hand lathe used for sale

pressure: 25 t stroke: 250 mm table-size: 400 x 500 mm surface of ram: 200 x 500 mm weight of the machine ca.: 0,9 t dayligth: 400 mm distance between columns: 500 mm - Handspindelpresse, gebraucht Balancier, used Typ/ type: PSHZ 25/I Preßkraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgröße/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Gewicht/ weight: 0,9t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: SF181, Hand sieve,, mesh size 0,7/1 mm., Ø 560 mm.

Automation incl. pallets for pick-up with Erowa 4-fold zero-point clamping system

20.000 litre, Stock number: T3918, Litre: 20.000 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Double jacket: No, Insulated: No, Tank cover: In the top Ø 500 mm., Agitator: No, Inner diameter: Ø 2350 mm., Total height: 5575 mm., Plate type: Stained type B2, Interior finish: All weldings are sanded grain 60, Outer finish: All weldings are sandblasted, Working temperature: 0- +50 °C, Density: 1,0, Working pressure tank: Unpressurized, Manufacturer: Handing

25.000 litre, Stock number: T3837, Tank, stainless acid proof steel AISI 316,, closed top, standing on 4 legs., Conical top 15°., Conical bottom 20°., Tank cover on top, Ø 500 mm., 1 pc. Ø 2½ connection piece in bottom centre., 1 pc. Ø 4 connection piece on top., 1 pc. Ø 1½ connection piece in top centre., Tank dimension Ø 2600 mm x shroud 4500 mm., The tank is made in stained plate type B2., All weldings on the inside are grinded grain 60., All weldings on the outside are sandblasted., Density: 1.0., Working temperature: 0-+50°C., Working pressure: None, Scope of application: A, Litre: 25.000, Material: Stainless acid proof steel AISI 316

21.500 litre, Stock number: T3621, Tank, stainless acid proof steel,, closed, standing on 4 legs., Conical top 15°., Conical bottom 20°., Tank cover in the top Ø 500 mm., 3 pc. connection pieces, All welding on the inside are grinded grain 60., All welding on the outside are sandblasted, Tank dimension Ø 2500 mm x shroud 4180 mm., The tank is made in stained plate type B2., Density: 1.0., Working temperature: 0-+50°C., Working pressure: unpressurized., Scope of application: A, Litre: 21.500, Material: Stainless acid proof steel AISI 316

CONTROLS   CNC controls YASKAWA DX200 4-axis palletizing robot as good as new, never in use Payload 500 kg Up to 1200 cycles/hour Vertical reach 3024 mm Horizontal reach 3159 mm Weight 2300 kg 2 units available

Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

Measuring machine with hand-held measuring arm STIEFELMAYERhigh-precision measuring and marking plate cast steel-grey cast iron strongly ribbedMasch. No. 22890285 year of construction 1985Length 2500 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1970 mm, Y = 815 mm, Z = 840 mm- with 3-axis digital display Grundig MZ 1030- 5 pieces height-adjustable feetSpace requirement L x W x H 2500 x 1500 x 2500 mmWeight 3000 kgvery good surface;

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145

Measuring machine with hand-held measuring arm STIEFELMAYERMess and marking plates cast steel-grey cast iron strongly ribbedHigh-precision measuring plate with good surfaceYear of construction 1985Length 2000 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm- with 3-axis digital display Grundig MZ 1030- machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces of height-adjustable feetSpace required

Hand lever press partly with pneumatic cylinder Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours

Hot stamping hand lever press, embossing foils, silver gloss and gold luster among others are included Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours

HAND CREASING & PERFORATING Equipment / further information: new tool for perforating

gt; cap: 5 ton gt; max width: 1100 mm gt; manual clamping gt; non-driven unit

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Robot cell | HALTER - LoadAssistent S-230-35 equipped with a FANUC Robot M-20i and a HALTER 3-finger gripper The Robot cell is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Load Assistent S-230-35 | LoadAssistentS-230-35 | Load-Assistent S-230-35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used bread roll line with proofer EBERHARDT, type: Primo-Star / Vario-Star -In bakery condition- For Kaiserbrötchen, Kärtner Brötchen and Sternbrötchen - Primo-Star head machine - Proofer Vario-Star - Workflow from left to right - Weight range: 20 - 85g - Incl. spare engine - Double fermentation carriers - with flour Visits and test runs are possible by arrangement.

Double Filling Hand Former Casting Line, 2 unit May contact me at: sywee@topglove.com.my

Inv. Num. : 8755 Type: M120Z Producer: Epsilon Generated: Parameters: The hydraulic arm is ready after it has been completely driven off.

Manufacturer: NIDEC SANKYO Model: SR8220-019 Year of Manufacture: 2008 Type of Machine: 200mm THIN WAFER Loader NSX Condition Good Weight 1,433 lb (650 kg) Find more here - / Contact us at -

NEW, 2,40 m working width, 2.0 m³ capacity, 658 kg weight, suitable for Bobcat telescopic handler attachment

Manufacturer: Heina Model: TT2-1000/1000 Year of Manufacture : 2018 Condition : Very Good Find more here - / Contact us at -

We have two grain unloaders capable of discharging vessels with a draft of up to 17 meters (approximately 100,000 DWT). One unit is a mechanical unloader and the other is a pneumatic unloader. Details are as follows: Manufacturer: Bühler Year of Manufacture: 1983-1985 Mechanical Chain Transporter HM1-T1 + HM2-T1 Transporter type: HL-SKT RSH-450 Feed capacity: 1000 t/hour grain Total length: 28.1 m Chain speed: 2.28 m/s Drive shaft speed: 37.7 rpm Torque on drive shaft: 40,200 Nm Drive power at shaft: 164 kW Drive system: two hydro motors on each drive shaft Hydraulic motor type: MK 43-09200-CO-RN Absorption capacity: 9.2 liters per rotation Specific torque: 147 Nm/bar Nominal torque: 20,100 Nm Nominal pressure: 156 bar Chain Transporter in Boom HM1-T2 + HM2-T2 Transporter type: BKT 1210/290 142V 002 TWIN Feed capacity: 1000 t/hour grain Total length: 33.2 m Chain sp ...

Size: 260 x 380 mm Equipments: Hot foil system: original HEIDELBERG Largest sheet 260 x 380 mm Smallest sheet 40 x 70 mm Max. Mold size 260 x350 mm Punching force 40 tons Capacity 5500 Bg./h 380 V 1,25 KW Own weight 1100 kg 2 Locking frame

Rooftop Air Conditioner CLIMAVENETA WSM2-T 0354 106.2 kW Cooling capacity: 106.2 kW / 30.2 tons Year of manufacture: 2022 Options: Air filter, Wika air flow sensor, 2 pcs. Belimo damper actuators. Refrigerant circuit: 2 pcs. Heat exchanger: Copper / Aluminum Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland scroll ZP104KCE-TFD-477 (scroll) Number of fans: 2 pcs. + 4 pcs. (centrifugal, EC-fans) Type of refrigerant: R410A Dimensions: 6.1 х 2.25 х 2.41 m Weight: 1780 kg Working hours: 0/0/0/0 h. Condition: Outlet, New

pressure: ca. 5 t dayligth: 110 mm throat: 40 mm weight of the machine ca.: ca. 50 kg dimensions of the machine ca.: 1,2 x 0,5 x 1,3 m Function: ready for operation: 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This FMB Turbo 8-80 was manufactured in 2012. It is a work piece handling system connected to Okuma, offering efficient handling capabilities. Consider the opportunity to buy this FMB Turbo 8-80 work piece handling system. Contact us for more information.

DELTA Hand Winch Type HW 0.5t. Bj 2022, used, ready for use

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Condition: good, demo machine: Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demonstration device Hand punch incl. 4-piece haulm divider and haulm plate DIMENSIONS Length 840 mm Width 585 mm Height 1120 mm Weight 42 kg

Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 3,6kW Two lanes Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available

Sack truck sheet metal red handles

This work piece handling system was manufactured in 1999. Consider the opportunity to buy this ROMMEL BM600S work piece handling system. It features a conveyor belt and BE unloader, making it suitable for efficient material handling tasks. Reach out for further details regarding this machine.

Pallet handling system manufactured in 2023. This NEUMAIER AGV Factory Shuttle FS404 features a payload capacity of 400 kg and dimensions of 830 × 1350 mm. It is equipped with a 2-way drive and steering system, ensuring efficient navigation. The safety features include a PSA laser scanner and a safety bumper for reverse travel. If you are looking to get high-quality pallet handling capabilities, consider the NEUMAIER AGV Factory Shuttle FS404 machine we have for sale. Contact us for further details.

Pallet handling system manufactured in 1992. This FL SYSTEME F05.10 FLG features 42 rows with 4 levels, each accommodating 2 pallet spaces. The frame height is approximately 7m, with a total length of about 90m. The crane is essentially included free of charge, and the price includes dismantling. If you are looking to get high-quality pallet handling capabilities, consider the FL SYSTEME F05.10 FLG machine we have for sale. Contact us for further details.

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

Electric pallet truck, with built-in scale, battery-powered digital electronic panel, maximum weighing capacity 2000 kg, never used 0 hours Overall dimensions: 1300 x 700 x 800 mm Weight: 150 kg Auction-ID: A7-44803-141

Offer 26072 Technical data : - Rope balancer with load capacity of approx. 60 kg - Articulated arm with projection approx. 3.6 m - Swivel range approx. 375 ° - Hackenweg approx. 2.0 m - Total height approx. 3.2 mm - Pneumatic connection 6 bar - Net weight approx. 300 kg

SALES MANDATE Brunetti professional hand blender model MP2816B (gastronomic mini-blender). Power of 280 W, power supply 220V / 50Hz and speed of up to 20,000 rpm. 160 mm cutter arm. Equipment designed to mix, crush, emulsify and process soups, sauces, mayonnaises and liquid preparations. Industrial professional grade construction, easy cleaning and maintenance. Approximate dimensions: 290 x 110 x 570 mm. Weight: 2.5 kg. Auction-ID: A7-44748-151

Offer 26075 Technical data : - Rope balancer with load capacity of approx. 60 kg - Articulated arm with projection approx. 3.6 m - Swivel range approx. 375 ° - Hackenweg approx. 2.0 m - Total height approx. 3.2 mm - Pneumatic connection 6 bar - Net weight approx. 300 kg

Electric pallet truck, with built-in scale, battery-powered digital electronic panel, maximum weighing capacity 2000 kg, never used 0 hours Overall dimensions: 1300 x 700 x 800 mm Weight: 150 kg Auction-ID: A7-44803-79

SALES MANDATE Brunetti professional hand blender model MP2816B (gastronomic mini-blender). Power of 280 W, power supply 220V / 50Hz and speed of up to 20,000 rpm. 160 mm cutter arm. Equipment designed to mix, crush, emulsify and process soups, sauces, mayonnaises and liquid preparations. Industrial professional grade construction, easy cleaning and maintenance. Approximate dimensions: 290 x 110 x 570 mm. Weight: 2.5 kg. Auction-ID: A7-44748-147

Electric pallet truck, with built-in scale, battery-powered digital electronic panel, maximum weighing capacity 2000 kg, never used 0 hours Overall dimensions: 1300 x 700 x 800 mm Weight: 150 kg Auction-ID: A7-44803-83

SALES MANDATE Brunetti professional hand blender model MP8550B (gastronomic mini-blender). Power of 850 W. 500 mm cutter arm. Equipment designed for mixing, crushing, emulsifying and processing food in professional environments. Robust construction for intensive use in the kitchen. Dimensions and weight not specified. Auction-ID: A7-44748-171