hammer mill used for sale

General SKU041H138 MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.L-14038 Year of construction1993 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill Attritorcheck Vertical sandmill:CoBall mill: (1x) Capacity± 0,5 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor3 kW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck With variable speed drivecheck MaterialStainless steel With jacketcheck General With switchcheck With switchgear(as is) Floorspace0,9x0,6 m Total height0,8 m Weight220 kg ATEX designedcheckStarchGreen FridayCatalysts & fillersDiscountDetergent & surf.CosmeticsFood additivesSugarConfectionerySand millsDyes & pigme ...

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

General SKU256Y259 LocationBarneveld CEcheck Main Features MaterialMild steel Volume0.25 Ltr. Motor1.5 KW Specified Features - Ball mill Ball millcheck CapacityMax 4 x 250 ml Drum sizesDia. 75x65 mm Motor1.1kW, 230V Speed30-400 rpm With ballscheck MaterialTool steel 1.2080 General MakeRetsch Haan Serial6260312 TypePM 4000 Year of construction1996 With switchcheck Floorspace0,83x0,70 m Total height1,20 m Weight350 kgSpicesBall millsCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsRetsch HaanIndustries > Food & Feed > SpicesMills > Ball millsIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal f ...

General SKU253M221 LocationBarneveld MakeBauermeister &: Co. Norderstedt TypeUT-63 Main Features Motor185 KW Inlet diameter1200 mm Width400 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 1200x400mm Grinding room sizeDia. 1200x400mm With sieve cage(Pore size ø 220 µm) With grinding trackcheck Housing dimensions 2000x0,55x1800 mm InletDia. 400 mm Motor185,0 KW, 415 Volt Fine Impact Mills MaterialMild steel, Stainless steel 1.4462 (Duplex2205) General No.940785 Year of construction1989 Mounted on framecheck Floor space3,9x1,5 m Total height3,0 m Weight8500 kg Extra information Extra Specifications-- RECONDITIONED --StarchReconditionedAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesFine Impact MillsDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes &  ...

This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details.

Key data: 711 mm, 406 mm, 392 mm

Offer a well-maintained Haas Mill DT 2 machining center with few power-on hours. Machine is in good condition and can be viewed under power by arrangement. Tool magazine 20 places Speed 10000 rpm Intake MK30 Approx. 50 tool holders are included. Travel x-y-z 711mm-406mm-392mm For more data, see pictures.

- Z Axis 1100 mm - X Axis 1310 mm - C Axsi Endles - Working range stage 1: 4000 - 8500 mm - Working range stage 2: 4000 - 11.500 mm

- Table size 3500 x 2500 mm - Siemens Simatic OP7 controller - Max. work load 80 Ton - New price 1 Mil EUR - Working force up to 250 Bar - Power 30 kW

- Pressure 0 - 250 Bar - T Size T-22 - Opening force 35 Ton - Closing force 150 Ton - Distance between column 2130 mm - Table height over floor 770 mm - Upper table rotation 180 Grad

- Closing force up to 18000 Kg - Opening force up to 15000 Kg - Driven table in & out feed - Upper table 270 Gr - Upper size 900 x 550 

General SKU291Y494 LocationBarneveld MakeBecomix TypeDH 1200 No.Unknown Main Features MaterialStainless steel Motor22 KW Rotor165 mm Specified Features - Inline mixer Rotor sizesø 165 x 45 mm Inletø 100 mm Outletø 75 mm Number of stages:1 (single rotor/stator, reversible DUO) Capacity± 1,200 l./min With mechanical sealcheck Motor± 22–37 kW Rotor speed± 3,000 rpm MaterialStainless steel 1.4408 General Year of constructionUnknown (est. ~1998–2010) Mounted on framecheck Floorspace1 x 0,65 m Total height0,75 m Weight350 kg Extra information BECOMIX DH-1200 DUO inline rotor/stator homogenizer with 2nd product supply connection. Green FridayBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesInline high shear mixersLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsOintmen ...

General SKU291Y501 LocationBarneveld MakeFryma TypeMK 175 K Motor Motor power11 kiloWatt Main Features MaterialStainless steel Motor11 KW Inlet diameter25 mm Specified Features - Colloid mill Colloid millcorundum Rotor sizesø 175 x 50 mm With jacketcheck Inletø 25 mm Outlet200 x 100 mm With mechanical sealcheck Motor11 kW (380 V, 2950 rpm) With variable speed drivecheck MaterialSilicon steel 1.5023, stone With jacketcheck General No.- Year of constructionunknown Floorspace0,55 x 0,55 m Total height1,2 m Weight350 kg Extra information Extra SpecificationsCapacity: 150–1,000 L/hr,Particle size: 40–150 µmBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatFrymaIndustries > Chemical > Biotechnolo ...

General SKU291Y518 MakeFryma TypeMS-12 No.M 11499 Year of construction1998 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.12 KW Specified Features - Sand mill Vertical sandmillcheck Capacity0,5 l. Housing dimensions ø 140 x 80 mm Inletø 20 mm Outletø 20 mm With jacketcheck Max. temperature80 °C Motor± 3 kW With variable speed drivecheck Rotor speed1000 - 3000 rpm Without ballscheck With pumpcheck Motor± 0,12 kW (0—550 rpm) With variable speed drivecheck Materialstainless steel 1.4000 (aisi 429) With jacketcheck General With switch(as is) Floorspace1,6 x 0,55 m Total height0,74 m Weight190 kgStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionerySand millsDyes & pigmentsMinerals & inorganicPaints & coatingsFrymaIndustries > Fo ...

General SKU291Y521 MakeWab Bachofen TypeKDL-Pilot No.860739 Year of construction1986 Main Features MaterialStainless steel Volume1 Ltr. Motor3.3 KW Specified Features - Sand mill Horizontal sand millcheck Capacity1 l. Housing dimensions Dia, 100x210 mm Inletcheck Outletcheck With mechanical sealcheck With jacketcheck Motor3,3 kW, 380 v. 3350 rpm, (Ex) Rotor speed1310-3350 rpm Material1.0257 St 44.4, 1.3505 100Cr6 With jacketcheck General LocationBarneveld With switchcheck Floorspace0,50x0,52 m Total height0,55 m Weight150 kg Extra information Extra Specifications2x StarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionerySand millsDyes & pigmentsMinerals & inorganicPaints & coatingsWab BachofenIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical >  ...

General SKU291Y529 MakeKrieger TypePM 30 No.5144/10/62 LocationBarneveld Motor Motor power0.75 kiloWatt Main Features MaterialStainless steel Motor0.75 KW Inlet diameter10 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesDia 30 x 15 mm Teethed rotorcheck With hopper(5 l) Inlet15 mm Outlet25 mm Motor0.75 kW (220 V, 7000 rpm) Speed7000 rpm MaterialStainless steel 1.4301 (304) General With switchcheck Floorspace0,3 x 0,3 m Total height0,7 m Weight25 kgBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatKriegerIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesMills > Colloid millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustrie ...

General SKU291Y530 MakePuc Probst &: Clas TypeN 4.5/0 No.S6086 LocationBarneveld Motor Motor power1.1 kiloWatt Main Features MaterialStainless steel Motor1.1 KW Inlet diameter30 mm Specified Features - Colloid mill Colloid mill3 stage rotor/stator Rotor sizesDia 40 x 45 mm Teethed rotorcheck With hoppercheck Inlet30 mm Outlet15 mm Motor1,1 kW (400 V, 2840 rpm) Speed2840 rpm MaterialStainless steel 1.4301 (304) General With switchcheck Floorspace0,4 x 0,25 m Total height0,65 m Weight25 kgBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatPuc Probst & ClassIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesMills > Colloid millsIndustries > Chemical > Detergent & surf.Industrie ...

General SKU291Y532 MakePuc Probst &: Class TypePuc 8 No.71074 Year of constructionunknown Mounted on framecheck Motor Motor power22 kiloWatt Main Features MaterialStainless steel Motor22 KW Inlet diameter90 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesDia. 140x80 mm Teethed rotorcheck With hoppercheck InletDia. 90 mm OutletDia. 60 mm Motor22 kW, 380 v., 2900 rpm Speed2900 rpm. MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace0,80x0,60 m Total height1,55 m Weight1000 kgBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatPuc Probst & ClassIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed addit ...

General SKU291Y536 MakeFryma SerialL10120 TypeMSZ 18 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.1 Ltr. Motor10 KW Specified Features - Sand mill Vertical sandmillcheck Capacity1.1 l. Housing dimensions ø 250 x 130 Outlet25 mm With jacketcheck Motor10 kW 380 V Without ballscheck With pumpcheck Motor0,37 kW 220 V (Ex) Materialstainless steel 1.4006 (AISI 410), Stainless steel 1.4301 (304), 1.4713 (Sicromal 8 / X10CrAlSi7) With jacketcheck General Year of construction1985 Mounted on framecheck LocationBarneveld With switchgearas is (Ex) Floorspace0,8 x 0,8 m Total height1,5 m Weight440 kgStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionerySand millsDyes & pigmentsMinerals & inorganicPaints & coatingsFrymaIndustries > Food & Feed > StarchIndustries > Chemical > Cat ...

General SKU291Y540 MakeFryma TypeCobalt-Mill MS-12 No.M15426 Year of construction1992 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill Vertical sandmillcheck Capacity0,5 l. Housing dimensions Dia. 140x90 mm Inletcheck Outletcheck With jacketcheck Motor3,0 kW, 380 V, 2880 rpm. With variable speed drivecheck Rotor speed1300-3000 rpm. With pumpcheck Motor0,12 kW, 380 v., 1370 rpm Materialstainless steel aisi aws316l 1.4430 With jacketcheck General With switchgearcheck Floorspace0,55x0,80 m Total height0,77 m Weight200 kg Extra information Extra SpecificationsTemperature meter glass broken. StarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionerySand millsDyes & pigmentsMinerals & inorganicPaints & coatingsF ...

General SKU291Y541 MakeFryma Koruma TypeDH-A 140/200 No.4.209 Year of construction1988 Motor Motor power11 kiloWatt Main Features MaterialStainless steel Motor11 KW Inlet diameter100 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 125 x 140 mm Teethed rotorcheck With hopper± 200 l. Inletø 100 mm Outletø 70 mm Motor11 kW, 380 V, 2910 rpm Speed2910 rpm MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchgearcheck Floorspace1,4 x 0,8 m Total height1,4 m Weight350 kg Extra information Extra SpecificationsWith vacuum BiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatFryma KorumaIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additives ...

General SKU291Y548 MakeFryma TypeMZ 190 No.41511/00 Year of construction±1995 Mounted on framecheck Motor Motor power55 kiloWatt Main Features MaterialStainless steel Motor55 KW Inlet diameter100 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesDia. 190x110 mm Teethed rotorcheck InletDia. 150 mm OutletDia. 100 mm With mechanical sealcheck Motorcheck MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace0,6x0,6 m Total height1,15 m Weight1000 kg CEcheck Extra information Extra Specificationswith aditional parts: - Stator Dia.: 165- 190 mm, height: 120 mm - rotor Dia.: 170-190mm, height: 120 mm - stator with crack, Dia.: 165-190 mm, height: 120 mm BiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric ...

General SKU291Y549 MakePuc Probst &: Class TypeM/MZ130 No.100573 Year of construction2004 Mounted on framecheck Motor Motor power25 kiloWatt Main Features MaterialStainless steel Motor25 KW Inlet diameter75 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 300 x 200 mm Cross teethed rotorcheck With jacketcheck InletDN75 OutletDN75 With mechanical sealcheck Motor25 kW 400 V 3540 rpm Speed3540 rpm MaterialStainless steel 1.4429 (316 LN) With jacketcheck General LocationBarneveld Floorspace1,2 x 0,7 m Total height0,9 m Weight350 kg CEcheck Extra information Extra Specificationswith electric mechanical gap adjustment BiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatPuc Probst &  ...

General SKU313Y647 MakeRetsch TypePM400 No.TU 2145 Year of constructionunknown LocationBarneveld Main Features MaterialCeramic Volume0.4 Ltr. Motor1.5 KW Specified Features - Ball mill Ball millcheck Capacity4 x 400 ml Drum sizesDia. 80x80mm InletDia. 60mm Motor1,5kW, 230v Speed30-400 rpm MaterialCeramic General Mounted on wheelscheck With switchcheck Floorspace0,83x0,70 m Total height1,20 m Weight250 kgSpicesBall millsCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsRetschIndustries > Food & Feed > SpicesMills > Ball millsIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > F ...

General SKU440X1396 LocationBarneveld MakePallmann TypePP-6 Material Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) Main Features MaterialMild steel Motor30 KW Specified Features - Miscellaneous Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeø 600 x 120 mm: ø 700 x 300 mm Grinding room sizeø 760 x 200 mm House jacketed2x Inlet190 x190 mm Feeding with vibro feeder(Not available but possible) Motor11 kW, 380 V, ± 1480 rpm: and 30kW, 380 V, 1465 rpm Speed11 kW: ± 1480 rpm. and 30 kW: ± 2051 rpm With jacketcheck Miscellaneous Mills MaterialSilicon steel 1.5023 General No.0768759 Year of construction1968 Floor space1,2 x 1,4 m Total height1,4 m Weight900 kg Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unitStarchAgrochemicalsPlastic & polymersCatalysts & fillers ...

General SKU440X1456 LocationBarneveld MakePallmann TypePP-6 Material Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) Main Features MaterialMild steel Capacity30 KW Specified Features - Miscellaneous Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeø 600 x 120 mm: ø 700 x 300 mm Grinding room sizeø 760 x 200 mm House jacketed2x Inlet190 x190 mm Feeding with vibro feeder(Not available but possible) Motor11 kW, 380 V, 1480 rpm and 30 kW, 380 V, 1480 rpm Speed11 kW: ± 1090 rpm and 30 kW: 1480 rpm With jacketcheck Miscellaneous Mills MaterialSilicon steel 1.5023 General No.0772828 Year of construction1972 Floor space1,2 x 1,4 m Total height1,4 m Weight750 Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unit&:nbsp:StarchAgrochemicalsPlastic & polymersCatalysts & fillers ...

General SKULY008 CEcheck Main Features Motor110 KW Specified Features - Fine Impact Mill Pin disc millcheck 2 Driven rotorscheck Rotor sizeø 630 mm Number of pins on house side:148 / 89 (2 pin rows) Number of pins on door side:228 / 137 (3 pin rows) Pin diameter10 mm (head ø 17 mm), length 75 mm Without sieve cage(screening by external Allgaier tumbler screen) Feeding with rotating valvecheck Motor2x 55 kW With variable speed drivecheck Speedhousing side: 700–3,550 rpm: door side: 700–3,150 rpm Fine Impact Mills MaterialStainless steel 1.4404 (316L), Stainless steel 1.4541 (321) General MakeHosokawa Alpine SerialN1 226486 / 1000 TypeContraplex 630 C — high-speed pin (pin-disc) mill, cold-milling capable, pressure-shock resistant 0.5 bar(g) Year of construction2016 Mounted on framecheck With control cabinetcheck With switchgearcheck Floor space2,24 x 1, ...

General SKU440X1404 LocationBarneveld Material Product contact materialMild steel Extra information Rotor speed7300 rpm Main Features MaterialMild steel Motor18.5 KW Rotor305 mm Specified Features - Miscellaneous Mill Grindercheck Rotor size305 mm Grinding room sizeø 420 x 55 mm With grinding platenscheck Inletø 100 x 50 mm Feeding with vibro feedercheck Motor2x 18,5 kW (380 V, 2920 rpm) Miscellaneous Mills MaterialMild steel General MakeWedco (type plate missing) TypeSE-12 Year of constructionUnknown Mounted on framecheck Floor space2,0 x 0,9 m Total height1,2 m Weight1000 kg Extra information vibro feeders, type: GKA-11 StarchAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedOther feedDyes & pigmentsMiscellaneous MillsMinerals & inorganicGeneric medicinesPowdered foodsP ...

General SKU440X1405 LocationBarneveld MakeWedco (type plate missing) Material Product contact materialMild steel Technical specs Rotor speed7300 rpm Main Features MaterialMild steel Motor18.5 KW Rotor305 mm Specified Features - Miscellaneous Mill Grindercheck Rotor size305 mm Grinding room sizeø 420 x 55 mm With grinding platenscheck Inletø 100x50 mm Feeding with vibro feedercheck Motor2x 18,5 kW, 380V, 2920 rpm Miscellaneous Mills MaterialMild steel General TypeSE-12 Year of constructionUnknown Mounted on framecheck Floor space2,0x0,9 m Total height1,2 m Weight800 kg Extra Specificationsvibro feeders, type: GKA-11StarchAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedOther feedDyes & pigmentsMiscellaneous MillsMinerals & inorganicGeneric medicinesPowdered foodsPaints & c ...

General SKU291Y483 LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor4.25 KW Specified Features - Sand mill Horizontal sand millcheck Capacity0,1 l. Housing dimensions ø 90 x 200 mm Inletcheck Outletcheck With jacket1,2 l. Max. temperature70 °C Motor4,0 + 0,25 kW, 400 V With gear boxcheck With ballscheck With pumpcheck Motor0,25 kW (230/400 V 1310 rpm) MaterialStainless steel 1.4571 (316Ti) With jacketcheck General MakeDraiswerke Serial56213 TypePML-H/V Year of construction2000 With switchgearcheck Floorspace0,70 x 0,80 m Total height0,70 m Weight200 kg Extra information Extra SpecificationsWith heating unit inside Volume 0,1 l StarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionerySand millsDyes & pigmentsM ...

General SKU291Y502 LocationBarneveld Main Features MaterialStainless steel Volume1.5 Ltr. Motor1 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions ø 105 x 200 mm Inletø 20 mm Outlet25 x 25 mm With jacketcheck Motor0,75 kW (380/220 V 2860 rpm (Ex)) Rotor speed2860 rpm Without ballscheck Capacity± 1,7 l. With pump3,6 l./min Motor0,12 kW (320/220 V 1400 rpm) MaterialStainless steel With jacketcheck General MakeDraiswerke Serial50215 TypePM 1 Year of construction1980 Floorspace0,8 x 0,5 m Total height0,85 m Weight100 kg Extra SpecificationsVolume 1 lStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionerySand millsDyes & pigmentsMinerals & inorganicPaints & coatingsDraiswerkeIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chem ...

General SKU291Y511 MakeCondux TypeCUM 100 No.5988 Year of construction1992 Main Features MaterialStainless steel Shell (Material)Stainless steel Specified Features - Fine Impact Mill Grindercheck Rotor sizeø 95 mm Grinding room sizeø 100 mm With sieve cagecheck Housing dimensions ø 100 mm With hoppercheck Inletø 30 mm Feeding with vibro feedercheck Motorcheck With variable speed drivecheck Speed3000/6000 rpm Fine Impact Mills MaterialStainless steel General LocationBarneveld Mounted on wheelscheck With switchcheck Floor space0,90 x 0,60 m Total height1,60 m Weight200 kgStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesFine Impact MillsDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicGeneric medicinesP ...

General SKU291Y512 LocationBarneveld CEcheck MakeFryma TypeML/MK 180 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter100 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 115 x 40 mm Teethed rotorcheck Inletø 100 mm OutletDN50 Motor18,5 kW (380 V 2925 rpm) MaterialStainless steel 1.4435 (316L) General No.M15177/78 Year of construction1991 Mounted on framecheck Floorspace0,9 x 0,65 m Total height1,5 m Weight270 kgBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatFrymaIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesMills > Colloid millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Foo ...

General SKU291Y473 LocationBarneveld MakeFryma Koruma TypeDisho V160/400 Main Features MaterialStainless steel Inlet diameter120 mm Specified Features - Colloid mill Colloid millcheck Colloid mill in linecheck Rotor sizesø 140 x 80 mm With hopper± 170 l. Inletø 120 mm: DN80 OutletDN80 Motorcheck With gate type stirrercheck With scraperscheck Motor1,1 kW (230/400 V 1420 rpm) With vacuum pumpcheck Motor0, 75 kW: 3 m³/h MaterialStainless steel 1.4571 (316Ti) General Year of construction1992 Floorspace1,99 x 2,63 m Total height2,875 m Weight2024 kgBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatFryma KorumaIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesMills > Colloid ...

General SKU291Y488 LocationBarneveld MakeFryma Main Features MaterialStainless steel Motor11 KW Inlet diameter120 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 120 x 130 mm Teethed rotorcheck Inletø 120 mm OutletDN50 Motor± 11 kW Speed± 2920 rpm MaterialStainless steel 1.4429 (316 LN) General TypeMZ 120 R No.F65.4367 Floorspace0,4 x 0,55 m Total height0,76 m Extra Specifications- stator is not includedMechanical seal onbreektBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatFrymaIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesMills > Colloid millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Foo ...

General SKU291Y829 MakeFryma TypeDKF 10 No.618072 LocationBarneveld Main Features MaterialStainless steel Motor17.5 KW Inlet diameter150 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 120 x 60 mm With hoppercheck Inletø 150 mm Outlet200 x 60 mm Motor17,5 kW (380 V, 2880 rpm) Speed2880 rpm MaterialStainless steel 1.4552 General Floorspace0,45 x 0,45 m Total height1,36 m Weight200 kg Extra Specifications- perforated disc is not includedBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatFrymaIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesMills > Colloid millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Fee ...

WFL M 35 G MILLTURN ist ein CNC Dreh-Fräs-Bohrcenter hoher Präzision, Genauigkeit und Zuverlässigkeit. Leistungsdaten: Spitzenweite 2000 mm, Dreh-Ø max 520 mm, Spindelbohrung 77 mm; Verfahrwege Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Technische Daten: Hauptspindeln bis 4000 min-1, 29/33 kW (551/630 Nm), angetriebene Werkzeuge 6/13 kW, Frässpindel 9000 min-1 15/20 kW (165 Nm); Eilgänge Z 40 m/min X 30/10 m/min; Gewicht ~20000 kg; Abmessungen 7900×5700×3250 mm. Ausstattung: Lampe, Kühleinrichtung, Papierfilter, Ölnebelabsaugung, Späneförderer, automatische Be-/Entladung, Messsystem Renishaw. Für enge Toleranzen, Anwendungen in Automotive, Luftfahrt, Medizintechnik, Uhrenfertigung und Maschinenbau. Technische Daten ohne Gewähr

Vertical High-Speed Machining Center Manufacturer: DMG Mori Type: MILL TAP 700 Year of Make: 2014 Control: Siemens 840D SL Travel paths X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool Magazine: 15 Slots Weight approx.: 4.100 kg Automation with robots Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Robot Fanuc

General SKUCY001 MakeNETZSCH (NETZSCH-Feinmahltechnik GmbH) Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialCeramic Volume21.95 Ltr. Motor30 KW Specified Features - Sand mill Horizontal sand millcheck Capacity21,95 l. With sieve0,40 mm at drain plug + slotted pipes (spare screens 0,7 / 0,4 / 0,2 mm) With mechanical sealcheck With jacketwater cooled, approx. 2300 l/h, max. 3 bar Motor30 kW, 400 V / 50 Hz (Ex de IIB T4) With variable speed drivecheck Rotor speedPeripheral speed 4,6–13,7 m/s (9,1 m/s at 50 Hz): With pumpcheck MaterialCeramic, Glass, Stainless steel With jacketcheck General TypeAgitator mill DISCUS 30 – DISCUS INTENSIVE grinding system (horizontal bead mill) Year of construction2021 Mounted on framecheck With switchcheck Floorspace1,7 x 1,1 m Total height1,8 m Weight1300 kg Extra information Extra Specific ...

General SKU280Y280 LocationBarneveld MakeHosokawa Alpine Material Product contact materialStainless steel Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) Jet Mills MaterialStainless steel 1.4305 (303) General Serial167821 Type100 AFG No.28198/1 Year of construction1990 Mounted on framecheck With switchcheck With switchgear(as is) Floor space1,9 x 1,1 m Total height2,1 m Weight500 Extra information - three configuration of product flow possible StarchAgrochemicalsPlastic & polymersJet MillsCatalysts & fillersFeed additivesDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedOther feedDyes & pigmentsNew arrivalsMinerals & inorganicGeneric medicinesPowdered foodsPaints & coating ...

General SKU283Y441 MakeHosokawa Alpine Year of construction2008StarchSpicesClassifier millsCatalysts & fillersFeed additivesDetergent & surf.CosmeticsFood additivesSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalMinerals & inorganicGeneric medicinesPowdered foodsHosokawa AlpineIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesMills > Classifier millsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Pharmaceutical > Solid pharmaceuticsIndustries > Chemical > Dyes & pigmentsIndustries > Pharmaceutical > BiopharmaceuticalIndustries > Chemical > Minerals & inorganicIndustries > P ...

General SKU339Y837 LocationBarneveld CEcheck Main Features MaterialStainless steel Volume20 Ltr. Motor17.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity20 l Housing dimensions Dia. 200x600 mm InletDN30 OutletDN30 With mechanical sealcheck With jacketcheck Motor17,5 kW (400 V, 1475 rpm, (Ex)) With variable speed drivecheck Capacity21,2 l MaterialCeramic, Stainless steel 1.4305 (303) With jacketcheck General MakeNetzsch Serial204224 TypeLME 20 Year of construction1995 With switchgear(as is) Floorspace1,60 x 0,70 m Total height1,80 m Weight600 kgStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectionerySand millsDyes & pigmentsNew arrivalsMinerals & inorganicPaints & coatingsNetzschIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chem ...

Vertical CNC Manufacturing Center Chiron Mill 2000 Control: Heidenhain TNC 640 Year of manufacture: 2023 Internal machine no. 82 Travels: X-axis: 2,000 mm Y-axis: 895 mm Z-axis: 715 mm Clamping area: 2,600 x 910 mm Interference circle Ø: approx. 1,150 mm Mount: HSK-A63 Tool magazine: 40 – compartment Spindle speed: 50 - 12,000 rpm spindle Accessories - NC swivel head with headstock - Water-cooled motor spindle - Integrated rotary table Ø 500mm - Probe Blum TC54-10 - Coolant system KNOLL KF 400/900 - Chip conveyor KNOLL 600 K-3/4000 - 2 rinsing guns

Ref. -No.: 10651 Manufacturer: CHIRON Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

x-travel: 2000 mm y-travel: 630 mm z-travel: 550 mm total power requirement: 51 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 8 x 4,5 x 3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With a robust 1700W motor, this breaker is built to deliver excellent performance. It generates a staggering 65J of impact force, making it your first choice for high-speed chiseling and material removal tasks. This tool is a versatile workhorse that can handle a wide range of heavy materials, including brick, blocks, asphalt, and concrete. The 30mm Hex Chuck provides a firm grip on your chisels and bits, allowing for precise and efficient work. pointed chisel 30hex x 410mm - flat chisel 30hex x 410mm Model 21-DH1700 Voltage 230V 50Hz Power 1700W Hammer impact frequency 0-1900 blows per minute Hammer impact force 65J Claw 30mm hexagon Shift type Tractor with lock on Cable length 3m Product type Power tools (accessories) EAN 5056485700589 In the box 1x JCB 1700W demolition hammer, 1 x side handle, 1 x pointed chisel 30hex x 410mm, 1 x flat chisel 30hex x 410mm, 1 x spare pair of carbon br ...

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

BOSCH Professional GBH 3-28 FE rotary hammer. 720 W, impact energy 3.3 J, 0-4000 blows per minute, 0-800 rpm, weight 3.3 kg. Drilling capacity: concrete 4-28 mm, masonry core bits up to 80 mm, steel 13 mm, wood 30 mm. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-58

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...