137,144 used machines on RESALE, but how to find them? Machine Search
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg
Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 18 mm -Drain: Ø 60 mm -Number: 26 available -Price: per piece -Dimensions: 540/440/H300 mm -Weight: 4.3 kg
Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Elan, two-hand control panel with counter -Type: SEP 03.0.2.1.22 -Connector: 10-pin -Dimensions: 460/440/H140 mm -Weight: 6.4 kg
Complete powerful planing mill with WACO 6 shaft planing machine, double cut-off band saw Möhringer, complete mechanization, moisture measurement, control, etc. etc. Output approx. 2,500 m3/month and shift. Depending on the dimension Facility consists of: Tilt destacking, single piece allocation, Brookhuis moisture measurement, Braun Canali double band saw, small coil bundling with Böhl small coil formation and feeding to stacking machine, 2 x stacking machines with battening, complete packaging line with film dispenser, package press with lower squared timber insertion. The complete Siemens control system, the entire steel substructure, all cabling, pipes, etc. Very well maintained plant for the production of slats, spring groove, 2 by dimension lumber etc.
Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
100,000 litre, Stock number: T4044, Litre: 100000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Standing: For foundation, Top: Conical, Bottom: Flat sloping, Tank cover: In the side, CIP: Yes, TJ SaniMega, Working temperature: 0 - +50° C, Density: 1.0, Working pressure: None, Inner diameter: Ø 3500 mm, Total height: H 11200 mm, Other: Airing cap Ø 500 mm, Condition: The tanks have never been used
Weber Assembly Table Joining Station Solid industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely solid basic mechanical design and is ideal for production plants, workshops or as the perfect base for a modernization project Technical data (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly Table Machine No.: BA 659 00 Year of manufacture: 08 / 2000 Electrical connected load: 380 V (CEE plug available) Connected load pneumatics: 6 bar "Everything from a single source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!
Gantry system / 3-axis handling system / handling robot 3-axis handling system from the field of plastic films, built in 2014. The machine can no longer be used for this purpose, as the specific units are no longer available. The handling system is very well suited as a base carrier for new applications in automation. Special-purpose machine manufacturers can use the handling system as a cost-effective base carrier for the construction of an automatic processing machine and thus secure cost advantages in the competition. This can be the mechanical processing of soft materials or stirring technology, as a pneumatic motor with a chuck is now attached. Or a handling device for recycling batteries. All linear actuators with drivers are high-quality Festo components. CMXR multi-axis controllers. Dimensions: WxDxH: 2.5 x 2.0 x 2.3 m Weight approx. 1 ton Equipment: Base ...
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: unkt. workpiece weight: unbkt kg throat: unbkt. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HAND-PALLET-TRUCK Equipment / Additional information: -Lift loads -Working at the ideal height -QuickLift -With hand-hydraulic lifting drive -Height approx. 80 cm
Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz
Work piece handling system manufactured in 2018. This TOP Automazioni Top Loader ETL 10-75 has a total weight of 2500 kg. If you are looking to get high-quality handling capabilities, consider the TOP Automazioni Top Loader ETL 10-75 machine we have for sale. Contact us for further details.
used
handle applicator Smipack type: HA80SX Maximum output up to: 80 ppm Working board height: 650-810 mm
OASI robotic material handling system. S (Open Automation Systems Integrator Server) for automatic loading and unloading of intravenous drip bags and trays. This system is designed to transport filled intravenous drip bags from the cleanroom, load and position drip bags into trays using a pick and place robot, stack trays on a pallet, as well as move pallets with empty trays to and from cells. The system consists of connecting conveyors, a 'clean' station with a delta robot, a robotic loading station (delta and 4-axis robot), an unloading station (2x 4-axis robot). The line includes the following works: -3 x FANUC M-410iC/315 robot serial numbers: R24500486, R24500487, R24500488 year of manufacture 2024 -delta robot FANUC M-3iA/6S, serial number R244001FB, year of manufacture 2024 -delta robot FANUC M-2iA/3SL, serial number R2430075E, year of manufacture 2024 Indivi ...
number of controlled axis: unbkt. workpiece weight: unbkt. kg throat: unbkt. mm total power requirement: unbkt. kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: Unbkt kg throat: bis 8000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Keyence IM-Series Automated Image Dimension Measurement System with Renishaw Fixturing & Workstation Manufacturer: Keyence Series: IM-Series Equipment type: Automated Optical / Image Dimension Measurement System Controller: Keyence IM-6000 Series Location: 91701 Trnava Professional automated optical dimensional measurement system designed for fast, non-contact inspection and measurement of precision components. The system uses image-based measurement technology to measure multiple dimensional characteristics of components positioned on the measurement stage. Suitable for quality control, production inspection, metrology and precision manufacturing applications. Included equipment: Keyence IM-Series optical measurement unit Large measurement stage Integrated Keyence display Keyence IM-6000 Series controller/computer 2 Keyence handheld devices with docking statio ...
Max. speed: 20km/h, weight: ca. 19.4t, on-site inspection is possible.
Equipped with weighing device (without charger) Auction-ID: A1-50244-67
Available in stock 1 x Used Rehobot Hydraulics 1000 bar Two stage Hand Pump Type PHS-374.36. The equipment is used but in good working conditions.
Description 0043-664-2803850 Specifications: Cutting depth 85 - 165 mm Cutting depth at 45° 60-116.5 mm Cutting depth at 60° 42-82.5 mm Swivel range 0 - 60° Idle speed 1500-1800 1/min Rated power 2,800 W Weight 15.3 kg Suction connection 58mm Description: The carpentry hand saw with exceptional weight/performance ratio! This is only possible through the use of state-of-the-art magnesium die-cast alloys. Swivelling up to 60°, this makes the hand-held circular saws a universal partner. The easy-to-read scale on the rotary wheel of the cutting depth adjustment makes the work easier and saves annoying remeasurement. For optimal handling and better control, the carpentry circular saw is equipped with soft start, constant speed under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable suction nozzle make your work m ...
Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.
Unused Auction-ID: A1-40407-100
Hand sealing machine for sample packaging blister Sealing jaws can be triggered with pneumatic foot switch. Temperature and sealing pressure adjustable. Sealing of one side at a time, max. 150mm width, sealing pattern see picture.
DALEX two-hand safety relay ZS 2-1 --- 24VDC for legacy Dalex PMS systems
maximum number of results exceeded
please refine your search
500 € 
