ha used for sale

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 20 mm   external diameter max.: 70 mm   wall thickness min.: 1 mm   wall thickness max.: 6.5 mm MACHINE CHARACTERISTICS SWAGING   force: 630 kN   stroke rate (max.): 630 /min ELECTRICAL SPECIFICATIONS   total power consumption: 40 kW Tube pointing machine HAGINGER AHM 63 with slide feeder S - Material: Steel tubes with a strength of 800 N/sqmm - Max. forming force: 4 x 630 kN - Drive motor power: 30 kW

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

General SKU043R200 MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88 LocationBarneveld Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill MaterialStainless steel 2.4602 (Hastelloy C-22) Hammer Mills Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Information Floor space1,7x0,7 m Total height1,2 m Weight800 KgHammer MillsDiscountEngelsmannMills > Hammer MillsDiscountBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cagecheck 2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Hammer Mills MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Information TypeSmimo-MI-100L No.010.00.01.001 Year of construction1999 Mounted on framecheck With switchcheck With switchgearcheck Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a ...

General SKU027E101 MakeApex Construction Ltd. Type114 DW-SF No.A-40880 Year of constructionunknown Mounted on framecheck Main Features Motor22 KW Inlet diameter260 mm Width295 mm Specified Features - Hammer Mill Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) Hammer Mills Hammer millComminuting mill (1x) Rotor sizedia. 260x295mm Fixed hammerscheck With sieve cagecheck Inlet/feeding through twin screw metering screw Motor22,0/30,0 KW, 380/660 Volt, 1470rpm Speed750rpm Information LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace2,0x1,3 M Floor space2,0x1,3 m Total height2,4 M Weight900 KG Extra SpecificationsDosing screw Motor 0.55 kW Gearbox output 5.7 - 34 rpm (manual variator) Dosing screw capacity: maximum 4.5 m3/h Sieve cages: 3 pieces ( 2 x pore size 1.25 mm: 1 x 1.75 mm) Hammer MillsDiscountApexMills > H ...

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 32 mm, Bolt center: Ø 25 mm, Bottom bolt: Ø 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!

BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 32 mm, Bolt center: Ø 25 mm, Bottom bolt: Ø 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!

BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 32 mm, Bolt center: Ø 25 mm, Bottom bolt: Ø 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

BIG weld-on hook suitable for Kramer mini mount, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 31 mm, Bottom bolt: Ø 38 mm, Bolt center-to-center distance: 247 mm, Further recordings also available!

BIG weld-on hook suitable for Kramer mini mount, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 31 mm, Bottom bolt: Ø 38 mm, Bolt center-to-center distance: 247 mm, Further recordings also available!

BIG weld-on hook suitable for Kramer mini mount, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 31 mm, Bottom bolt: Ø 38 mm, Bolt center-to-center distance: 247 mm, Further recordings also available!

BIG weld-on hook suitable for Dieci Agri Farmer attachment, - Year of construction: 20255, - made of S355 steel, Dimensions of the mount:, Bolt diameter above: 61 mm, Bolt diameter below: 45 mm, Bolt spacing [Center - Center]: 350 mm

BIG weld-on hook suitable for Dieci Agri Farmer attachment, - Year of construction: 20255, - made of S355 steel, Dimensions of the mount:, Bolt diameter above: 61 mm, Bolt diameter below: 45 mm, Bolt spacing [Center - Center]: 350 mm

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

PRICE REDUCED -10%: € 675, - instead of € 750, - net excl. 20% VAT, Manitou / Merlo / JCB Q fit / Euro adapter suitable for three-point mount KATII, 130 kg net weight

PRICE REDUCED -10%: € 675, - instead of € 750, - net excl. 20% VAT, Manitou / Merlo / JCB Q fit / Euro adapter suitable for three-point mount KATII, 130 kg net weight

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

NEW, 1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Terex TL80, Also other recordings such as Atlas, Avant, Cat, Claas, Deutz Fahr, Euro, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Volvo, Weidemann, Zettelmeyer available!

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

NEW, suitable for CAT TH407

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

used, kpl. 1 year warranty, built in 1999, plate size 1200 x 1200 mm, 70 plates with 50mm cake thickness (3500 liters capacity + 160 m2 filter area) or 90 plates with 30 mm cake thickness (2700 liters capacity + 205 m2 filter area), open outlet, pressure max. 15 bar, dimensions 9000 x 2000 x 2400 m m, weight approx. 18 to, PP - drip plate (motorized)

in stainless steel sliders, t-pieces, flanges, etc. Price piece: from EUR 80,00 Pipes available approx. 800m Price /m: from 40,00 by DN 50 - DN 120 various steam control valves Price piece: from EUR 180,00

Deltapilot S Endress+Hauser unused / like new Technical Details: Typ: DB50L-AC44BD13EG20 IP66/NEMA4X CONTITE VA 0 - 4000 mbar

AT-Motoren alle sofort ab Lager lieferbar mit Garantie MIW GmbH Motoren-Instandsetzungs-WerkNord-West-Ring 8 27404 Zeven-Germany Tel.0049(0)-4281-950583 Fax.0049(0)-4281-950585 email=info@miw-zeven.de

AT-Motoren alle sofort ab Lager lieferbar mit Garantie info@miw-zeven.de

Semiautomatic Etikettierer fair model - Hence, as good as new state Bj.2012 donation possibilities: 1 label: 2 etiquettes: Orients: Straightened in the bundle other infos on inquiry

Haffmans/Norit inline carbonator, fo inline adding CO2 to beverages. Only used for R&D activity's. CO2 flowmeter is missing, otherwise in good condition.

QTY.2 ROLL STRIP CASTERS, STRI WIDTH: 1730 MM, THICKNESS: 4.0 - 10.0 MM, QTY: 1 TWIN BELT CASTER, STRIP WIDTH: 1930 MM; THICKNESS: 15.9 - 19.0 MM

Haffmans/Norit karbonisierer, fuer inline karbonisierung von Getränken. Nur verwendet für Testzwecke. Durchflussmesser fehlt, weiter guten zustand.

Grote & Hartmann, 380V,50 Hz, 0, 45Kw, Fabrikatnr. 5618/84

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

Ladies and gentlemen, we are able to offer larger quantities of chopping chips in the long term. We would be pleased to have an inquiry. Yours sincerely Trade & Translations

Handtmann VF 200 Filling portioning linking MC control Loading device The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Flaring system for sewage gas combustion - Mint- Manufacturer: Haase Maximum flow rate: 10 m³/h Gas pressure: 15-50 mbar Material: Stainless steel (V4A) Diameter: 150 mm Total height: 4.500 mm Emissions: CO2 and NOx to TA-Luft in the range of 50-100% of the maximum power. Flaring system is unused. Only a test run was conducted so as new and in very good condition! System is still built and can be visited at any time!