hal used for sale

Halter Load Assistent 20 BJ 2014 Few operating hours CE declaration of conformity is available div. CD for installation Operating instructions Electrical schematic

cutting diameter: 230 mm capacity 90 degrees: flat: 320 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: flat: 230 x 140 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 190 x 190 mm capacity 60 degrees: flat: 120 x 105 mm capacity 60 degrees: square: 105 x 105 mm capacity 60 degrees: round: 120 mm turning speed range:: 35 - 70 m/min dimensions of saw-band: 2720 x 27 x 0.9 mm height of material-table: 950 mm total power requirement: 1.0 / 1.5 kW weight of the machine ca.: 410 kg dimensions of the machine ca.: 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User ma ...

Used Doka supporting heads H20 DF for securing props to prevent falling down.  The heads are serviced and ready to use. The material shows only minor traces of concrete. The price per piece does not include the necessary Doka multi trip transport box 1.20x0.80m. 1 transport box includes 350 supporting heads. Price: from € 5,80 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 5644 x Supporting head H20 DF (Art-No. 586179000), 3 stars, € 5.8 / pc

Used Doka supporting heads H20 DF for securing props to prevent falling down.  The heads are serviced and ready to use. The material shows medium signs of use. The price per piece does not include the necessary Doka reusable container 1.20x0.80m. 1 container includes 350 supporting heads. Price: from € 5,80 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 1701 x Supporting head H20 DF (Art-No. 586179000), 2 stars, € 5.8 / pc

Construction: 4-column frame with slip ring, applicator for applying cover films Capacity : 45 pallets/h Equipment : Ring winder with 1 film roll Control : Siemens S7

The Haloila Octopus Junior stretch wrapping machine is a suitable solution for safe and efficient pallet wrapping. Thanks to its compact design, low energy consumption and automatic winding function, it can be easily integrated into production processes. This model from 2012 was used in the beverage industry and was regularly maintained. The current condition and technical details can be assessed during a visit.

15 BBL working capacity stainless steel vertical cylindrical mash tun, with side entry door for spent grains removal. Drilled plate floor removable in 4 sections. Sparge arm and bridge. Vessel is free standing on stainless steel removable legs. Has a 2" RJT Female outlet. Lid consists of one half moon shape section. Overall Height from ground - 2500mm Internal Diameter - 1550mm Overall Diameter - 1650mm Internal Vessel Height - 1550mm 50mm of insulation to the shell, with stainless steel cladding pop riveted. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU397X1124 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature0 — 200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.5714.02-07 Year of construction2007 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU397X1125 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.559602 Year of construction2000 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

General SKU383W1174 MakeHermann Waldner LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume170 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity170 l. Vessel sizesDia. 800x850 mm Dished bottomcheck Top connectionscheck OutletDN30 With jacketcheck Max. temperature150°C With propellor stirrercheck Motor0,55 kW (380 V, 950 rpm (Ex)) Speed mixing shaft0-390 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.1389 Year of construction1983 Mounted on legscheck and wheels With switchcheck Floorspace1,00x1,20 m Total height2,40 m Weight500 kg Extra SpecificationsCoating inside, outside off jacket 1.4306Stainless Steel ReactorsHermann WaldnerReactors > Stainless Steel ReactorsBrand > Hermann Waldner What y ...

Record Gr.2 Semi-Automatic Roll Press Dough Dividing and Rounding Machine - Manufacturer: Record - Semi-automatic bun press - Size 2 - Weight range: 25- 85 grams - 30 pieces - 380 volts - Machine is completely NEW painted

Offer 26070 Technical data: - Max. load capacity in horizontal position 7500 kg - Face plate dimensions 1500 x 1500 mm - Face plate motorized swivel 0 - 120 ° - Rotary movement electr. infinitely variable 0.0028 - 1.04 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V x 25 kW - Table height in horizontal position approx. 1600 mm - Handheld remote control - Space requirement approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

cutting diameter: 335 mm saw band length: 4400 x 34 x 1.1 mm capacity 90 degrees: flat: 500 x 335 mm capacity 45 degrees: round: 305 mm capacity 45 degrees: flat: 305 x 335 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 335 mm clamping range: 0 - 500 mm work height max.: 750 mm coolant capacity: 100 l engine output: 3.0 kW weight: 1320 kg range L-W-H: 1450 x 2350 x 1950 mm in a well-kept condition current new price machine approx. 35.000 euros special price on request Equipment: - robust electro-hydraulic mitre bandsaw semi-automatic (INDUSTRY) Particularly suitable for universal use in a variety of applications . cross-sections, materials and frequently changing miter cuts Semi-automatic sawing sequence with workpiece clamping-sawing-raising - Central machine operation - stepless manual miter adjustment miter adjustment 45°li - 90° - 45°re - 30° ...

Roll Press Erika Record Semi-Automatic Product Description Manufacturer: Erika Record Type: Semi-Automatic Condition: used, functional, baker's condition Roll press for all doughs for dividing dough and rounding 30-piece Details see pictures.

Bread Press Fortuna Semi-Automatic Dough dividing and rounding machine Semi-automatic 30-piece Parting head NEWLY revised only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled

Roll press Fortuna-Schröder semi-automatic machine size 3â Product descriptionâœ" Manufacturer: Edmund Schröderâœ" Type: Fortuna Semi-automatic machine size 3âœ" 30 divisionâœ" Dough part and knitting machineâœ" Power supply: 400 V, 50 Hz, 1.1 kW For details see pictures.

saw blade diameter: 800 x 800 x 1500 mm cutting diameter: 200 mm stroke: 150 mm dimensions of the machine ca.: m total power requirement: 3 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle 

General SKU066A334 MakeHalvor Forberg A/S Larvik Norway TypeFT-200 No.S12-94 Year of construction1994 Mounted on framecheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Paddle mixer Paddle mixercheck Double shaftcheck Useful capacity200 Ltr. Trough sizes1000x850x950mm ManholecheckInspection hatch 785x410mm OutletDia. 220 mm Motor5,5 KW, 380/660 Volt MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace 1,7x1,6 m Total heightmixer without filter 2,5m Weight2250kg Extra Specifications- Equipped with Forbergs PMS Pin Mill System = 2 high speed rotating shafts with welded pins - Heat exchanger and fan are missing - With nozzles for liquid injection - :With envelope filters Paddle mixersCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pha ...

General SKU045C405 MakeHalvor Forberg A/S Larvik TypeF-1000 No.1904 Year of construction1997 LocationBarneveld Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume1000 Ltr. Motor30 KW Specified Features - Paddle dryer Paddle dryer(1x) Double shaftcheck Capacity3500 Ltr, Useful capacity 1000 Ltr Trough sizes1350x1695x1400mm InletDia: 300mm ManholeFull acces via door OutletDia: 590mm With jacketcheck 31 Ltr. Max. temperature150°C With adjustable packing glandscheck Motor30 KW, 380/660 Volt Speed mixing shaft± 32 Rpm MaterialStainless steel 1.4401 (316) Information Floorspace3,7x2,3 M Total height3,4 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Paddle dryersCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySoli ...

Exhibition/sales and warehouse hall, which is to be dismantled soon. Net floor area: 1578.65 m2 on the ground floor according to the building application; Hall length: 48.45 m length of roof edge Ache A to axis L; 44.10 m length of roof edge without canopy (Ache B to axis L); 43.20 m axial dimension corner supports; Frame spacing: 4.80 m axial dimension axis B to axis L; System length: 43.20 m MM end frame; Truss spacing: 4.80 m (x9); Hall width: 52.88 m AK canopy (axis 1 to axis 12); 39.30 m AK wall cladding; 38.40 m axial dimension for external outriggers (axis 4 to axis 9); Barrel width: 24.00 axle dimension (axis 4 to axis 9); Clear width: 14.40 m MM main beam (axis 5 to axis 8); Canopy height: 5.30 m in Ache 1; Height gallery: 5.24 m; Height of barrel ridge: 10.71 m ridge height; Arched roof inclination: 12 degrees; SUPPORTING STRUCTURE: the load-bearing steel structure consi ...

Ladies and gentlemen, We allow ourselves, on the basis of our general terms and conditions below: Offer warehouse: The mass of the hall are: Snow load 75 Kg . The price of the hall without dismantling. The dismantling of the hall could be taken over by us. The reconstruction of the hall can be organized At the moment we can offer other high-quality halls in the size of 150 m2 to 12,000 m2. We will be happy to send you an offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical  ...

Ladies and gentlemen, Offer: 2 used HALLEN see pictures Dimensions approx. width 21.00m / length 40.00m / eaves 9.00m / first 9.65m Snow load approx. 85 kg/m2 / 2 x crane 12.5 tons approx. 13 meters wingspan Condition very good Sightseeing is possible at short notice. PRICE: on request The price of the hall without dismantling. The dismantling of the hall could be taken over by us. The reconstruction of the hall can be organized At the moment we can offer other high-quality halls in the size of 150 m2 to 12,000 m2. We will be happy to send you an offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake ...

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

Half Round Slicer (Staylog) Manufactured by Valette&Garreau Model: STL-33

Steel hall, cooling hall sandwich panels clad used used Tem. Range approx. 3-12° C Walls: sandwich panels, PU foam approx. 100 mm Roof: trapezoidal sheet + 2x 60 mm insulation + rubber skin with jumper system and dehumidification The hall is separated in the middle by a partition wall. the cooling system is not part of the offer for the time being. In both halves there are 2 rows of double shelves, in the middle with autom. Shelf assemblers Shelf manufacturer: SCHÄFER Year of construction: 2006 approx. 4700 pallet spaces Galvanized steel sheet Shelf depth: approx. 1000 mm Compartment height approx. 1800 to 2000 mm Compartment width approx. 2900 mm compartment load 2x24 kN field load 537.6 kN Total dimensions approx. 50 x 15 x 30 m (LXWXH) Changes and errors in the technical data, information and prices as well as prior sale reserved.

Hall 8.000 m ², 40 x 200 m, 7 m high (eaves) steel Hall / steel construction, self-supporting,. -Sheet metal walls, w/o roof sheet, self removal -smaller units possible, German Hall

Halls solid sheet metal partitions 10.20 x 10.90 meters Solid sheet metal partition walls can be used for the subdivision of hall areas into industrial halls and warehouses, but also for halls with production processes. They are used wherever separate work areas are necessary, or where work areas have to be closed off or separated. The flexible system has a modular design and enables fast assembly and thus a short-term implementation of your project Mass: HxDxW = 3.60 x 10.20 x 10.90 metres Double wing door width 2.30 metres Further storage technology - new and used - can be found in our shop! International shipping costs on request!

Working Length: 4000 mm

Reznor UDSA Gas Air Heater Gas WLE Type: UDSA050-4E Gas Appliances Type: BSP-C12-C32-C52-C62 Purpose: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. nominal heat load (Hs) QN: 58.60 kW Max. Nominal Heat Load (Hi) QN: 52.80 kW Min. Nominal Heat Load (Hs) QN: Min. Nominal Heat Load (Hi) QN: Max. nominal heat output: 48.58 kW Min. nominal heat output: Connection voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Degree of protection: IP20 Pin No. 0461BN0677 UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can  ...

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modula ...

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

For sale is the supporting structure of a dismantled industrial hall (built in 1983) with an original floor area of approx. 2,300 m². The steel frame structure consists of bolted IPE solid wall rolled sections (IPE 550 columns, IPE 450 trusses) and is completely hot-dip galvanized – ideal for the reconstruction of an industrial, warehouse or production hall. Technical key data: Hall width: approx. 24.5 m, length: approx. 93.5 m. Eaves height: approx. 6.3 m | Ridge height: approx. 7.2 m. Supporting structure: hot-dip galvanized steel frame construction (without crane rails / without wall and roof cladding). Documentation: Original statics, plans available. Condition: Dismantled, ready for transport Location: Mayen-Koblenz district (Rhineland-Palatinate) Price: The net sales price of the hall construction will be communicated on written request with complete company da ...

Steel hall, steel construction, trapezoidal sheet clad used Manufacturer: unknown Dimensions approx. 28 x 10 x 23 m The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Option: HALTEC Stahlflex SH10 – Lightweight steel hall 20 × 20 × 5 m (YOC 2023) Reference number: hbs401sG. Are you looking for a lightweight building that is as good as new, easy to assemble for storage, production or seasonal use? Then secure the option of a modern steel system hall from the renowned manufacturer HALTEC, built in 2023, type Stahlflex SH10 - available for prompt implementation! ✅ Core design System type: HALTEC steel flex SH10. Year of construction: 2023. Roof shape: gable roof with 10° inclination. Wingspan: 20.00 m. Length: 20.00 m. Eaves height: 5.00 m (upper edge of support). ️ Supporting structure Frame construction: Double-hinged frame made of IPE 270 (S 355) with FL 80x15 (S 355) drawstring. Gable frame: Trusses & corner supports: IPE 270 (S 355). Gable supports: IPE 180 (S 235). Design class: EXC2 according to EN 1090. A ...

Steel hall, steel construction, nacelle trapezoidal sheet clad used Manufacturer: unknown Trapezoidal sheet metal clad Dimensions approx. 5 x 5 x 8 m Weight approx. 4 t The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...

Construction & Dimensions Floor space: Hall 15.35 m x 24.49 m plus canopy (depth 3.82 m). Roof pitch: The gable roof has an inclination of 15° (canopy 10°). Weight estimate: The steel structure is estimated to be approx. 18 to 22 tons (pure steel weight without cladding). This serves as the first basis for your logistics planning. Base & façade The hall was originally mounted on a 40 cm high clinker brick base. Since this is omitted during dismantling, a corresponding plinth (e.g. made of precast concrete elements or masonry) would have to be prepared on site for the reuse of the original wall panels before reassembly in order to maintain the connection heights of the façade. Foundation & Clearance Areas Foundation planning: The hall was founded on strip foundations with a 15 cm base slab. Since the soil conditions at your new location can vary, the foundation statics s ...

Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater -Eltra item no.: 1BGL1CE04001 -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

- Content: 68 + 7 HL - With vibrating spout - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Hopper height : 1440 mm

Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 500 watts -Number: 6x lights available -Price: per piece -Dimensions: 245/170/ H620 mm -Weight: 4.8 kg/piece

Workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 165 watts -Number: 1x lamp available -Dimensions: 540/540/H710 mm -Weight: 9.7kg

New Part Number: 0206 5542 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Bearing bushings, half-shell, drill bushing -Number: 6x AL 16065 (John Deere) Price: complete -Weight: 2.1 kg

Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press

Auction-ID: A1-41275-348

Auction-ID: A1-44765-6

Auction-ID: A1-44765-20

In working order, battery drains quickly. Auction-ID: A1-40133-212