129,386 used machines on RESALE, but how to find them? Machine Search
Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.
Skjold hammer mill with 7.5 kw, Sieve ø 515 x 70 mm Perforation ø 2 mm 12 bats, Inlet ø 80 mm, outlet ø100/90 Operation with extraction required We offer overhaul and reconditioning in our specialist workshop according to customer requirements!
Specifications: - Total width approx. 800 mm - Work surface length / web length approx. 120 mm - Working surface depth / web depth approx. 120 mm - Total depth approx. 100 mm - Round horn approx. 340 mm - Square horn approx. 340 mm - Anvil height with substructure approx. 820 mm - Anvil weight approx. 65 kg - Substructure approx. W 420 x D 420 x H 300 mm - Substructure mounting hole 85 mm - Weight of substructure approx. 35 kg
for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available
Hammer drill, drilling machine HILTI TE 54 ( TE54 ) drilling capacity steel: 13 mm drilling capacity concrete: 52 mm 230 / 480 rpm 900 W 230 V with case Dimensions: 600 x 400 x 140 mm
Hydraulic Breaker Rammer 3288 E 3 times available Hydraulic Breaker Manufacturer: Rammer Type: 3288 E Year of Make: 2020 Strike hours: -Hammer 1- 935h -Hammer 2- 722h -Hammer 3- 660h Carrier class: 26.0 - 42.0 to. Weight : approx. 2400 kg Adapter plate: Verachtert CW 45 S Other: not overhauled, sold with chisel and hydraulic hoses
Key data: 150 kg, 480 mm, 375 mm
Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg
Inv. Num. : 8406 Type: M1340 Producer:- Generated: Parameters: Compressive force: 1000 kg Stroke: 1100 mm Maximum stroke rate: 71 1/min Anvil weight: 15000 kg Machine weight: 27000 kg Pneumatic hammer is after GO.
Inv. Num. : 8407 Type: MB 4134 Producer:- Generated: Parameters: Stroke: 625 mm Maximum stroke rate: 150 1/min Ram weight: 250 kg Anvil weight: 2800 kg Machine length: 2615 mm Machine width: 1180 mm Machine weight: 7850 kg
CW05 headstock, flat-face female couplings Auction-ID: A1-45424-52
ram hammer weight: 26 kg ram hammer stroke: 200 mm type: KO : 596 no. of strokes: 220 Hub/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CW05 quick coupler, suitable 0.8-1.5T excavator Auction-ID: A1-45424-54
pressure: . t stroke: . mm total power requirement: . kW weight of the machine ca.: 3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
10.000 litre, Stock number: T3067, Tank, stainless steel,, closed top, standing on legs., Dished top and bottom., Bolted tank cover in the side., Ø 1900 mm., Litre: 10.000, Material: Stainless steel AISI 304
6.800 litre, Stock number: T3984, Litre: 6.800, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: 4 pcs. legs, End bottoms: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: 650 x 850 mm., Agitator: Yes, Agitator type: Paddle agitator, Working temperature: 0/150° C, Working pressure double jacket: 3,5 bar, Inner diameter: Ø 1900 mm., Total height: 2400 mm., Manufacturer: Hammerum Tullebølle A/S, Year: 2000
750 litre, Stock number: T3987, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Item: Transportation tank, Amount in stock: 9 pcs., Standing: On 4 pcs. legs with truck grip., Top: Conical, Bottom: Conical, Tank cover: On the top, Ø 400 mm., Inner diameter: Ø 940 mm., Total height: 1680 mm., Manufacturer: Hammerum Tullebølle A/S, Model/type: FI 750
700 litre, Stock number: T2962, Litre: 700, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Flange for agitator at the top, Working pressure: 3 ATO, Inner diameter: Ø 790 mm., Outer diameter: D 950 mm., Total height: 2215 mm., Manufacturer: Chr. L. Hammerum & Sønner I/S, Year: 1980
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
Replacement tooth small suitable for Hammer RH25 Demolition Pulverizer
Offer 25443 Specifications: - Bear weight 40 kg - Impact regulation - Lifting height infinitely adjustable 200 mm - Impact rate approx. 220 1/min - Projection 280 mm - Anvil - height approx. 560 mm - Anvil - Weight 250 kg - Drive 380 V / 4 kW - Space requirement approx. W 850 x H 1100 x D 1350 mm - Weight approx. 850 kg
Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.
Capacity 7.25T /16000lbs Stroke 1727 mm weight 270t
Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t
Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t
Lot consisting of hydraulic hammer Ø25 mm attachment for JPC excavators (except HT25) + 200 mm bucket + 800 mm bucket, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44802-330
Lot consisting of hydraulic hammer for jpc excavators (except HT25) + 200 mm bucket + 800 mm bucket Ø25 mm hitch, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44802-406
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44802-389
Mini-excavator demolition hammer, ideal for JPC HT12-HT15-PC10 models for excavators from 700 to 1800 kg, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-44802-115
Lot consisting of hydraulic hammer for jpc excavators (except HT25) + 200 mm bucket + 800 mm bucket Ø25 mm hitch, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44803-406
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44803-389
Mini-excavator demolition hammer, ideal for JPC HT12-HT15-PC10 models for excavators from 700 to 1800 kg, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-44803-45
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44803-398
Mini-excavator demolition hammer, ideal for JPC HT12-HT15-PC10 models, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-44803-107
Silenced demolition hammer for mini-excavators weighing from 1.5 to 4.5 tons, never used Overall dimensions: 1000 x 800 x 400 mm Weight: 140 kg Auction-ID: A7-44802-378
Demolition hammer for mini-excavators, ideal for JPC HT12-HT15-PC10 models for excavators from 700 to 1800 kg, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-44803-14
Mini-excavator demolition hammer, ideal for JPC HT12-HT15-PC10 models for excavators from 700 to 1800 kg, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-44803-115
Mini-excavator demolition hammer, ideal for JPC HT12-HT15-PC10 models for excavators from 700 to 1800 kg, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-44802-45
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44802-398
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44802-388
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-44802-334
Demolition hammer for mini-excavators, ideal for JPC HT12-HT15-PC10 models for excavators from 700 to 1800 kg, never used Overall dimensions: 1000 x 400 x 500 mm Weight: 80 kg Auction-ID: A7-44802-14
maximum number of results exceeded
please refine your search
10 € 
