 plastic Swivel castors, Ø 150 mm, 2 of which have brakes. ------------------------------- Price ex works plus shipping and packaging: on request ------------------------------- ...
dimensions of the machine ca.:3,5 x 2,0 x 2,5 m
bore capacity in steel (diameter):1-13 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm
bore stroke:170 mm total power requirement:3,5 kW dimensions of the machine ca.:0,75 x 1,10 m bore spindle turning speed range:30-3000 U/min bore range:diameter:4-60 mm
ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...
KHS-KISTERS Innopack SP 060 V panel: Simatic Touch Panel; Control: S7; power supply: 230/400 V, 50 Hz; six-track entrance; shrinking tunnel; oil-based central lubrication of the tunnel and packer; ionization. Automatic felling folli. Support for both transparent and printed film. Automatic film bonding. Possibility of packing in one or two lanes depending on the size of the multi-pack format. Supported packaging: glass/PET/can. Operator panel menu: DE/PL/ENG. In our offer we have both right and left machines. Possibility of individual adjustment of formats to customer needs.
Stop and mixer Rego SM2 used Rego SM2 stop and mixer reworked and repainted is currently for sale and immediately available in stock. - for max. 20 litres - with automatic run via timer - manual run - Stirring and beating - repainted - many parts renewed
max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN
max. wheel diameter:300 mm gear width:110 mm max. module:6 weight of the machine ca.:10,5 t
max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt
Offer 22523 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool
maximum number of results exceeded
please refine your search
