Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163469488

used

Seller: Exapro
Location: Land-es
Price: 21.000 € add to watchlist

Hydraulic guillotine shear HACO TSX3006 The machine is located in Spain.

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 163127142
New in: 1989

used

check Seller: Retec Machines S.A.S
Location: 68190 Ensisheim Land-fr

add to watchlist

Hydraulic Shear HACO TSL-3013 Cutting capacity: 3050 x 13 mm Back gear gauge travel: 1000 mm Year of construction: 1989 Voltage: 380 V Weight: approx 10 T

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163484779
New in: 1988

used

Seller: Exapro
Location: Land-es
Price: 12.500 € add to watchlist

Shear with a capacity of 3 mts x max. 12 mm of mild steel cutting thickness,

Category: 107 sheet metal working / Hydraulic Shear
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163407186
New in: 2024

new

check Seller: VOLZ Werkzeugmaschinen GmbH & Co.KG
Location: Witten / Germany Land-de

add to watchlist

: 3050 mm : 12,0 mm : - : 0,5-3,0 ° : 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working / Guillotine Shears
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 162443402
New in: 2006

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 23.335 € add to watchlist

Key data: 3100 mm, 6 mm

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

Category: 107 sheet metal working / CNC Pressbrakes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 160926092
New in: 1999

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 19.025 € add to watchlist

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

Category: 107 sheet metal working / CNC Pressbrakes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 162443417
New in: 2006

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 60.000 € add to watchlist

Key data: 135 t, 3150 mm

HACO ERMS 36-135 CNC press brake was built in Belgium in 2006. The machine, with its robust construction and high press force of 135 tons, is ideal for even the most demanding machining of workpieces with a length of 3600 mm. To ensure a high level of safety and ease of use, the ERMS 135T CNC press is equipped with the intuitive HACO ATS 560 control and light curtains which prevent unwanted entry of the operator into the working area. The total weight of the press is approximately 88000 kg. Technical data of the HACO ERMS 36-135 press brake - maximum press force: 135 t - maximum sheet metal length: 3600 mm - controller: HACO ATS 560 - bending speed: 10 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - slider stroke: 200 mm - reaction time: 75 ms - distance between body walls: 3150 mm - safety distance: 300 mm - light curtains - foot control - motor power: 15 kW - ...

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163506036
New in: 1994

used

Seller: Exapro
Location: Land-pl
Price: 11.000 € add to watchlist

Prasa krawędziowa HACO 36-135 135 wyprodukowana w 1994 roku w Belgii. Parametry techniczne: -· Made by :- HACO, Belgium · Model :- PPH 36135 · Year Of Manufacturing: - 1994 · Capacity- 135 Ton · Maximum press force: 135 Ton · Maximum sheet metal length: 3600 mm · Controller: HACO ATL 550 · Bending speed: 10 mm/s · Approach speed: 100 mm/s · Return speed: 80 mm/s · Slider stroke: 200 mm · Reaction time: 75 ms · Distance between body walls: 3150 mm · Safety distance: 300 mm · Foot control · Motor power: 15 kW · Maximum operating pressure: 300 bar · Power supply: 380 V · weight of machine: approx. 8 Ton

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158219210

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 13,00 mm void: 0 Table length: 3100 mm Table width: 1000 mm Knife length: 0 mm Make HACO 13 mm Type HSLX 3013 Year 2005 haco hslx 3013 with NC system SC 70 Sheet thickness (mm)T = 13 mm Sheet width (mm) L = 3.100 Depth rear gauge (mm)D = 1.000 NC system SC 70 Power 400 V / 22 kW New Euro 45.000  

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158219263

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 4,00 mm Sheet width: 1500 mm Depth rear gauge: 0 mm Make Haco 4 mm Type SST 1504 Year 2002 SP8 Robosoft Haco schaar Sheet thickness (mm)T = 4 mm Sheet width (mm) L = 1.500 mmDepth rear gauge (mm)Swing beam Back stop 750 mm

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158219264

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Capacity: 135 t Folding length: 3100 mm CNC Brand: Robosoft CNC Model: ATL 2000 Make Haco 135 Ton Type ERM 30135 (Euromaster) Year 1992 Robosoft ATL 2000 - CNC Abkantpresse haco Capacity (metric tons) 135 Ton Folding length (mm)3.100 mm Down stroke or Up stroke CNC Crowning Tandem type Y1 / Y2 / X / V Axis 1 set tooling  

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158219299

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 6,00 mm Sheet width: 3050 mm Depth rear gauge: 750 mm Make Haco 3000 x 6 Type TS 306 Year 2000 haco schaar plaatschaar hydraulic guillotine Sheet thickness (mm) T = 6 mm Sheet width (mm) L = 3.050 mm Depth rear gauge (mm) D = 750 mm

Category: 106 presses
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163485363
New in: 2007

used

check Seller: GINDUMAC GmbH
Location: Land-be

add to watchlist

This HACO PPV 30220 Bending machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO ATL 550 control unit. The machine has a pressing force of 2200 kN and a bending length of 3000 mm.

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163485375
New in: 2007

used

check Seller: GINDUMAC GmbH
Location: Land-be

add to watchlist

This HACO HSL 3013 Shearing machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO SP8 control unit. The machine has a cutting thickness of 13mm

Category: 107 sheet metal working / CNC Punching Machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 159643734
New in: 2014

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 42.620 € add to watchlist

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163493414
New in: 2004

used

check Seller: GINDUMAC GmbH
Location: Land-pl

add to watchlist

This Haco TS 3012 Shearing machine was manufactured in the year 2004 in Belgium. It is equipped with HACO SP 8 control unit. The machine has a max cutting length of 3000 mm.

Category: 109 other metal working machines / Other Shears For Profiled Materials
Latest update: 25.10.2023 add to watchlist
approved
dealer
item-No.: 159919073
New in: 2018

used

check Seller: GINDUMAC GmbH
Location: Land-si

add to watchlist

BRAND: HACO YEAR: 2018 MODEL: HSLX 3006 APPLICATION TYPE: SHEARING LOCATION: SLOVENIA MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1750 MM MEASUREMENTS DEPTH: 3800 MM MEASUREMENTS HEIGHT: 1650 MM MACHINE WEIGHT: 5000 KG CONTROL UNIT BRAND: HACO MODEL: SC100 T Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WORKING WIDTH: 3050 MM - WORKING THICKNESS: 6 MM - MAX. CUTTING ANGLE: 3 MM - ENGINE POWER: 7. 50 KW

Category: 107 sheet metal working / Shears For Sheet Metal Working
Latest update: 21.11.2023 add to watchlist
approved
dealer
item-No.: 162844660
New in: 2004

used

check Seller: GINDUMAC GmbH
Location: 67663 Kaiserslautern Land-pl

add to watchlist

BRAND: HACO YEAR: 2004 MODEL: TS 3012 APPLICATION TYPE: SHEARING LOCATION: POLAND MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4200 MM MEASUREMENTS DEPTH: 2100 MM MEASUREMENTS HEIGHT: 2400 MM MACHINE WEIGHT: 8900 KG CONTROL UNIT BRAND: HACO MODEL: SP 8 MAIN DRIVE SPINDLE MOTOR POWER: 22.5 KW MEDIA MAIN ELECTRONIC CONNECTION: 380V / 50 HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX CUTTING LENGTH: 3000 MM - BACK GAUGE STROKE: 1000 MM - MAX CUTTING THICKNESS: 12 MM - CUTTING ANGLE: 0. 5-3 DEG QUALITATIVE MACHINE BENEFITS: - MACHINE CONNECTED, READY FOR TESTS. - ALL PICTURES ATTACHED HERE. THE SELLER WILL SEND US MORE DETAILED PHOTOS SOON

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163506042
New in: 1994

used

Seller: Exapro
Location: Land-pl
Price: 14.000 € add to watchlist

Gilotyna do blachy HACO TS 3012 wyprodukowana w 1994 roku w Belgii. Parametry techniczne: -· Made by :- HACO, Belgium · Model :- TS3012 · Year Of Manufacturing: - 1994 · Maximum cutting length: 3050 mm · Maximum cutting thickness: 12 mm · Back gauge stroke: 1000 mm · Main motor power: 22 kW · Maximum operating pressure: 260 bar · Oil tank capacity: approx. 220 Liter · Power supply: 380 V; 50 Hz · Approx weight of machine : 8900 kg

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163513639
New in: 2000

used

Seller: Exapro
Location: Land-pl
Price: 49.500 € add to watchlist

Hydraulic press brake: HACO Belgium type Euromaster ERM 300-200, rb: 2000/2022. Bending length: 3100 mm; Between columns: 2650 mm Loading: 250 mm, stroke 200 mm; Pressure: 200 t Kvara ESA S630 CNC-controlled press, Windows, graphics, Polish language, 2D simulation. Hydraulic guillotine for cutting sheet metal by HACO Belgium, type HSLX3013, 3100 mm x 13 mm (ST45), rb. 2001, CE compliant. SC7 CNC control. The machine has a quickly changing gap between the knives with CNC-controlled sheet thickness reading, and a hydraulically variable knife angle in the range of 1-3 degrees. Full Operation and Maintenance Manual, BiHP position manual in Polish.

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218633

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 3000 mm Knife length: 3000 mm MACH-id    5325 MAKE        HACO TYPE          TS 306 YOP            80 er SPECIFICATIONS Guillotine / Lazer / Cutting table        Guillotine Cutting lenght         3050 mm Maximum sheet thickness      6 mm Backgauge stroke X in mm        0 - 1000 mm DIMENSIONS Length       3600 mm Width         2100 mm Height        2000 mm

Category: 107 sheet metal working / Sheet Metal Shears
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794741

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218538

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Capacity: 320 t Folding length: 4100 mm CNC Brand: _Unknown / Other CNC Model: Robosoft ATS 900 MACH-id     5560 MAKE         HACO belgium TYPE           ERM 40320 YOP             2005 SPECIFICATIONS Max. bending length         4100 mm Distance between column        3150 mm Max. pressing force           320 T Dis. Beam - Table         500 mm Beam stroke                  250 mm Troth beam                     330 mm Approch speed               80 mm/min. Working speed                8 m ...

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218546

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 12,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm MACH-id    5484 MAKE         HACO TYPE           HSL 3012 YOP             90 er SPECIFICATIONS Maximum sheet thickness         12 mm Max. cutting length                    3100 mm Strokes on full length                 17 mm Strokes in short 1000 length       21 Cutting angle      0,5 - 3 ° Length backgauge        0 - 1000 mm Number off down holders        18 Approach speed         50 mm/sec. Power          15 kW DIMENSIONS  Length  &n ...

Category: 107 sheet metal working
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218635

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Sheet thickness: 13,00 mm void: 0 Table length: 4100 mm Table width: 4100 mm Knife length: 4100 mm MACH-id    5322 MAKE         HACO Belgium TYPE           HSLX 4013 YOP            2000 SPECIFICATIONS Control        Robosoft SC7p Guillotine / Lazer / Cutting table        Guillotine Cutting lenght        4100 mm Maximum sheet thickness        13 mm Backgauge stroke X in mm      0 - 1000 mm DIMENSIONS Length     4300 mm Width       2500 mm Height      2200 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online