ha ro used for sale

ApenGroup LRP28DE Gas Heat Heaters Gas Type: G20 Natural Gas Connection pressure: 20 mbar Nominal heat load QN: 27 kW Nominal heat output: 24.63 kW Connection voltage: 230V 1N ,50Hz Air flow: 2700 m3/h Degree of protection: IP20 More items - new and used - can be found in our shop! International shipping costs on request!

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: ca. 5 t dayligth: 110 mm throat: 40 mm weight of the machine ca.: ca. 50 kg dimensions of the machine ca.: 1,2 x 0,5 x 1,3 m Function: ready for operation: 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This FMB Turbo 8-80 was manufactured in 2012. It is a work piece handling system connected to Okuma, offering efficient handling capabilities. Consider the opportunity to buy this FMB Turbo 8-80 work piece handling system. Contact us for more information.

DELTA Hand Winch Type HW 0.5t. Bj 2022, used, ready for use

Ceiling heating Vacurant Industrie Manufacturer: Vacurant Type: Ceiling Heating Energy source: Gas Location: Paderborn

Stock number: F984, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Bag welder, Standing: Table model, Motor: 230 Volt - 500 Watt, Welding: For continuous welding, Welding speed: 10 mtr/min., Manufacturer: Hawo, Model: HM 850 DC

Stock number: F1045, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Rotary sealing unit, Standing: Table model, Motor: 500 Watt - 230 Volt, Manufacturer: Hawo, Type: HM500 DEL, Other: Feeding from the left

Fully functional Eldec hardening plant Year of Make: 2014 Type: MIND 750 CNC Machine Number: KA20130186 Serial Number: SY14001 Operating hours: 32,767 h Accessories: KLH Tank Pumps Heat Exchanger Station TPW100 TPW100-00-ELD Year of construction 2013 Location of the machine: 73430 Aalen The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

An old hardness tester is offered. It still has the old, extremely stiff frame, which is no longer used today. There are nine Rockwell diamonds, of which at least three are still new.

sheet width - max.: 1020 mm plate thickness: 1,5 mm cutting length: 1020 mm weight: ca. 300 kg dimensions of the machine ca.: 1,3 x 0,8 m Condition: good, demo machine: Side stop: 600 mm Material place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder with Quick clamping, mm scale on the table, pull-out sheet metal support. Demonstration machine at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

deal for mozzarella sticks up to 27 cm long and a diameter of 5 cm. Completely in stainless steel

Demonstration device Hand punch incl. 4-piece haulm divider and haulm plate DIMENSIONS Length 840 mm Width 585 mm Height 1120 mm Weight 42 kg

Cutting range at 90° Round: 210 mm Square: 210 mm Flat: 240 x 190 mm Cutting range at 45° Round: 150 mm Square: 150 x 100 mm flat: 150 x 100 mm Saw blade dimensions: 400 x 30 x 1.5 mm 2 lifting speeds by pole switching. Motor: 16 & 32 m/min Drive motor: 380 V, 0.9 kW Weight: 170 kg Space requirement: 1190 x 480 x 1300 mm

Key data: 320 mm

Machine type: Automatic band saw Manufacturer: Jaespa Type: W320AZ Year of Make: 2002 Condition: used / gearbox damage Price Vb Location Warstein , Germany Reference number M-JAE-0226 DESCRIPTION We offer you a used band saw from the manufacturer Jaespa. Gearbox needs to be replaced. Weight approx. 2t Available now. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Capacity 7.25T /16000lbs Stroke 1727 mm weight 270t

Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t

Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t

Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.

- Shredding line for the treatment of recycled wood, pallets and industrial waste. - Includes: • Feed hopper with metal chain conveyor for material loading. • CASSEL metal removal system. • HAMMEL NZ-S 1000 D shredder: motor power 250 KW-1485 rpm, rotor diameter 1000 mm, rotor length 1500 mm, 72 knives, control panel. • Conveyor belts marked with a red X in photo number 3 are not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-1

Cutting area round/square: 190/190 x 190 mm Cutting area in mitre 45° round/rectangle: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 Lifting speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Space requirement: 1200 x 600 x 980 mm

Offer 26072 Technical data : - Rope balancer with load capacity of approx. 60 kg - Articulated arm with projection approx. 3.6 m - Swivel range approx. 375 ° - Hackenweg approx. 2.0 m - Total height approx. 3.2 mm - Pneumatic connection 6 bar - Net weight approx. 300 kg

Offer 26075 Technical data : - Rope balancer with load capacity of approx. 60 kg - Articulated arm with projection approx. 3.6 m - Swivel range approx. 375 ° - Hackenweg approx. 2.0 m - Total height approx. 3.2 mm - Pneumatic connection 6 bar - Net weight approx. 300 kg

Handlebar scooter for transport scooter( 4 pieces )suitable for Euroscooter for boxes 60 x 40 cmForks: galvanizedRubber wheels with back holeincl. Connecting screw and nutDetails see picture

Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 5,1kW Two lanes Additional information conveyor for packages available

Spur gear chain hoist, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1500 kg -Travel distance: 4.8 m -Chain: with ring eyelet, without hook -Dimension: 260/300/H500 mm -Weight: 51 kg

Spur gear pulley, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, hand trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley, under-flange trolley -Load capacity: 5000 kg -Hub travel: 4.0 m -Dimensions: 500/400/H800 mm -Weight: 165 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Manufacturer: Unseld, two-hand control panel from Dorstener APE80-3050 press brake -Type: SEP03.0.L1/stand STP 01.4.1 -Accessories: including foot switch -Dimensions: Ø 500 x 1000 mm -Weight: 23 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector -Manufacturer: Nilfisk, Bent End Plastic Tube Ø 40 VA unused OVP -Type: 107402631 -Diameter: Ø 45 mm -Number: 4x pipe available -Price: per piece -Dimension: Ø 48 x 320 mm -Weight: 0.1 kg/piece

Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi Art.Nr .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc.

Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Assembly star, assembly table, workbench, welding table, clamping plate, turning device, container turning device, welding turning device -Carrier frame for: BMW engines 4/6 cylinder -with: locking -Load capacity: kg -Working width: 250 mm -Working height: 180 mm -Dimensions: 550/360/H445 mm -Weight: 130 kg

Hand lever shears, long-blade sheet metal and round steel shears -Peddinghau:s 4R/7, long-blade sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance rating for: Material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg

Hydraulic cylinder, support cylinder -Piston diameter: approx. 130 mm -Piston rod: 100 mm -Stroke: approx. 700 mm -with support rollers -each cylinder with hand pump -Number: 3 cylinders available Price: per piece

Hand hydraulic pump, hand pump, hydraulic cylinder, pot winch, hydraulic winch, Hydralite Jacks -Max. lifting capacity: 100 tons -Hydraulic cylinder stroke: 160 mm -Number: 2 cylinders available -Quantity: 1x cylinder as spare parts carrier (without pump) -Price/Sale: complete -Dimensions: 400/240/H370 mm -Total weight: 104 kg

Tenoning machine, tenoning machine, tenon hammer, slot rotor, finger jointing system -Recovering rotor: 2.2 kW 5650 rpm -Socket: Ø 30 mm -Saw motor: 3.5 kW 2870 rpm -Bore heads: 0.8 kW 2820 rpm -Adjustable drilling distance: 230-560 mm -Frequency converter Perske type: 7.5DW10/2 100 Hz 7.5 kVA -Length stop -Workpiece clamping: pneumatic -pneumatic feed -Dimensions: 1520/1800/H1400 mm -Weight: 1600 kg

Handpieces, for flexible shaft machine, quill machining unit, drilling machine, drilling machine, pillar drill, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Suhner -Drawing No.: 010 281 02 -without: drive -Hole: Ø 14 mm -Quantity: 5 pieces available -Price: per piece -Dimensions: 140/33/H33 mm -Weight: 6 kg/piece

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Bahco, hydraulic pump hand pump, two-stage -Type: P2508 -Pressure range: up to 80 Mpa / 800 bar -Oil volume: 2.5 L -Quantity: 6x hand pump available -Price per piece -Dimension: 600/145 / H180 mm -Weight: 14 kg/pc.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: Bahco, hydraulic hand pump, two-stage -Type: P1008 -Pressure range: up to 80 MPa / 800 bar -Oil volume: 1 L -Number: 12 hand hydraulic pumps available -Price: per piece -Dimensions: 600/120/H190 mm -Weight: 11.3 kg/pc.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: FAG, hydraulic pump, hand pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Price: per piece -Dimensions: 660/170/H200 mm -Weight: 6.8 kg/pc.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: Lukas / Frieseke and Hoepfner, hydraulic pump hand pump -Type: 84077 -Pressure range: max. 450 bar -Number: 3x hand pump available -Price: per piece -Dimensions: 600/160/H190 mm -Weight: 8.3 kg/pc.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas / Frieseke and Hoepfner, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 450 bar -Number: 12x hand pumps available -Price: per piece -Dimensions: 660/180/H200 mm -Weight: 6.9 kg/piece

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas / Frieseke and Hoepfner, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 450 bar -Quantity: 2x hand pump available -Price per piece -Dimensions: 660/270 / H200 mm -Weight: 9 kg/pc.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: FH / Frieseke and Hoepfner, hydraulic pump hand pump -Type: WKP 3 -Pressure range: max. 450 bar -Quantity: 2x hand pump available -Price per piece -Dimension: 700/210 // H200 mm -Weight: 13.8 kg/pc.