127,340 used machines on RESALE, but how to find them? Machine Search
for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available
rated capacity: 2000 KG ram hammer stroke: 1080 mm throat: 1100 mm impact capacity: 10000 kgm no. of strokes: 125 Hub/min ram hammer weight: 2300 kg work height max.: 620 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 800 kg workpiece length: . mm work piece width: . mm stroke: 500 mm total power requirement: . kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3x1,6x2 m Electric drive control block is missing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hammer drill, drilling machine HILTI TE 54 ( TE54 ) drilling capacity steel: 13 mm drilling capacity concrete: 52 mm 230 / 480 rpm 900 W 230 V with case Dimensions: 600 x 400 x 140 mm
Hydraulic Breaker Rammer 3288 E 3 times available Hydraulic Breaker Manufacturer: Rammer Type: 3288 E Year of Make: 2020 Strike hours: -Hammer 1- 935h -Hammer 2- 722h -Hammer 3- 660h Carrier class: 26.0 - 42.0 to. Weight : approx. 2400 kg Adapter plate: Verachtert CW 45 S Other: not overhauled, sold with chisel and hydraulic hoses
Key data: 150 kg, 480 mm, 375 mm
Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg
Inv. Num. : 8406 Type: M1340 Producer:- Generated: Parameters: Compressive force: 1000 kg Stroke: 1100 mm Maximum stroke rate: 71 1/min Anvil weight: 15000 kg Machine weight: 27000 kg Pneumatic hammer is after GO.
Inv. Num. : 8407 Type: MB 4134 Producer:- Generated: Parameters: Stroke: 625 mm Maximum stroke rate: 150 1/min Ram weight: 250 kg Anvil weight: 2800 kg Machine length: 2615 mm Machine width: 1180 mm Machine weight: 7850 kg
ram hammer weight: 26 kg ram hammer stroke: 200 mm type: KO : 596 no. of strokes: 220 Hub/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: . t stroke: . mm total power requirement: . kW weight of the machine ca.: 3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Krups A100 : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
6.800 litre, Stock number: T3984, Litre: 6.800, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: 4 pcs. legs, End bottoms: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: 650 x 850 mm., Agitator: Yes, Agitator type: Paddle agitator, Working temperature: 0/150° C, Working pressure double jacket: 3,5 bar, Inner diameter: Ø 1900 mm., Total height: H 2400 mm., Manufacturer: Hammerum Tullebølle A/S, Year: 2000
750 litre, Stock number: T3987, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Item: Transportation tank, Amount in stock: 9 pcs., Standing: On 4 pcs. legs with truck grip., Top: Conical, Bottom: Conical, Tank cover: On the top, Ø 400 mm., Inner diameter: Ø 940 mm., Total height: H 1680 mm., Manufacturer: Hammerum Tullebølle A/S, Model/type: FI 750
10.000 litre, Stock number: T3067, Litre: 10.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, closed, Bottom: Dished, Tank cover: In the side, bolted, Ø 400 mm., Working pressure: 3 Ato, Inner diameter: Ø 1900 mm., Total height: H 4150 mm., Manufacturer: Chr. L. Hammerum & Sønner I/S, Year: 1973
700 litre, Stock number: T2962, Litre: 700, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Flange for agitator at the top, Working pressure: 3 ATO, Inner diameter: Ø 790 mm., Outer diameter: D 950 mm., Total height: H 2215 mm., Manufacturer: Chr. L. Hammerum & Sønner I/S, Year: 1980
diameter: 400 mm workpiece length: 8000 / 9700 mm number of blows: 4 Forging power: 3600 (4x 900) kN no. of strokes: 270 Hub/min length: Hammer 610 mm Material Inlet Diameter: round: 400/ Square 320 mm Control: GFM CNC total power requirement: 1600 kW weight of the machine ca.: 493 t dimensions of the machine ca.: 44 x 20,5 m The line was mechanically overhauled in 1991 with an increase in forging force to 900 tonnes/hammer and a new CNC control system - CNC control GFM CNC - Forging machine SX-40 - 2 manipulators with beds -- Manipulator A - stroke: 7140mm -- Manipulator B - stroke: 9940mm -- Maximum diameter in the manipulator: 400 mm -- High travelling speed of the manipulator: 500 mm/sec. -- Feed speed of the manipulator: 10 - 200 mm/sec. infinitely variable - Loading/unloading: -- Loader: max. load capacity: 2500 kg --- max. workpiece length: 3000 mm --- Minimum workpiece length: 15 ...
diameter: 130 mm workpiece length: 4000 mm number of blows: 4 Forging power: 1600 per Hammer kN no. of strokes: 620 Hub/min length: Hammer 270 mm Material Inlet Diameter: round: 130 / Square 115 mm total power requirement: 280 kW weight of the machine ca.: t dimensions of the machine ca.: 24,7 x 16 m The line is complete with: - Forging Machine SX-13 - 2 (two) Manipulators with Beds -- Max. diam. in the Manipulator: 130 mm -- Manipulator torque force: 3 kN -- Manipulator high travel speed: 500 mm/sec. -- Manipulator feeding speed: 15 - 200 mm/sec. infinitely variable - Loading / Unloading Devices -- Bar Loader: max. load capacity: 300 kg -- max. work piece length: 2.100 mm -- min. work piece length: 00 mm -- Bar Unloader: max. load capacity: 300 kg -- max. work piece length: 4.000 mm -- min. work piece length: 500 mm - Electrics with Controls and Pulpits - Hydraulics and Pneumatics Curre ...
length: 880 mm weight: 60 kg height: 320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
loading area: mit Untergestell weight: 125 kg length: 900 mm height: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.
length: 620 mm width: 130 mm height: 300 mm weight: 88 kg : Antik Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity 7.25T /16000lbs Stroke 1727 mm weight 270t
Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t
Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t
weight max.: 1000 kg workpiece length: . mm work piece width: . mm Drive: elektr. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,2x2,1x2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenoning machine, tenoning machine, tenon hammer, slot rotor, finger jointing system -Recovering rotor: 2.2 kW 5650 rpm -Socket: Ø 30 mm -Saw motor: 3.5 kW 2870 rpm -Bore heads: 0.8 kW 2820 rpm -Adjustable drilling distance: 230-560 mm -Frequency converter Perske type: 7.5DW10/2 100 Hz 7.5 kVA -Length stop -Workpiece clamping: pneumatic -pneumatic feed -Dimensions: 1520/1800/H1400 mm -Weight: 1600 kg
Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W -Drilling/Percussion drilling -Speed: 0 - 800 rpm -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm -Weight: 10.3 kg
CONTROLS PLC SIEMENS S7 300 FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 70 mm wall thickness min.: 1 mm wall thickness max.: 6.5 mm MACHINE CHARACTERISTICS SWAGING force: 630 kN stroke rate (max.): 630 /min ELECTRICAL SPECIFICATIONS total power consumption: 40 kW Tube pointing machine HAGINGER AHM 63 with slide feeder S - Material: Steel tubes with a strength of 800 N/sqmm - Max. forming force: 4 x 630 kN - Drive motor power: 30 kW
pressure: . t total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight), Dango and Dienenthal HSM 12 manipulators, Merz bogie-hearth furnace, hood-type furnace, etc., wedge- ram spare parts, etc., mechanical workshop, oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We ...
Hammer BOSCH GSH 11E Heavy Duty, nameplate not traceable, case
Chisel Hammer BOSCH GSH 16 Bj. 2012, S/N 20800707, Case
Rotary hammer HILTI TE 605, S/N 03-033161, case, internal 98095
Rotary hammer BOSCH GBH 2-28 DFV, year 2011, S/N 106005580, accessories, HILTI case
Rotary hammer BOSCH GBH 2-28 DFV year 2014, S/N 406002209, case, internal no. no longer legible
Unused, 2 x 3.0 AH battery, case Auction-ID: A1-47951-123
Unused, 2 x 3.0 AH battery, case Auction-ID: A1-47951-184
Overall length 110 cm, diameter 13 cm, pointed chisel suitable for hammer HS1500 or HS1600, Year of construction: 1
Hammer drills and auger bits of various lengths and thicknesses see pictures Auction-ID: A1-48530-2227
Hydro generator with Honda GX270 9KP petrol engine Hose package Distribution unit Lifton Breaker Hammer Everything in good working condition Auction-ID: A1-47435-1101
Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-48621-389
maximum number of results exceeded
please refine your search
50 € 
