ha used for sale

This 3-axis Hartford LG-1000 vertical machining center was manufactured in 2017. It features a 1150x510mm table with a load capacity of 700kg, an ATC with 24 positions, and a spindle speed of 8,000 rpm. The machine includes a FANUC 0iMF controller and linear guide ways. If you are looking to get high-quality milling capabilities, consider the Hartford LG-1000 machine we have for sale. Contact us for more information.

General SKU268N300 LocationBarneveld MakeHeraeus Hanau TypeRVT 500 No.7805013 Main Features MaterialAluminium Volume140 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 °C Number of compartments:1 Capacity140 Ltr Internal diameter485mm Internal depth750mm Electric heatingcheck Electric capacity2 kW 220 Volt Number of doors:1 With trayscheck MaterialAluminium Information Year of construction1978 Mounted on framecheck With switchcheck Floorspace1,0x0,7 M Total height1,6 M Weight150 KGDrying ovensHeraeus HanauDryers > Drying ovensBrand > Heraeus Hanau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...

This 3-axis Hartford HCMC 18 was manufactured in 2008. It features a Mitsubishi control unit, a table size of 2000 × 920 mm, and travels of 1800 mm in X, 920 mm in Y, and 700 mm in Z. Equipped with a 40-tool magazine and ISO 50 tool holder, it also includes high-pressure coolant. If you are looking to get high-quality milling capabilities consider the Hartford HCMC 18 machine we have for sale. Contact us for more information.

General SKU332X715 MakeKörting Hannover Mach.No.210-4-32860-3 Year of construction2014 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 Vacuum pumps Heat exchangercheck Horizontalcheck Tube capacity60 l. Number of tubes:64 Tube diameter17 mm Tube length2200 mm Max. temperature0°C/+80°C Shell diameter300 mm Shell length2400 mm Max. temperature0°C/+185°C Shell connectionsDN40 Cover connectionsDN80 Information Mounted on framecheck LocationBarneve ...

This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information.

pressure: t chamfer lenght: mm distance between columns: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information.

This 5-axis HAAS UMC-750 was manufactured in 2019, featuring a robust universal machining center with a 500 mm table diameter and a maximum table load of 300 kg. It includes a high-speed spindle up to 12,000 rpm, ISO 40 taper, and a 40-position tool changer. Ideal for complex geometries and diverse machining tasks. Contact us for more information about this machine.

This 3-axis Hartford Omikron VMC-1020 A was manufactured in 1998. Its a vertical machining center that recently had its X-axis bearings replaced. If you are looking to get high-quality milling capabilities, consider the Hartford Omikron VMC-1020 A machine we have for sale.Contact us for more information.

This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machines transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details.

This 3-axis HAAS VF 2 SS milling machine was manufactured in 2020. It features a robust inline direct-drive system, a spindle speed of up to 12000 rpm, and a spindle power of 22.4 kW. The machine accommodates a table load of 680 kg and offers rapid movements on X, Y, and Z axes at 35.6 m/min, enhancing productivity. Ideal for precision milling, the HAAS VF 2 SS machine we have for sale. Contact us for further details.

This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine.

This 4-axis HAAS MIKRON VCE 750 was manufactured in 2000. It features a table surface of 900x350 mm, a spindle speed of 8000 rpm, and a spindle motor power of 7.5 kW. Equipped with a conversational HAAS CNC, electronic handwheel, and a chip conveyor screw type, this vertical machining centre is ideal for detailed and precise machining tasks. Contact us for more information about this machine.

This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information.

A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible.

This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15 screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information.

cutting width: 3.400 mm Motor output: 2 x 1,1 kw kW weight of the machine ca.: ca. 400 kg saw blade diameter: 330 mm swivellable: -45, 90, +45 ° : 45, 90 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This HAAS EC-400 Machining centers (horizontal) machine was manufactured in 2022. It comes with two pallets, each measuring 400x400 mm, equipped with M12 threaded holes and centering holes. Its main spindle speed is 15000 rpm. It has a tool magazine with 50 slots, Renishaw tool setting and zeroing system, internal cooling via the main spindle, chip conveyor, and internal camera system. Contact us anytime for further information.

This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information.

faceplate diameter: 1.600 mm swing diameter: 2.000 mm turning height: 1.400 mm Control: Fanuc max. Torque: 23.863 Nm cutting capacity: max. 3.000 kgf max. workpiece weight: 10.000 kg table:: table diameter: 1.600 mm table speeds: 0,7 - 280 1/min power capacity - table: 37/45 kW C - Axis:: resolution: 0,001 ° Working speed: 0 - 1.200 °/min max. table speed: 3,333 1/min turret slide:: Shank diameter: 32 mm spindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1 power capacity - Tool Spindle: 15 / 18,5 kW max. Torque: 235 Nm ram cross section: 220 mm axis stroke:: x-axis: 1.900 mm z-axis: 900 mm cross rail adjustment: 700 mm Tool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos. max. tool weight: 50,0 kg draw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/min feed speeds: max. 7.500 mm/min rapid traverse of the crossrail: 300 mm/min total powe ...

This HAAS EC-400 Machining center (horizontal) machine was manufactured in 2020. It includes two 400x400 pallets with M12 threads and centering holes, a main spindle speed of 15000 rpm, and 50 tool slots. Additionally, it features a Renishaw tool setting and zeroing system, internal cooling through the main spindle, a chip conveyor, and an internal camera system. Contact us anytime for further information.

conus taper: 40 mm range L-W-H: H & K: 0,68 x 0,45 x 0,45 mm weight: - kg range L-W-H: Hoffman: 0,72 x 0,5 x 0,4 mm Tool rack for ISO 40 chucks. 1 x Hahn & Kolb (blue), 54 spaces, plastic frame = €380 Dimensions: 0.68 x 0.45 x 0.45 m 2 x Hoffman (green), 42 spaces each, sheet metal frame = €320 each Dimensions: 0.72 x 0.5 x 0.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis HAAS UMC-1000SS was manufactured in 2020. It features a large working envelope with X, Y, and Z axes measuring 1016 mm, 635 mm, and 635 mm respectively. Ideal for complex geometries and multi-sided machining. Consider the opportunity to buy this HAAS UMC-1000SS universal machining centre. Contact us for more information.

General SKU427X1329 LocationBarneveld CEcheck MakeFlowserve Pressure Working pressure25 Bar Main Features MaterialHastelloy Volume30000 Ltr. Motor2.2 KW Specified Features - Centrifugal Pump MaterialStainless steel 2.4819 (Hastelloy C-276) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity± 10-30 m³/h With motor2,2 kW (400 V, 2877 rpm (Ex)) InletDN32 OutletDN50 Information TypeMARK 3 ISO Mach.No.ES1824032-01 Year of construction2020 Mounted on framecheck Floorspace0,9 x 0,4 m Total height0,5 m Weight120 kg ATEX compatiblecheckCentrifugal PumpsFlowservePumps > Centrifugal PumpsBrand > Flowserve What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

This 3-axis HAAS VF-8 vertical machining center was manufactured in 2003. It features a 1626 x 1016 x 762 mm travel range, a 15.4 kW spindle power, and a maximum spindle speed of 7500 rpm. Equipped with a BT-40 tool holder, a 24+1 position tool changer, and a screw-type chip conveyor. If you are looking to get high-quality milling capabilities consider the HAAS VF-8 machine we have for sale. Contact us for more information.

General SKU397X1124 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature0 — 200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.5714.02-07 Year of construction2007 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

This 3-axis HAAS VF3 SS Machining Center was manufactured in 2017. It features a robust 1219 mm x 457 mm table, capable of handling up to 794 kg. Equipped with a high-speed spindle reaching 12000 rpm and a 30+1 side-mount tool changer for efficient operation. Ideal for precision tasks with rapid movements up to 35.6 m/min on all axes. A great opportunity to buy this HAAS VF3 SS Machining Center. For more information about this Machining Center, please reach out to us.

This 3-axis HAAS VF-3SS Machining Centre was manufactured in 2021. It features a robust 1219 mm x 457 mm table, capable of handling up to 794 kg. Equipped with a high-speed 12000 rpm spindle, it delivers 22.4 kW of power and 122.0 Nm torque. The machine offers rapid movements up to 35.6 m/min on all axes and includes a 30+1 side-mount tool changer for efficient operation. Ideal for precision machining, buy this HAAS VF-3SS Machining Centre. Contact us for further details.

This 3-axis milling machine was manufactured in 2014. Equipped with a powerful 22.4 kW spindle and precise positioning accuracy of 0.005 mm, this HAAS VF-3 offers exceptional performance for machining tasks. Its 20-tool horizontal carousel magazine ensures efficient tool changes, while the 15 LCD color monitor enhances user interface. With a maximum table load of 1588 kg and rapid traverse rates of 25.4 m/min, buy this HAAS VF-3 milling machine for versatile and reliable production capabilities. Contact us for further information.

This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine.

General SKU397X1125 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.559602 Year of construction2000 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

This 3-axis Tecnology HACO Q5 was manufactured in 2014. A robust punching machine capable of handling sheet sizes up to 1500x3000 mm and material thickness up to 6 mm for carbon steel. It includes 20 tool stations, enhancing its versatility. Ideal for those looking to buy this Tecnology HACO Q5 punching machine. Contact us for further details regarding this punching machine.

General SKU311X478 MakeRiera Nadeu LocationBarneveld CEcheck TypeRina 700F 800X400 PI Main Features MaterialHastelloy Motor37 KW Inlet diameter100 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesø 800 mm Max. loading weight125 kg Motor37 kW (400 V, 1480 rpm, (Ex)) Max. basket speed2150 rpm Hydraulic operatedcheck With hydraulic unitcheck InletDN100 Solids outletDN150 Liquid outletDN100 MaterialStainless steel 2.4602 (Hastelloy C-22) Information No.10573 / P19 / 00718 Year of construction2020 Mounted on foundation platecheck Floorspace2,626 x 2,250 m Total height1,930 m Weight8900 kg Extra SpecificationsProduct density 1250 kg/m3, G force 2000 G, :Peeling centrifugesRiera NadeuCentrifuges > Peeling centrifugesBrand > Riera Nadeu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.

This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information.

This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine.

This 5-axis HAAS TR-310 was manufactured in 2018. It features a table diameter of 310 mm, a maximum part swing of 787 mm, and can handle loads up to 227 kg. With a maximum rotation speed of 50°/sec and travel range of ±120°, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the HAAS TR-310 machine we have for sale. Contact us for more information about this machine.

This 3-axis HAAS VF-5/50XT was manufactured in 2012, designed for robust vertical machining. It operates on a voltage of 360/480, with a 3-phase power supply and a frequency range of 50/60 Hz. The machine handles a full load of 45 amps and a largest load of 70 amps. If you are looking to get high-quality milling capabilities, consider the HAAS VF-5/50XT machine we have for sale. Contact us for more information.

This 3-axis HAAS VF 11/50 was manufactured in 2011. It features a robust CNC control, a large table surface of 3048 × 711 mm, and can handle a maximum load of 1814 kg. With X, Y, Z travels of 3048 mm, 1016 mm, and 762 mm respectively, it offers extensive working range. The spindle can reach up to 7500 rpm, and it includes a 30+1 random tool changer. Consider the opportunity to buy this HAAS VF 11/50 vertical machining centre. Contact us for more information.

This 4-axis vertical machining centre was manufactured in 2018. Equipped with a controlled 4th axis (HRT300), it boasts a main spindle speed of 15000 rpm and 30 tool slots for versatile operations. Renishaw tool setting ensures precision, while internal cooling via the main spindle enhances efficiency. With 22856 total running hours, this HAAS VF-3SS is meticulously maintained, resembling a new machine. Consider this Haas VF-3SS vertical machining center for a seamless production experience. For further information, please contact us.

This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine.

This Hüttenhölscher Line multi-spindle drilling machine was manufactured in 2012. It features a PC-controlled function sequence under Windows 7 with TwinCAT, a 6-station loading gantry, and a 2-axis gantry robot. The machine includes a vacuum generation by ejector and multiple conveyor lines for efficient material handling. Ideal for high precision drilling with its advanced control system. Contact us for more information about this machine.